P0659 2018 GMC Sierra Code - Actuator High Control Circuit Group 1 High Voltage
Quick Answer
The diagnostic trouble code P0659 in a 2018 GMC Sierra indicates an issue with the Actuator High Control Circuit Group 1 High Voltage. Common causes include Faulty Actuator: A malfunctioning actuator can cause high voltage in the control circuit, triggering this code, Wiring Issues: Damaged or corroded wiring in the actuator control circuit can lead to high voltage readings, ECM Malfunction: A malfunctioning Engine Control Module (ECM) can incorrectly detect high voltage in the circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0659 2018 GMC Sierra indicates Actuator High Control Circuit Group 1 High Voltage.
- Common causes
- Common causes include Faulty Actuator: A malfunctioning actuator can cause high voltage in the control circuit, triggering this code, Wiring Issues: Damaged or corroded wiring in the actuator control circuit can lead to high voltage readings, ECM Malfunction: A malfunctioning Engine Control Module (ECM) can incorrectly detect high voltage in the circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0659 2018 GMC Sierra Description
The diagnostic trouble code P0659 in a 2018 GMC Sierra indicates an issue with the Actuator High Control Circuit Group 1 High Voltage. This code is specifically related to the actuator control circuit, which is responsible for controlling various actuators in the vehicle, such as the throttle, EGR valve, or other components. The high voltage detected in this circuit can lead to improper actuator operation, potentially causing drivability issues, reduced fuel efficiency, and even engine performance problems.
Common Causes of P0659 2018 GMC Sierra
- Faulty Actuator: A malfunctioning actuator can cause high voltage in the control circuit, triggering this code.
- Wiring Issues: Damaged or corroded wiring in the actuator control circuit can lead to high voltage readings.
- ECM Malfunction: A malfunctioning Engine Control Module (ECM) can incorrectly detect high voltage in the circuit.
- Poor Connection: Loose or poor connections in the actuator control circuit can cause voltage irregularities.
Symptoms of P0659 2018 GMC Sierra
- Check Engine Light: The most common symptom associated with this code is the illumination of the Check Engine Light on the dashboard.
- Reduced Engine Performance: The vehicle may experience a decrease in engine performance, such as reduced power or acceleration.
- Rough Idling: The engine may idle roughly or inconsistently, leading to a shaky or unstable driving experience.
- Poor Fuel Efficiency: High voltage in the actuator control circuit can impact fuel delivery, resulting in decreased fuel efficiency.
- Stalling: In severe cases, the vehicle may stall or have difficulty starting due to the actuator control circuit issue.
How to Fix P0659 2018 GMC Sierra
- Diagnose the Issue: Use a diagnostic scanner to retrieve the trouble code and pinpoint the exact cause of the high voltage in the actuator control circuit.
- Inspect Wiring: Check the wiring in the actuator control circuit for any damage, corrosion, or loose connections. Repair or replace as needed.
- Test Actuator: Test the actuator to ensure it is functioning properly. Replace if necessary.
- Check ECM: Inspect the Engine Control Module (ECM) for any signs of malfunction. Repair or replace as needed.
- Clear Codes: After completing the repairs, clear the diagnostic trouble codes from the ECM to reset the system and ensure the issue has been resolved.
Cost to Fix P0659 2018 GMC Sierra
The typical repair costs for addressing the P0659 code in a 2018 GMC Sierra can vary depending on the specific cause of the issue. On average, the parts and labor for this repair may range from $200 to $500. However, it's important to note that diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Rates typically range between $80 and $150 per hour, with rates potentially higher at dealerships or metropolitan areas and lower at independent shops. For a more accurate estimate, it's recommended to inquire with local auto repair shops.
Need more information about the P0659 2018 GMC Sierra code?
Need more information on how to fix the P0659 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0659 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0659 2018 GMC Sierra Code
No Frequently Asked Questions about P0659 2018 GMC Sierra Code found.
Discuss the causes and fixes for P0659 2018 GMC Sierra OBDII Code
Code P0659 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.