Engine-Codes.com
Engine-Codes – Honda – P0662 2002 Honda CR-V

P0662 2002 Honda CR-V Code - Intake Manifold Runner Control Valve Position Sensor Circuit High Voltage

Quick Answer

The P0662 diagnostic trouble code (DTC) for a 2002 Honda CR-V refers to the Intake Manifold Runner Control Valve Position Sensor Circuit High Voltage. Common causes include Faulty Intake Manifold Runner Control Valve: A malfunctioning intake manifold runner control valve can cause high voltage in the position sensor circuit, Wiring Issues: Damaged or corroded wiring in the circuit can lead to a high voltage condition, Poor Electrical Connection: Loose or poor electrical connections can disrupt the voltage in the circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0662 2002 Honda CR-V indicates Intake Manifold Runner Control Valve Position Sensor Circuit High Voltage.
Common causes
Common causes include Faulty Intake Manifold Runner Control Valve: A malfunctioning intake manifold runner control valve can cause high voltage in the position sensor circuit, Wiring Issues: Damaged or corroded wiring in the circuit can lead to a high voltage condition, Poor Electrical Connection: Loose or poor electrical connections can disrupt the voltage in the circuit.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 13, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0662 2002 Honda CR-V Description

The P0662 diagnostic trouble code (DTC) for a 2002 Honda CR-V refers to the Intake Manifold Runner Control Valve Position Sensor Circuit High Voltage. This code indicates that there is a high voltage condition detected in the circuit that controls the position sensor for the intake manifold runner control valve. The intake manifold runner control valve is responsible for adjusting the length of the intake manifold runners to optimize airflow into the engine based on driving conditions.

OBDII Code P0662 2002 Honda CR-V - Intake Manifold Runner Control Valve Position Sensor Circuit High Voltage
P0662 2002 Honda CR-V Code - Intake Manifold Runner Control Valve Position Sensor Circuit High Voltage

Common Causes of P0662 2002 Honda CR-V

  1. Faulty Intake Manifold Runner Control Valve: A malfunctioning intake manifold runner control valve can cause high voltage in the position sensor circuit.
  2. Wiring Issues: Damaged or corroded wiring in the circuit can lead to a high voltage condition.
  3. Poor Electrical Connection: Loose or poor electrical connections can disrupt the voltage in the circuit.
  4. ECM Malfunction: A problem with the engine control module (ECM) can also trigger the P0662 code.
  5. Sensor Failure: A defective intake manifold runner control valve position sensor can cause high voltage readings in the circuit.

Symptoms of P0662 2002 Honda CR-V

  1. Check Engine Light: The most common symptom associated with the P0662 code is the illumination of the check engine light on the vehicle's dashboard.
  2. Reduced Engine Performance: The engine may experience a decrease in power and responsiveness, especially during acceleration.
  3. Rough Idling: The vehicle may idle roughly or inconsistently, with fluctuations in engine speed.
  4. Poor Fuel Efficiency: The vehicle may consume more fuel than usual due to the improper adjustment of the intake manifold runners.
  5. Emissions Issues: The vehicle may fail emissions tests due to the incorrect air-fuel mixture caused by the high voltage condition in the intake manifold runner control valve position sensor circuit.

How to Fix P0662 2002 Honda CR-V

  1. Diagnose the Issue: Use a scan tool to retrieve the DTC and perform a thorough inspection of the intake manifold runner control valve, sensor, and related wiring.
  2. Replace Intake Manifold Runner Control Valve: If the valve is faulty, replace it with a new one following manufacturer guidelines.
  3. Repair Wiring or Connections: Repair any damaged wiring or connections in the circuit to ensure proper voltage flow.
  4. Replace Sensor: If the position sensor is defective, replace it with a new sensor compatible with the vehicle.
  5. Clear DTCs and Test Drive: Clear the DTCs from the ECM, test drive the vehicle to ensure the issue is resolved, and verify that the check engine light does not reappear.

Cost to Fix P0662 2002 Honda CR-V

The typical repair costs for addressing the P0662 code on a 2002 Honda CR-V can range from $200 to $500, including parts and labor. However, it is essential to note that specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Most auto repair shops charge between $80 and $150 per hour for labor, but rates may be higher in metropolitan areas or at dealerships, while independent shops may offer lower rates. It is advisable to inquire about local rates to obtain a more accurate estimate for the repair.

What does this mean?

Tech Notes for P0662 2002 Honda CR-V

Intake Manifold Runner Control might need to be cleaned or replaced. Intake Manifold Runner Control might be sold separately or with the intake manifold call a local dealer to find out.

When is the Code Detected?

If the output voltage from the Intake Manifold Runner Control (IMRC) valve position sensor is higher than a set value, a malfunction is detected and the P0662 code will set.

Need more information about the P0662 2002 Honda CR-V code?

Need more information on how to fix the P0662 2002 Honda CR-V code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0662 2002 Honda CR-V code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0662 2002 Honda CR-V Code

1. What are the common symptoms of OBDII code P0662 on a 2002 Honda CR-V?

- Common symptoms include poor engine performance, rough idling, decreased fuel efficiency, and the illumination of the check engine light.

2. What does the OBDII code P0662 indicate in a 2002 Honda CR-V?

- The code P0662 indicates a high voltage condition in the circuit of the Intake Manifold Runner Control Valve Position Sensor on a 2002 Honda CR-V.

3. What are the possible causes of OBDII code P0662 on a 2002 Honda CR-V?

- Possible causes include a faulty Intake Manifold Runner Control Valve Position Sensor, damaged wiring or connectors, a malfunctioning intake manifold runner control valve, or a problem with the engine control module.

4. How can I diagnose the issue causing OBDII code P0662 on my 2002 Honda CR-V?

- A thorough diagnosis involving checking the sensor, wiring, connectors, and control valve using a multimeter, visual inspection, and possibly a scan tool is recommended to pinpoint the exact cause.

5. Can I drive my 2002 Honda CR-V with OBDII code P0662?

- It is not recommended to drive the vehicle with this code present, as it can lead to further damage and potentially unsafe driving conditions. It is best to address the issue promptly.

6. How can I repair OBDII code P0662 on my 2002 Honda CR-V?

- Repair options may include replacing the Intake Manifold Runner Control Valve Position Sensor, repairing or replacing damaged wiring or connectors, fixing issues with the intake manifold runner control valve, or reprogramming the engine control module.

7. Are there any DIY tips for fixing OBDII code P0662 on a 2002 Honda CR-V?

- DIY tips may include checking for loose or damaged connections, cleaning connectors, and carefully inspecting wiring for any visible damage before proceeding with more advanced repairs.

8. How much does it typically cost to repair OBDII code P0662 on a 2002 Honda CR-V?

- The cost of repairs can vary depending on the exact cause of the issue, the parts needed, and whether you choose to do the repairs yourself or take your vehicle to a professional mechanic. Costs can range from a few hundred to over a thousand dollars.

9. Can resetting the OBDII code P0662 on a 2002 Honda CR-V fix the issue temporarily?

- Resetting the code may temporarily turn off the check engine light, but it will not fix the underlying issue causing the code. It is essential to diagnose and address the root cause of the problem to prevent further issues.

10. Is it possible for OBDII code P0662 to reappear after repairs on a 2002 Honda CR-V?

- If the root cause of the issue is not properly addressed during repairs, there is a possibility that the code may reappear. It is crucial to diagnose the problem accurately and ensure all necessary repairs are completed to prevent recurrence.

Discuss the causes and fixes for P0662 2002 Honda CR-V OBDII Code

Submit a New Comment

Code P0662 2002 Honda CR-V comments

No comments found for this page.