P0686 Jeep Code - Engine Control Module Power Relay Control Circuit Low
Quick Answer
The P0686 engine code for Jeep vehicles indicates a problem with the Engine Control Module (ECM) Power Relay Control Circuit being low. Common causes include Faulty power relay control system, Damaged ECM, Blown fuse related to the ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0686 Jeep indicates Engine Control Module Power Relay Control Circuit Low.
- Common causes
- Common causes include Faulty power relay control system, Damaged ECM, Blown fuse related to the ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0686 Jeep Description
The P0686 engine code for Jeep vehicles indicates a problem with the Engine Control Module (ECM) Power Relay Control Circuit being low. The Engine Control Module, also known as the ECM or ECU, is a crucial component of a vehicle's electronic system. It controls various functions within the engine, such as fuel injection, ignition timing, and emissions control. The Power Relay Control Circuit is responsible for regulating the power supply to the ECM. When the circuit is detected to be low, it means that there is a problem with the power relay control system, which can lead to issues with the engine's performance.
Common Causes of P0686 Jeep
- Faulty power relay control system
- Damaged ECM
- Blown fuse related to the ECM
- Loose or corroded electrical connections
- Issues with the battery or alternator
Symptoms of P0686 Jeep
- Engine misfires or hesitation during acceleration
- Difficulty starting the vehicle
- Illumination of the Check Engine Light
- Reduced fuel efficiency
- Rough idling or erratic engine behavior
How to Fix P0686 Jeep
- Perform a thorough inspection of the power relay control system, including the relay, wiring, and connections.
- Test the ECM to ensure it is functioning properly.
- Check and replace any blown fuses related to the ECM.
- Repair or replace any damaged wiring or connectors.
- Clear the error code and reset the ECM to see if the issue has been resolved.
Cost to Fix P0686 Jeep
The typical repair costs for addressing the P0686 engine code in a Jeep vehicle can range from $150 to $500, depending on the specific cause of the issue and the extent of the repairs needed. This estimate includes the cost of parts and labor. It's important to note that the actual cost may vary based on factors such as the location of the repair shop, the vehicle's make and model, and the local labor rates. It is recommended to consult with a certified mechanic to get an accurate estimate for the repair.
Need more information about the P0686 Jeep code?
Need more information on how to fix the P0686 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0686 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0686 Jeep Code
1. What are the common symptoms of OBDII code P0686 in a Jeep?
- Common symptoms include engine misfires, stalling, rough idling, and difficulty starting the vehicle.
2. What can cause the OBDII code P0686 in a Jeep?
- The code P0686 is typically triggered by a faulty engine control module (ECM) power relay or issues with the relay control circuit.
3. How can I diagnose the cause of the OBDII code P0686 in my Jeep?
- To diagnose the issue, you can use a multimeter to test the ECM power relay and check the wiring and connections in the relay control circuit for any faults.
4. What are some repair tips for fixing the OBDII code P0686 in a Jeep?
- Repairing the code P0686 may involve replacing the ECM power relay, repairing any damaged wiring or connectors in the relay control circuit, or reprogramming the ECM.
5. Can driving with the OBDII code P0686 in a Jeep cause further damage to the vehicle?
- Continuing to drive with the code P0686 may lead to more severe engine performance issues and potential damage to other components, so it is recommended to address the problem promptly.
6. How much does it typically cost to repair the OBDII code P0686 in a Jeep?
- The cost of repairing the code P0686 can vary depending on the specific cause of the issue, but it may range from $100 to $300 for parts and labor.
7. Is it safe to continue driving my Jeep with the OBDII code P0686?
- It is not recommended to drive the vehicle with the code P0686, as it can lead to further engine problems and potential safety hazards on the road.
8. Can a DIY enthusiast fix the OBDII code P0686 in a Jeep?
- If you have the necessary tools and knowledge, you may be able to diagnose and repair the code P0686 yourself, but it is advised to consult a professional if you are unsure.
9. How long does it take to repair the OBDII code P0686 in a Jeep?
- The repair time for the code P0686 can vary depending on the exact cause of the issue and the complexity of the repair, but it may take a few hours to a full day to complete.
10. Will resetting the OBDII code P0686 in my Jeep make it go away permanently?
- Resetting the code may temporarily clear it, but if the underlying issue is not fixed, the code is likely to reappear. It is important to diagnose and address the root cause of the problem for a permanent solution.
Discuss the causes and fixes for P0686 Jeep OBDII Code
Code P0686 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.