P0685 2009 Ford Fusion Code - Powertrain Control Module Power Relay Control Circuit Open
Quick Answer
The P0685 diagnostic trouble code (DTC) for a 2009 Ford Fusion refers to a problem with the Powertrain Control Module (PCM) Power Relay Control Circuit being open. Common causes include Faulty power relay, Wiring issues or corrosion, Poor connection at the relay. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0685 2009 Ford Fusion indicates Powertrain Control Module Power Relay Control Circuit Open.
- Common causes
- Common causes include Faulty power relay, Wiring issues or corrosion, Poor connection at the relay.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0685 2009 Ford Fusion Description
The P0685 diagnostic trouble code (DTC) for a 2009 Ford Fusion refers to a problem with the Powertrain Control Module (PCM) Power Relay Control Circuit being open. In simpler terms, this means that the PCM is not receiving the proper signal or voltage from the power relay control circuit. The PCM is a crucial component of the vehicle's engine management system, responsible for controlling various functions such as fuel injection, ignition timing, and emissions control.
Common Causes of P0685 2009 Ford Fusion
- Faulty power relay
- Wiring issues or corrosion
- Poor connection at the relay
- PCM failure
- Electrical system issues
Symptoms of P0685 2009 Ford Fusion
- Check Engine Light illuminated
- Engine misfires or runs rough
- Poor fuel efficiency
- Engine stalling or difficulty starting
How to Fix P0685 2009 Ford Fusion
- Diagnose the issue by using a diagnostic scanner to retrieve the trouble codes and testing the power relay control circuit.
- Inspect the power relay for proper operation and replace if necessary.
- Check the wiring and connections for any damage or corrosion, repairing or replacing as needed.
- Clear the DTC and reset the PCM to see if the issue has been resolved.
- Test drive the vehicle to ensure that the problem has been successfully addressed.
Cost to Fix P0685 2009 Ford Fusion
The typical repair costs for addressing a P0685 code on a 2009 Ford Fusion can vary depending on the specific cause of the issue. Generally, replacing a faulty power relay or repairing wiring issues may cost between $100 to $300, including parts and labor. However, if the PCM needs to be replaced, the cost can increase significantly, potentially ranging from $500 to $1000 or more. It's important to factor in diagnostic time and labor rates, which can vary between auto repair shops. It's advisable to check with local shops to get a more precise estimate for this repair.
Tech Notes for P0685 2009 Ford Fusion
Need more information about the P0685 2009 Ford Fusion code?
Need more information on how to fix the P0685 2009 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0685 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0685 2009 Ford Fusion Code
What does OBDII code P0685 mean for a 2009 Ford Fusion?
P0685 indicates an open circuit in the power relay control circuit for the Powertrain Control Module (PCM).
What are the symptoms of code P0685 in a 2009 Ford Fusion?
Common symptoms include engine stalling, failure to start, or intermittent power loss to the PCM.
What causes code P0685 in a 2009 Ford Fusion?
Possible causes include a faulty PCM power relay, damaged wiring or connectors in the control circuit, or a defective PCM.
How can I diagnose code P0685 in my 2009 Ford Fusion?
Start by inspecting the PCM power relay, wiring, and connectors for damage or corrosion. Test relay function and check for circuit continuity.
Can a faulty PCM cause code P0685?
Yes, a defective PCM can cause this code, but it’s less common than issues with the relay or wiring.
Is it safe to drive a 2009 Ford Fusion with code P0685?
Driving may be unsafe as the engine could stall or lose power unexpectedly. Address the issue promptly.
How do I fix code P0685 on a 2009 Ford Fusion?
Repairs may include replacing the PCM power relay, repairing damaged wiring, or replacing the PCM if necessary.
How much does it cost to fix code P0685 in a Ford Fusion?
Costs vary depending on the issue, but replacing a power relay typically costs $50-$100, while PCM replacement can range from $500-$1,500.
Can I clear code P0685 without fixing the problem?
Clearing the code without identifying and fixing the root cause will likely result in the code returning.
Do I need special tools to fix code P0685 on a 2009 Ford Fusion?
Basic tools like a multimeter and OBDII scanner are helpful for diagnostics, but advanced repairs may require professional equipment.
Discuss the causes and fixes for P0685 2009 Ford Fusion OBDII Code
Code P0685 2009 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.