Engine-Codes.com
Engine-Codes – Ford – P0690 2008 Ford Fusion

P0690 2008 Ford Fusion Code - Electronic Control Module Power Relay Sense Circuit High

Quick Answer

The P0690 diagnostic trouble code (DTC) for a 2008 Ford Fusion refers to the Electronic Control Module (ECM) Power Relay Sense Circuit High. Common causes include Faulty power relay, Damaged wiring or connectors in the power relay sense circuit, Malfunctioning ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0690 2008 Ford Fusion indicates Electronic Control Module Power Relay Sense Circuit High.
Common causes
Common causes include Faulty power relay, Damaged wiring or connectors in the power relay sense circuit, Malfunctioning ECM.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 17, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0690 2008 Ford Fusion Description

The P0690 diagnostic trouble code (DTC) for a 2008 Ford Fusion refers to the Electronic Control Module (ECM) Power Relay Sense Circuit High. This code indicates that there is a high voltage condition detected in the power relay sense circuit of the ECM. The ECM is a crucial component of the vehicle's engine management system, responsible for controlling various functions such as fuel injection, ignition timing, and emissions control. The power relay sense circuit is designed to monitor the voltage level of the power relay that supplies power to the ECM.

OBDII Code P0690 2008 Ford Fusion - Electronic Control Module Power Relay Sense Circuit High
P0690 2008 Ford Fusion Code - Electronic Control Module Power Relay Sense Circuit High

Common Causes of P0690 2008 Ford Fusion

  1. Faulty power relay
  2. Damaged wiring or connectors in the power relay sense circuit
  3. Malfunctioning ECM
  4. Corrosion or poor connections in the power relay circuit
  5. Electrical issues such as short circuits or voltage spikes

Symptoms of P0690 2008 Ford Fusion

  1. Reduced engine power
  2. Poor fuel efficiency
  3. Rough idling
  4. Hesitation during acceleration
  5. Difficulty starting the vehicle

How to Fix P0690 2008 Ford Fusion

  1. Begin by conducting a thorough inspection of the power relay, wiring, and connectors in the power relay sense circuit.
  2. Test the power relay using a multimeter to check for proper voltage levels and continuity.
  3. Inspect the ECM for any signs of damage or malfunction.
  4. Repair or replace any damaged wiring, connectors, or components as necessary.
  5. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P0690 2008 Ford Fusion

The typical repair costs for addressing a P0690 code on a 2008 Ford Fusion can vary depending on the specific cause of the issue. In general, the cost of replacing a faulty power relay or repairing damaged wiring may range from $100 to $300, including parts and labor. However, if the ECM needs to be replaced, the cost can increase significantly, potentially ranging from $500 to $1000 or more. It is important to note that diagnosis time and labor rates at auto repair shops can vary, so it is advisable to check with local shops for a more accurate estimate.

Need more information about the P0690 2008 Ford Fusion code?

Need more information on how to fix the P0690 2008 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0690 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0690 2008 Ford Fusion Code

1. What are the common symptoms of OBDII code P0690 on a 2008 Ford Fusion?

- Common symptoms include the vehicle stalling or not starting, reduced engine performance, and the Check Engine Light illuminating.

2. What does the OBDII code P0690 "Electronic Control Module Power Relay Sense Circuit High" mean for a 2008 Ford Fusion?

- This code indicates that the power relay sense circuit for the Electronic Control Module (ECM) is detecting a high voltage condition.

3. What are the possible causes of OBDII code P0690 on a 2008 Ford Fusion?

- The code can be triggered by issues with the ECM power relay, faulty wiring or connectors in the power relay sense circuit, or a malfunctioning ECM.

4. How can I diagnose the OBDII code P0690 on my 2008 Ford Fusion?

- Diagnosis typically involves checking the power relay and related wiring for faults, testing the ECM power relay, and inspecting the ECM for any signs of damage.

5. Can I still drive my 2008 Ford Fusion with OBDII code P0690?

- It is not recommended to drive the vehicle with this code present, as it can lead to further damage or safety issues. It's best to address the underlying problem promptly.

6. How can I repair OBDII code P0690 on a 2008 Ford Fusion?

- Repair options may include replacing the ECM power relay, repairing any damaged wiring or connectors, or replacing the ECM if it's found to be faulty.

7. Is it possible to reset OBDII code P0690 on a 2008 Ford Fusion without fixing the issue?

- Resetting the code without addressing the underlying problem is not recommended, as the issue will likely persist and could potentially worsen over time.

8. Are there any common mistakes to avoid when dealing with OBDII code P0690 on a 2008 Ford Fusion?

- Avoid overlooking basic checks like inspecting fuses, relays, and wiring connections before moving on to more complex diagnostic and repair procedures.

9. How much does it typically cost to fix OBDII code P0690 on a 2008 Ford Fusion?

- The cost of repair can vary depending on the exact cause of the issue, but it may range from a few hundred to a thousand dollars, including parts and labor.

10. Can a DIY enthusiast with basic automotive knowledge fix OBDII code P0690 on a 2008 Ford Fusion?

- While some DIYers may be able to address simpler causes like faulty relays or wiring, diagnosing and repairing complex ECM issues may require professional expertise.

Discuss the causes and fixes for P0690 2008 Ford Fusion OBDII Code

Submit a New Comment

Code P0690 2008 Ford Fusion comments

No comments found for this page.