P064F 2014 GMC Sierra Code - Unauthorized Software/Calibration Detected
Quick Answer
The P064F diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates that unauthorized software or calibration has been detected in the vehicle's engine control module (ECM). Common causes include Aftermarket modifications, Improper software updates, Tampering with the ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P064F 2014 GMC Sierra indicates Unauthorized Software/Calibration Detected.
- Common causes
- Common causes include Aftermarket modifications, Improper software updates, Tampering with the ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P064F 2014 GMC Sierra Description
The P064F diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates that unauthorized software or calibration has been detected in the vehicle's engine control module (ECM). This means that the ECM has detected a discrepancy between the software or calibration that it expects to find and what is actually present. This can lead to a variety of issues with the vehicle's performance and overall operation.
Common Causes of P064F 2014 GMC Sierra
- Aftermarket modifications
- Improper software updates
- Tampering with the ECM
- Faulty ECM
- Electrical issues
Symptoms of P064F 2014 GMC Sierra
- Reduced fuel efficiency
- Engine performance issues
- Rough idling
- Stalling
- Vehicle going into limp mode
How to Fix P064F 2014 GMC Sierra
- Connect a diagnostic scanner to the vehicle's OBD-II port to retrieve the specific details of the unauthorized software or calibration detected.
- Check for any aftermarket modifications or improper software updates that may have caused the issue.
- Reset the ECM to its factory settings and reflash the correct software or calibration.
- Test drive the vehicle to ensure that the issue has been resolved and that the ECM is operating correctly.
- If the problem persists, consider replacing the ECM with a new unit to ensure proper operation.
Cost to Fix P064F 2014 GMC Sierra
The typical repair costs for addressing the P064F code can vary depending on the specific cause of the issue and the extent of the repairs needed. In general, the cost of resetting the ECM and reflashing the correct software or calibration can range from $100 to $300. If the ECM needs to be replaced, the cost can increase significantly, potentially ranging from $500 to $1500 or more. It is important to note that these are rough estimates, and actual costs may vary based on factors such as location, vehicle make and model, and labor rates. It is advisable to consult with a qualified mechanic or dealership for a more accurate cost estimate.
Need more information about the P064F 2014 GMC Sierra code?
Need more information on how to fix the P064F 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P064F 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P064F 2014 GMC Sierra Code
What does the OBDII code P064F mean on a 2014 GMC Sierra?
Code P064F indicates that the vehicle's Engine Control Module (ECM) has detected unauthorized software or calibration changes.
What are common symptoms of code P064F in a 2014 GMC Sierra?
Symptoms typically include the illumination of the Check Engine Light, reduced engine performance, or failure to pass emissions testing.
What causes code P064F to appear in a 2014 GMC Sierra?
This code is often triggered by aftermarket tuning or modifications to the ECM software, unauthorized calibration changes, or corrupted programming.
Can code P064F affect the drivability of my 2014 GMC Sierra?
While drivability may not always be impacted, the vehicle could experience reduced performance or fail to operate optimally.
How can I fix code P064F on a 2014 GMC Sierra?
To resolve this code, restore the ECM to the factory calibration using an OEM-compatible tool or have the dealership reprogram the ECM.
Is it safe to drive my 2014 GMC Sierra with code P064F?
Driving with this code is generally safe, but it is recommended to address it promptly to avoid potential performance or emissions issues.
Will code P064F cause my 2014 GMC Sierra to fail an emissions test?
Yes, this code can result in an emissions test failure due to the unauthorized software or calibration detection.
Can aftermarket tuning trigger code P064F on a 2014 GMC Sierra?
Yes, aftermarket tuning or modifications are common causes of this code since they alter the ECM software from factory specifications.
How much does it cost to fix code P064F on a 2014 GMC Sierra?
The cost varies but typically ranges from $100 to $300 for ECM reprogramming or calibration reset, depending on the service provider.
Do I need a dealership to fix code P064F on my 2014 GMC Sierra?
While a dealership can resolve this code, some independent shops with OEM-compatible tools may also be able to reprogram the ECM.
Discuss the causes and fixes for P064F 2014 GMC Sierra OBDII Code
Code P064F 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.