Engine-Codes.com
Engine-Codes – Honda – P0662 2006 Honda CR-V

P0662 2006 Honda CR-V Code - Intake Manifold Runner Control Valve Position Sensor Circuit High Voltage

Quick Answer

The P0662 diagnostic trouble code (DTC) for a 2006 Honda CR-V refers to the Intake Manifold Runner Control Valve Position Sensor Circuit High Voltage. Common causes include Faulty wiring or connectors in the circuit, Malfunctioning intake manifold runner control valve, Defective position sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0662 2006 Honda CR-V indicates Intake Manifold Runner Control Valve Position Sensor Circuit High Voltage.
Common causes
Common causes include Faulty wiring or connectors in the circuit, Malfunctioning intake manifold runner control valve, Defective position sensor.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 17, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0662 2006 Honda CR-V Description

The P0662 diagnostic trouble code (DTC) for a 2006 Honda CR-V refers to the Intake Manifold Runner Control Valve Position Sensor Circuit High Voltage. This code indicates that there is a high voltage condition detected in the circuit that controls the position sensor for the intake manifold runner control valve. The intake manifold runner control valve is responsible for adjusting the length of the intake manifold runners to optimize air flow into the engine based on driving conditions. The position sensor provides feedback to the engine control module (ECM) to ensure that the valve is in the correct position.

OBDII Code P0662 2006 Honda CR-V - Intake Manifold Runner Control Valve Position Sensor Circuit High Voltage
P0662 2006 Honda CR-V Code - Intake Manifold Runner Control Valve Position Sensor Circuit High Voltage

Common Causes of P0662 2006 Honda CR-V

  1. Faulty wiring or connectors in the circuit
  2. Malfunctioning intake manifold runner control valve
  3. Defective position sensor
  4. ECM malfunction
  5. Corrosion or damage to components

Symptoms of P0662 2006 Honda CR-V

  1. Reduced fuel efficiency
  2. Loss of power
  3. Rough idling
  4. Engine stalling
  5. Check Engine Light illuminated

How to Fix P0662 2006 Honda CR-V

  1. Begin by conducting a thorough inspection of the wiring and connectors in the circuit to check for any damage or corrosion. Repair or replace any faulty components.
  2. Test the intake manifold runner control valve and position sensor using a multimeter to determine if they are functioning correctly. Replace any components that are found to be defective.
  3. Clear the DTC from the ECM using an OBD-II scanner and monitor the system to ensure that the code does not return.
  4. If the issue persists, further diagnostics may be required to pinpoint the exact cause, such as testing the ECM for faults or performing a smoke test to check for vacuum leaks.
  5. Once the root cause is identified, perform the necessary repairs or replacements to resolve the high voltage condition in the circuit.

Cost to Fix P0662 2006 Honda CR-V

The typical repair costs for addressing a P0662 code on a 2006 Honda CR-V can vary depending on the specific cause of the issue. In general, the cost of parts such as a new intake manifold runner control valve, position sensor, or wiring harness can range from $100 to $300. Labor costs at an auto repair shop can add an additional $100 to $300, with total repair costs typically falling between $200 and $600. It's important to note that diagnosis time and labor rates can vary based on factors such as location, vehicle make and model, and the expertise of the technician. It's recommended to obtain quotes from local auto repair shops to get a more accurate estimate for this repair.

What does this mean?

Tech Notes for P0662 2006 Honda CR-V

Intake Manifold Runner Control might need to be cleaned or replaced. Intake Manifold Runner Control might be sold separately or with the intake manifold call a local dealer to find out.

When is the Code Detected?

If the output voltage from the Intake Manifold Runner Control (IMRC) valve position sensor is higher than a set value, a malfunction is detected and the P0662 code will set.

Need more information about the P0662 2006 Honda CR-V code?

Need more information on how to fix the P0662 2006 Honda CR-V code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0662 2006 Honda CR-V code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0662 2006 Honda CR-V Code

1. What does the OBDII code P0662 indicate on a 2006 Honda CR-V?

The code P0662 indicates that there is a high voltage error in the Intake Manifold Runner Control Valve Position Sensor Circuit, suggesting a malfunction that affects the engine's air intake system.

2. What are common symptoms of the P0662 code in a 2006 Honda CR-V?

Common symptoms include engine performance issues like hesitation, rough idling, and stalling, a decrease in fuel efficiency, and the Check Engine Light being illuminated.

3. What causes the P0662 code to appear in a 2006 Honda CR-V?

Potential causes include a faulty Intake Manifold Runner Control (IMRC) valve, damaged wiring or connectors in the IMRC circuit, or a problem with the engine control module (ECM).

4. How can I repair the P0662 code in my 2006 Honda CR-V?

Repairs can vary but may include replacing the Intake Manifold Runner Control valve, repairing or replacing damaged wiring or connectors, and in some cases, replacing or reprogramming the ECM.

5. Is it safe to drive my 2006 Honda CR-V with the P0662 code?

While you can drive with this code, it's not recommended as the engine might perform unpredictably, and prolonged driving with this issue can lead to further damage.

6. What tools are needed to diagnose the P0662 code in a 2006 Honda CR-V?

Diagnosis typically requires an OBDII scanner to read the code and a multimeter to check the voltages in the IMRC circuit. Visual inspection for damaged components is also crucial.

7. How does a technician confirm the cause of the P0662 code on a 2006 Honda CR-V?

A technician will start by reading the code with an OBDII scanner, inspecting the IMRC valve and associated wiring, and testing circuit continuity and voltage levels with a multimeter to pinpoint the issue.

8. Can a faulty battery or alternator cause the P0662 code in a 2006 Honda CR-V?

While unlikely, electrical system malfunctions like a faulty alternator or battery can impact overall vehicle voltage and potentially contribute to this error code. However, they are not common causes.

9. What is the cost of fixing the P0662 code in a 2006 Honda CR-V?

The cost can vary widely based on the exact cause. For example, replacing the IMRC valve can cost anywhere from $200 to $400, while more extensive electrical repairs or ECM replacement can significantly increase the cost.

10. How urgent is it to address the P0662 code in a 2006 Honda CR-V?

It is moderately urgent to address this issue to avoid potential engine damage and to restore proper vehicle performance and fuel efficiency.

Discuss the causes and fixes for P0662 2006 Honda CR-V OBDII Code

Submit a New Comment

Code P0662 2006 Honda CR-V comments

No comments found for this page.