P064F 2018 GMC Sierra Code - Unauthorized Software/Calibration Detected
Quick Answer
The P064F diagnostic trouble code (DTC) in a 2018 GMC Sierra indicates that the engine control module (ECM) has detected unauthorized software or calibration in the vehicle's system. Common causes include Aftermarket tuning or reprogramming, Unauthorized software updates, ECM malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P064F 2018 GMC Sierra indicates Unauthorized Software/Calibration Detected.
- Common causes
- Common causes include Aftermarket tuning or reprogramming, Unauthorized software updates, ECM malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P064F 2018 GMC Sierra Description
The P064F diagnostic trouble code (DTC) in a 2018 GMC Sierra indicates that the engine control module (ECM) has detected unauthorized software or calibration in the vehicle's system. This means that the software or calibration in the ECM does not match the manufacturer's specifications, potentially leading to performance issues and safety concerns.
Common Causes of P064F 2018 GMC Sierra
- Aftermarket tuning or reprogramming
- Unauthorized software updates
- ECM malfunction
- Wiring issues
- Sensor malfunction
Symptoms of P064F 2018 GMC Sierra
- Reduced fuel efficiency
- Engine performance issues
- Rough idling or stalling
- Check engine light illuminated
How to Fix P064F 2018 GMC Sierra
- Diagnose the issue using a professional diagnostic tool to identify the specific cause of the unauthorized software or calibration.
- Restore the ECM to its original software and calibration settings.
- Check for any wiring or sensor issues that may have contributed to the problem.
- Clear the DTC and test drive the vehicle to ensure the issue has been resolved.
- If necessary, update the ECM with authorized software and calibration from the manufacturer.
Cost to Fix P064F 2018 GMC Sierra
The typical repair costs for addressing the P064F code in a 2018 GMC Sierra can vary depending on the specific cause of the issue. On average, the repair costs for this type of problem can range from $200 to $500, including parts and labor. However, it's important to note that the actual cost may be higher or lower based on factors such as location, vehicle make and model, and the extent of the repairs needed. It's recommended to consult with a professional mechanic or auto repair shop to get an accurate estimate based on the specific circumstances. Labor rates at auto repair shops typically range from $80 to $150 per hour, but rates may vary in different areas or at different types of repair facilities.
Need more information about the P064F 2018 GMC Sierra code?
Need more information on how to fix the P064F 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P064F 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P064F 2018 GMC Sierra Code
What does the OBDII code P064F mean on a 2018 GMC Sierra?
It indicates "Unauthorized Software/Calibration Detected," meaning the vehicle's control module has identified non-standard or modified software.
What are common symptoms of code P064F in a 2018 GMC Sierra?
Symptoms may include a check engine light, reduced engine performance, or limited functionality of certain vehicle systems.
What causes code P064F to appear on a 2018 GMC Sierra?
The primary cause is aftermarket tuning, unauthorized software calibration, or corrupted factory software in the control module.
Can code P064F affect vehicle performance?
Yes, it can potentially limit performance or disable specific systems to protect the vehicle from damage.
How can code P064F be resolved on a 2018 GMC Sierra?
It can often be fixed by restoring the factory software calibration or replacing the control module if necessary.
Does code P064F indicate a hardware issue?
No, it typically points to a software or calibration issue rather than a physical hardware problem.
Can code P064F be caused by a software update?
Yes, a failed or improper software update can trigger this code, especially if the update is incompatible.
Will clearing the code P064F fix the issue permanently?
No, simply clearing the code won’t resolve the underlying issue unless the software calibration is restored or corrected.
Can aftermarket tuners trigger code P064F in a 2018 GMC Sierra?
Yes, aftermarket tuners or modified software can often cause this code to appear.
Is code P064F covered under warranty for a 2018 GMC Sierra?
If the code is caused by unauthorized modifications, it may void the warranty, and repairs may not be covered.
Discuss the causes and fixes for P064F 2018 GMC Sierra OBDII Code
Code P064F 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.