OBDII Code List

P0651 LAND-ROVER - Sensor Reference Voltage 'B' Circuit/Open

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3  What does this mean?

P0651 LAND-ROVER Possible Causes

  • Faulty Engine Control Module (ECM)
  • ECM harness is open or shorted
  • ECM circuit poor electrical connection
  • Shorted sensor on 5 volt circuit

First diagnose P0651 LAND-ROVER code

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.

Cost of diagnosing the P0651 LAND-ROVER code

    Labor: 1.0

    The cost of diagnosing the P0651 LAND-ROVER code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

When is the P0651 LAND-ROVER code detected?

The Engine Control Module (ECM) has detected the sensor 5 volt reference circuit voltage is higher or lower than expected

P0651 LAND-ROVER Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P0651 LAND-ROVER Meaning

The control module has 2 internal 5-volt reference buses called "5-volt reference 1" and"5-volt reference 2". Each reference bus provided 5-volt reference circuit for more than one sensor. Therefore, a fault condition on one 5-volt reference circuit will affect the other 5-volt reference circuits connected to the reference bus. The control module monitors the voltage on the 5-volt reference buses.
OBDII Code P0651 LAND-ROVER - Sensor Reference Voltage 'B' Circuit/Open - Engine-Codes.com

P0651 LAND-ROVER More Information

Need more information on how to fix the P0651 LAND-ROVER code?
Get Access to Factory Service Manuals

Related Information