P066C 2014 Chevrolet Silverado Code - Cylinder 2 Glow Plug Control Circuit Low Voltage
Quick Answer
The diagnostic trouble code P066C for a 2014 Chevrolet Silverado indicates an issue with the Cylinder 2 Glow Plug Control Circuit experiencing low voltage. Common causes include Faulty glow plug in Cylinder 2, Wiring issues or a poor connection in the glow plug control circuit, Faulty glow plug control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P066C 2014 Chevrolet Silverado indicates Cylinder 2 Glow Plug Control Circuit Low Voltage.
- Common causes
- Common causes include Faulty glow plug in Cylinder 2, Wiring issues or a poor connection in the glow plug control circuit, Faulty glow plug control module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P066C 2014 Chevrolet Silverado Description
The diagnostic trouble code P066C for a 2014 Chevrolet Silverado indicates an issue with the Cylinder 2 Glow Plug Control Circuit experiencing low voltage. Glow plugs are essential for diesel engines to start in cold weather by preheating the combustion chamber. When the control circuit for the glow plug in Cylinder 2 is not receiving sufficient voltage, it can lead to difficulties starting the engine, reduced fuel efficiency, and potentially engine misfires. This issue can impact the overall performance of the vehicle, causing rough idling, decreased power output, and possible emissions problems.
Common Causes of P066C 2014 Chevrolet Silverado
- Faulty glow plug in Cylinder 2.
- Wiring issues or a poor connection in the glow plug control circuit.
- Faulty glow plug control module.
- Issues with the engine control module (ECM) or related sensors.
- Electrical system problems such as a blown fuse or relay.
Symptoms of P066C 2014 Chevrolet Silverado
- Difficulty starting the engine, especially in cold weather.
- Rough idling or engine misfires.
- Decreased fuel efficiency.
- Illumination of the check engine light on the dashboard.
- Reduced power output when accelerating.
How to Fix P066C 2014 Chevrolet Silverado
- Begin by inspecting the glow plug in Cylinder 2 and the wiring connections for any visible damage or corrosion.
- Test the glow plug control module and related components for proper functioning using a multimeter.
- If necessary, replace the faulty glow plug, control module, or any damaged wiring.
- Clear the diagnostic trouble codes from the ECM using a scan tool.
- Perform a test drive to ensure that the issue has been resolved and that the engine starts smoothly.
Cost to Fix P066C 2014 Chevrolet Silverado
The typical repair costs for addressing a Cylinder 2 Glow Plug Control Circuit Low Voltage issue in a 2014 Chevrolet Silverado can range from $150 to $400. This estimate includes the cost of a new glow plug, control module, or wiring repair, as well as labor charges. However, it's important to note that actual repair costs can vary based on the specific parts needed, the shop's hourly labor rate, and any additional diagnostics required. It's recommended to consult with a trusted mechanic or service center for a more accurate cost estimate based on your vehicle's condition and location.
Need more information about the P066C 2014 Chevrolet Silverado code?
Need more information on how to fix the P066C 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P066C 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P066C 2014 Chevrolet Silverado Code
What does the OBDII code P066C mean for a 2014 Chevrolet Silverado?
Code P066C indicates a low voltage issue in the glow plug control circuit for cylinder 2.
What are common symptoms of code P066C in a 2014 Chevrolet Silverado?
Symptoms may include difficulty starting the engine, rough idling, reduced fuel efficiency, or an illuminated check engine light.
What causes the P066C code in a 2014 Chevrolet Silverado?
Common causes include a faulty glow plug, damaged wiring or connectors in the glow plug circuit, or a malfunctioning glow plug control module.
Can driving with code P066C damage the engine?
While driving may be possible, prolonged operation with this issue can cause increased wear on the engine and impact cold weather performance.
How can I diagnose the P066C code in my Silverado?
Inspect the glow plug for cylinder 2, check wiring and connectors for damage, and test the glow plug control module with a multimeter.
How do I fix the P066C code on a 2014 Chevrolet Silverado?
Repairs may include replacing the faulty glow plug, repairing damaged wiring, or replacing the glow plug control module if necessary.
What tools are needed to troubleshoot the P066C code?
Basic tools include a multimeter for voltage testing and an OBDII scanner to verify and clear the code.
Is the P066C code specific to cold weather operation?
Yes, glow plugs are essential for starting diesel engines in cold weather, and this code is often more noticeable in colder conditions.
How much does it cost to repair code P066C on a 2014 Chevrolet Silverado?
Repair costs can range from $100 to $300, depending on whether the glow plug or control module needs replacement.
Can a faulty glow plug cause other issues beyond the P066C code?
Yes, a faulty glow plug can lead to hard starts, rough engine operation, and increased emissions.
Discuss the causes and fixes for P066C 2014 Chevrolet Silverado OBDII Code
Code P066C 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.