P0698 Hyundai Code - Sensor Reference Voltage 'C' Circuit Low
Quick Answer
The P0698 code for Hyundai vehicles indicates an issue with the Sensor Reference Voltage 'C' circuit being too low. Common causes include Faulty sensor reference voltage regulator, Short circuit or open circuit in the sensor reference voltage 'C' circuit, Corrosion or poor connections in the wiring harness. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0698 Hyundai indicates Sensor Reference Voltage 'C' Circuit Low.
- Common causes
- Common causes include Faulty sensor reference voltage regulator, Short circuit or open circuit in the sensor reference voltage 'C' circuit, Corrosion or poor connections in the wiring harness.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0698 Hyundai Description
The P0698 code for Hyundai vehicles indicates an issue with the Sensor Reference Voltage 'C' circuit being too low. The sensor reference voltage is essential for proper operation of various sensors in the vehicle, as it provides a stable electrical signal for accurate data readings. When the sensor reference voltage is too low, it can lead to incorrect sensor readings and potentially affect the performance of the vehicle.
Common Causes of P0698 Hyundai
- Faulty sensor reference voltage regulator
- Short circuit or open circuit in the sensor reference voltage 'C' circuit
- Corrosion or poor connections in the wiring harness
- Defective PCM (Powertrain Control Module)
- Electrical issues such as a blown fuse or relay
Symptoms of P0698 Hyundai
- Engine misfires
- Rough idling
- Poor fuel economy
- Stalling
- Check Engine Light illuminated
How to Fix P0698 Hyundai
- Diagnose the issue by using a diagnostic scanner to retrieve the fault code and perform a thorough inspection of the sensor reference voltage 'C' circuit.
- Inspect the wiring harness for any signs of damage, corrosion, or poor connections. Repair or replace as needed.
- Check the sensor reference voltage regulator for proper operation. Replace if faulty.
- Test the PCM to ensure it is sending the correct reference voltage signals. Replace if necessary.
- Clear the fault code and test drive the vehicle to verify that the issue has been resolved.
Cost to Fix P0698 Hyundai
The cost of repairing a Sensor Reference Voltage 'C' Circuit Low issue can vary depending on the specific cause of the problem and the extent of the repairs needed. On average, the parts required for this repair can range from $50 to $200, while the labor costs can range from $100 to $300. Overall, the total repair cost for this issue can be estimated to be between $150 and $500. It is recommended to consult with a qualified mechanic or repair shop to get a more accurate cost estimate based on the specific circumstances of your vehicle. Labor rates and diagnostic fees can also vary based on location and the type of repair facility.
Need more information about the P0698 Hyundai code?
Need more information on how to fix the P0698 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0698 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0698 Hyundai Code
1. What does the OBDII code P0698 mean on a Hyundai?
P0698 indicates a low voltage issue in the Sensor Reference Voltage 'C' Circuit, which affects the sensors relying on this circuit for proper operation.
2. What are common symptoms of code P0698 on a Hyundai?
Symptoms may include the Check Engine Light turning on, poor engine performance, difficulty starting, and possible communication issues with certain sensors.
3. What causes the P0698 code to appear on a Hyundai?
Potential causes include a damaged or corroded wiring harness, a faulty sensor, a defective Engine Control Module (ECM), or a short circuit in the reference voltage line.
4. Can I drive my Hyundai with a P0698 code?
While the vehicle may still be drivable, ignoring the issue could lead to worsening performance or damage to related sensors and components. Immediate diagnosis is recommended.
5. How do I diagnose a P0698 code on a Hyundai?
Start by inspecting the wiring and connectors in the 'C' circuit for damage or corrosion, test the reference voltage with a multimeter, and check for sensor malfunctions.
6. Which sensors are affected by the P0698 code on a Hyundai?
The specific sensors affected depend on the 'C' circuit in your vehicle, which can include throttle position sensors, MAP sensors, or other components.
7. Can a faulty ECM cause a P0698 code?
Yes, a malfunctioning Engine Control Module can disrupt the reference voltage and trigger this code, though it's a less common cause.
8. What tools are needed to fix a P0698 code on a Hyundai?
Basic tools include a multimeter for voltage testing, a scan tool for clearing the code, and wiring repair tools if damage is found.
9. How much does it cost to fix a P0698 code on a Hyundai?
Repair costs vary but can range from $50 to $150 for wiring repairs, while replacing a sensor or ECM may cost $200 to $1000 depending on the part and labor.
10. Can clearing the code fix the P0698 issue on a Hyundai?
Simply clearing the code will not fix the underlying issue. Proper diagnosis and repair of the circuit or related components are necessary to resolve the problem.
Discuss the causes and fixes for P0698 Hyundai OBDII Code
Code P0698 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.