P0660 1998 Ford F150 Code - Intake Manifold Tuning Valve circuit Malfunction
Quick Answer
The P0660 diagnostic trouble code (DTC) for a 1998 Ford F150 indicates a malfunction in the intake manifold tuning valve circuit. Common causes include Wiring issues in the intake manifold tuning valve circuit, Faulty valve actuator, Malfunctioning intake manifold tuning valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0660 1998 Ford F150 indicates Intake Manifold Tuning Valve circuit Malfunction.
- Common causes
- Common causes include Wiring issues in the intake manifold tuning valve circuit, Faulty valve actuator, Malfunctioning intake manifold tuning valve.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0660 1998 Ford F150 Description
The P0660 diagnostic trouble code (DTC) for a 1998 Ford F150 indicates a malfunction in the intake manifold tuning valve circuit. The intake manifold tuning valve is responsible for controlling the airflow within the intake manifold, optimizing performance and efficiency based on engine speed and load. When this circuit malfunctions, it can lead to a variety of issues that affect the vehicle's performance.
Common Causes of P0660 1998 Ford F150
- Wiring issues in the intake manifold tuning valve circuit
- Faulty valve actuator
- Malfunctioning intake manifold tuning valve
- Corrosion or damage to electrical connectors
- Engine control module (ECM) failure
Symptoms of P0660 1998 Ford F150
- Rough idling
- Hesitation during acceleration
- Decreased power
- Poor fuel efficiency
- Engine stalling
How to Fix P0660 1998 Ford F150
- Begin by conducting a thorough inspection of the intake manifold tuning valve circuit, checking for any visible damage or loose connections.
- Test the intake manifold tuning valve actuator and valve to determine if they are functioning properly.
- Use a multimeter to check for continuity and proper voltage in the circuit, identifying any potential wiring issues.
- Replace any damaged components, such as the valve actuator or intake manifold tuning valve, if necessary.
- Clear the DTC and perform a test drive to ensure the issue has been resolved.
Cost to Fix P0660 1998 Ford F150
The typical repair costs for addressing a P0660 code on a 1998 Ford F150 can vary depending on the specific cause of the issue and the cost of replacement parts. On average, the repair for this issue may range from $200 to $500, including parts and labor. It's important to note that diagnosis time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate based on your location and vehicle specifics.
Tech Notes for P0660 1998 Ford F150
When is the Code Detected?
Need more information about the P0660 1998 Ford F150 code?
Need more information on how to fix the P0660 1998 Ford F150 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0660 1998 Ford F150 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0660 1998 Ford F150 Code
1. What does the OBDII code P0660 mean on a 1998 Ford F150?
P0660 indicates a malfunction in the Intake Manifold Tuning Valve (IMTV) circuit, which controls airflow through the intake manifold to optimize engine performance.
2. What are the symptoms of code P0660 on a 1998 Ford F150?
Common symptoms include reduced engine performance, poor fuel economy, lack of power at higher RPMs, and an illuminated check engine light.
3. What causes the P0660 code on a 1998 Ford F150?
Potential causes include a faulty Intake Manifold Tuning Valve, a damaged IMTV solenoid, wiring issues (such as frayed or corroded wires), or a malfunctioning PCM (Powertrain Control Module).
4. Can I drive my 1998 Ford F150 with a P0660 code?
While the truck may still run, driving with a P0660 code can lead to reduced performance and efficiency. It’s best to address the issue promptly to avoid further complications.
5. How can I diagnose code P0660 on a 1998 Ford F150?
Start by inspecting the wiring and connectors for the Intake Manifold Tuning Valve. Then test the IMTV solenoid for proper resistance using a multimeter and check for voltage at the connector.
6. How do I fix the P0660 code on my 1998 Ford F150?
Repairs may include replacing the Intake Manifold Tuning Valve, repairing damaged wiring, cleaning corroded connectors, or, in rare cases, replacing the PCM.
7. What tools do I need to diagnose and fix the P0660 code?
You’ll need a scan tool, a digital multimeter, wiring diagrams for your 1998 Ford F150, and basic hand tools for repairs.
8. How much does it cost to repair a P0660 code on a 1998 Ford F150?
Costs vary but typically range between $100 and $300 for parts and labor, depending on whether the issue is with the IMTV itself, wiring, or other components.
9. Can a dirty intake manifold cause a P0660 code?
A dirty intake manifold is not a direct cause of P0660, but carbon buildup can potentially affect the movement of the Intake Manifold Tuning Valve, leading to related issues.
10. Does clearing the code fix the P0660 issue on a 1998 Ford F150?
Clearing the code will turn off the check engine light temporarily, but it won’t fix the underlying problem. Proper diagnosis and repair are necessary to resolve the issue.
Discuss the causes and fixes for P0660 1998 Ford F150 OBDII Code
Code P0660 1998 Ford F150 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.