P066E Ford Code - Cylinder 3 Glow Plug Control Circuit Low
Quick Answer
The P066E diagnostic trouble code (DTC) for Ford vehicles specifically refers to an issue with the Cylinder 3 Glow Plug Control Circuit being detected as low. Common causes include Faulty glow plug in Cylinder 3, Damaged or corroded wiring in the glow plug circuit, Malfunctioning glow plug control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P066E Ford indicates Cylinder 3 Glow Plug Control Circuit Low.
- Common causes
- Common causes include Faulty glow plug in Cylinder 3, Damaged or corroded wiring in the glow plug circuit, Malfunctioning glow plug control module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P066E Ford Description
The P066E diagnostic trouble code (DTC) for Ford vehicles specifically refers to an issue with the Cylinder 3 Glow Plug Control Circuit being detected as low. Glow plugs are crucial components in a diesel engine's cold start system, as they heat up the combustion chamber to facilitate ignition in cold weather conditions. In the case of Cylinder 3, this particular glow plug is not receiving the proper amount of power or signal, which can lead to difficulties in starting the engine, reduced performance, and potential long-term damage if left unresolved.
Common Causes of P066E Ford
- Faulty glow plug in Cylinder 3.
- Damaged or corroded wiring in the glow plug circuit.
- Malfunctioning glow plug control module.
- ECM software or hardware issues.
- Poor electrical connections.
Symptoms of P066E Ford
- Difficulty starting the engine, especially in cold weather.
- Rough idling or misfiring.
- Decreased fuel efficiency.
- Illumination of the check engine light.
- Increased emissions.
How to Fix P066E Ford
- Begin by conducting a visual inspection of the glow plug in Cylinder 3 and the surrounding wiring for any visible damage or corrosion.
- Test the glow plug's resistance using a multimeter to determine if it is within the manufacturer's specified range.
- Check the glow plug control module for any signs of damage or malfunction.
- Inspect and test the ECM to ensure it is sending the correct signals to the glow plug control circuit.
- Replace any faulty components, such as the glow plug, wiring, control module, or ECM, as needed.
Cost to Fix P066E Ford
The cost of repairing a Cylinder 3 Glow Plug Control Circuit Low issue can vary depending on the specific cause of the problem and the labor rates in your area. Generally, replacing a single glow plug can cost between $50 and $150, while a control module or ECM replacement can range from $200 to $500 or more. Labor costs can add an additional $80 to $150 per hour, with the total repair bill potentially exceeding $500 in some cases. It's recommended to obtain quotes from local auto repair shops to get a more accurate estimate based on your vehicle's make and model.
Need more information about the P066E Ford code?
Need more information on how to fix the P066E Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P066E Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P066E Ford Code
1. What does the OBDII code P066E mean on a Ford vehicle?
P066E indicates a problem with the Cylinder 3 Glow Plug Control Circuit, specifically that the voltage is lower than expected.
2. What are the common symptoms of code P066E?
Symptoms may include difficulty starting the engine in cold weather, rough idling, reduced engine performance, and an illuminated check engine light.
3. What causes the P066E code to appear on a Ford vehicle?
Common causes include a faulty glow plug, damaged wiring or connectors, a malfunctioning glow plug control module, or issues with the engine control module (ECM).
4. Can I still drive my Ford with the P066E code active?
While the vehicle may still be drivable, ignoring the code can lead to poor cold-start performance and potential engine damage over time.
5. How do I diagnose the P066E code?
Start by inspecting the glow plug, wiring, and connectors for damage or corrosion, and use a multimeter to test the voltage in the circuit. A diagnostic scan tool can also help verify the issue.
6. How do I fix the P066E code on my Ford vehicle?
Common fixes include replacing the faulty glow plug, repairing or replacing damaged wiring or connectors, or replacing the glow plug control module if necessary.
7. How much does it cost to repair a P066E code?
The cost can vary, but replacing a single glow plug typically costs $50–$150, while more extensive repairs like module replacement can range from $200–$500, depending on labor rates.
8. Can a bad glow plug cause other engine issues?
Yes, a bad glow plug can lead to poor engine performance, increased emissions, and difficulty starting in cold temperatures.
9. Do I need special tools to fix the P066E code?
You may need a multimeter, an OBDII scan tool, and basic hand tools to diagnose and repair the issue.
10. What should I do if the P066E code keeps coming back after repairs?
If the code persists, double-check all repairs, inspect for hidden wiring issues, and consider having the ECM reprogrammed or further diagnosed by a professional.
Discuss the causes and fixes for P066E Ford OBDII Code
Code P066E Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.