P0652 Code - 5 Volt Sensor Reference 2 Circuit Low
Quick Answer
The P0652 diagnostic trouble code indicates that the 5-volt sensor reference 2 circuit is reading a lower voltage than expected. Common causes include Faulty sensor requiring the 5-volt reference signal, Wiring or connection issues in the sensor circuit, Corrosion or damage to the sensor connector. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0652 indicates 5 Volt Sensor Reference 2 Circuit Low.
- Common causes
- Common causes include Faulty sensor requiring the 5-volt reference signal, Wiring or connection issues in the sensor circuit, Corrosion or damage to the sensor connector.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0652 Description
The P0652 diagnostic trouble code indicates that the 5-volt sensor reference 2 circuit is reading a lower voltage than expected. This signal is crucial for various sensors and components within the vehicle's engine management system to operate correctly. When the voltage is too low, it can lead to incorrect sensor readings and potentially cause drivability issues. The Engine Control Module (ECM) uses the 5-volt reference signal to power sensors such as the throttle position sensor, manifold absolute pressure sensor, and fuel pressure sensor. If this reference voltage drops below the specified range, it can result in poor engine performance, decreased fuel efficiency, and even stalling.
Common Causes of P0652
- Faulty sensor requiring the 5-volt reference signal
- Wiring or connection issues in the sensor circuit
- Corrosion or damage to the sensor connector
- ECM malfunction
- Short circuit in the sensor reference circuit
Symptoms of P0652
- Check Engine Light illuminated on the dashboard
- Reduced engine power or hesitation during acceleration
- Rough idling or stalling
- Inaccurate or erratic sensor readings
- Difficulty starting the vehicle
How to Fix P0652
- Begin by using a scan tool to read the code and identify the specific sensor causing the issue.
- Inspect the sensor and its wiring harness for any visible damage, corrosion, or loose connections.
- Test the 5-volt reference signal using a multimeter to determine if it falls within the acceptable range.
- Replace the faulty sensor if necessary, ensuring the new sensor is properly calibrated and connected.
- Clear the diagnostic trouble codes from the ECM and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0652
The cost of repairing a P0652 code can vary depending on the specific cause of the issue and the labor rates in your area. On average, you can expect to pay anywhere from $100 to $300 for parts and labor. Keep in mind that additional diagnostic time may be required to pinpoint the exact cause of the problem, so it's advisable to consult with a professional mechanic for a more accurate estimate. Labor rates typically range from $80 to $150 per hour, with rates potentially higher at dealerships or in urban areas.
When is the Code Detected?
Need more information about the P0652 code?
Need more information on how to fix the P0652 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0652 code diagnosed by a professional: Find a repair shop in your area
Code P0652 Information for Specific Makes
- P0652 Audi — Sensor Reference Voltage 'B' Circuit Low
- P0652 Buick — 5 Volt Reference 2 Circuit Low Voltage
- P0652 Cadillac — 5 Volt Reference 2 Circuit Low Voltage
- P0652 Chevrolet — 5 Volt Reference 2 Circuit Low Voltage
- P0652 Chrysler — 5 Volt Sensor Reference 2 Circuit Low
- P0652 Dodge — 5 Volt Sensor Reference 2 Circuit Low
- P0652 GMC — 5 Volt Reference 2 Circuit Low Voltage
- P0652 Hyundai — Sensor Reference Voltage 'B' Circuit Low
- P0652 Isuzu — 5 Volt Reference 2 Circuit Low Voltage
- P0652 Jeep — 5 Volt Sensor Reference 2 Circuit Low
- P0652 KIA — Sensor Reference Voltage 'B' Circuit Low
- P0652 Mitsubishi — Sensor Reference Voltage 'B' Circuit Low
- P0652 Suzuki — 5 Volt Reference 2 Circuit Low Voltage
- P0652 Volkswagen — Sensor Reference Voltage 'B' Circuit Low
Frequently Asked Questions about P0652 Code
1. What does OBDII code P0652 mean?
Code P0652 stands for "5 Volt Sensor Reference 2 Circuit Low." It indicates that the voltage on the sensor reference 2 circuit is lower than the specified range.
2. What are the common symptoms of OBDII code P0652?
Common symptoms of code P0652 may include check engine light illumination, poor engine performance, rough idling, and potential stalling of the vehicle.
3. What are the possible causes of OBDII code P0652?
Possible causes of code P0652 include a faulty sensor, damaged wiring or connectors in the sensor reference 2 circuit, a defective Engine Control Module (ECM), or an electrical issue.
4. How can I diagnose the OBDII code P0652?
Diagnosing code P0652 involves using a diagnostic scanner to read the code, checking the sensor reference 2 circuit for continuity and voltage, inspecting the wiring and connectors for damage, and testing the sensor itself.
5. Can I still drive my vehicle with OBDII code P0652 present?
It is not recommended to drive your vehicle with code P0652 present, as it can lead to further damage and potential safety hazards. It is best to address the underlying issue promptly.
6. How can I repair OBDII code P0652?
Repairing code P0652 may involve replacing the faulty sensor, repairing or replacing damaged wiring or connectors, resetting the ECM, or seeking professional assistance for a thorough diagnosis and repair.
7. Is it safe to ignore OBDII code P0652?
Ignoring code P0652 can lead to poor engine performance, potential stalling, and other issues that may compromise the safety and reliability of your vehicle. It is advisable to address the code promptly.
8. Can a DIY enthusiast fix OBDII code P0652?
Depending on your skill level and access to tools, a DIY enthusiast may be able to diagnose and repair code P0652. However, if you are unsure or unfamiliar with automotive repairs, it is best to seek professional help.
9. How much does it cost to fix OBDII code P0652?
The cost of fixing code P0652 can vary depending on the specific cause of the issue, the necessary repairs, and whether you choose to do the repairs yourself or seek professional assistance. Costs may include parts and labor.
10. How can I prevent OBDII code P0652 from recurring?
To prevent code P0652 from recurring, it is essential to address the underlying issue properly, perform regular maintenance on your vehicle, avoid electrical shorts, and ensure all components are in good working condition.
Discuss the causes and fixes for P0652 OBDII Code
Code P0652 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.