Engine-Codes
 
OBDII Code List
 
P0662 2004 HONDA CRV

P0662 2004 HONDA CRV - Intake Manifold Runner Control Valve Position Sensor Circuit High Voltage

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3  What does this mean?

P0662 2004 HONDA CRV Possible Causes

  • Faulty Intake Manifold Runner Control (IMRC) Sensor
  • Intake Manifold Runner Control harness is open or shorted
  • Intake Manifold Runner Control circuit poor electrical connection

P0662 2004 HONDA CRV Tech Notes

Intake Manifold Runner Control might need to be cleaned or replaced. Intake Manifold Runner Control might be sold separately or with the intake manifold call a local dealer to find out.

Cost of diagnosing the P0662 2004 HONDA CRV code

    Labor: 1.0

    The cost of diagnosing the P0662 2004 HONDA CRV code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

When is the P0662 2004 HONDA CRV code detected?

If the output voltage from the Intake Manifold Runner Control (IMRC) valve position sensor is higher than a set value, a malfunction is detected and the P0662 code will set.

P0662 2004 HONDA CRV Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P0662 2004 HONDA CRV Meaning

Engine power is achieved by closing and opening the Intake Manifold Runner Control (IMRC) valve. When the valve is closed, there is high torque at low engine speed. When the valve is open, there is high torque a high engine speed.

The Intake Manifold Runner Control (IMRC) valve position sensor is mounted on the IMRC valve shaft and detects an IMRC valve position. The IMRC valve position sensor includes the brush that moves with the IMRC valve, and it has a linear signal output in relation to the IMRC valve position when sliding on the board. The Engine Control Module (ECM) monitors the IMRC valve position sensor voltage which represents the IMRC valve position. If the output voltage from the IMRC valve position sensor is higher than a set value, a malfunction is detected and a DTC is stored.

OBDII Code P0662 2004 HONDA CRV - Intake Manifold Runner Control Valve Position Sensor Circuit High Voltage - Engine-Codes.com

Related Information