P0628 Jeep Code - Low Voltage Detected At The Fuel Lift Pump
Quick Answer
The P0628 diagnostic trouble code (DTC) indicates that low voltage has been detected at the fuel lift pump in a Jeep vehicle. Common causes include Faulty fuel pump relay, Wiring issues or damaged connectors, Electrical system malfunctions. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0628 Jeep indicates Low Voltage Detected At The Fuel Lift Pump.
- Common causes
- Common causes include Faulty fuel pump relay, Wiring issues or damaged connectors, Electrical system malfunctions.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0628 Jeep Description
The P0628 diagnostic trouble code (DTC) indicates that low voltage has been detected at the fuel lift pump in a Jeep vehicle. The fuel lift pump is responsible for delivering fuel from the tank to the engine, ensuring that the engine receives the appropriate amount of fuel for combustion. When low voltage is detected at the fuel lift pump, it can lead to a variety of issues that can affect the vehicle's performance and overall functionality.
Common Causes of P0628 Jeep
- Faulty fuel pump relay
- Wiring issues or damaged connectors
- Electrical system malfunctions
- Corrosion or damage to the fuel pump wiring
- Defective fuel lift pump
Symptoms of P0628 Jeep
- Engine hesitation or stalling
- Poor acceleration and reduced power
- Difficulty starting the engine
- Reduced fuel efficiency
- Illumination of the check engine light
How to Fix P0628 Jeep
- Begin by conducting a thorough inspection of the fuel lift pump wiring and connectors to check for any signs of damage or corrosion.
- Test the fuel pump relay to determine if it is functioning correctly. Replace the relay if necessary.
- Use a multimeter to check the voltage at the fuel lift pump and troubleshoot any discrepancies.
- If the voltage is consistently low, consider replacing the fuel lift pump to ensure proper fuel delivery to the engine.
- Clear the diagnostic trouble codes from the vehicle's computer and perform a test drive to confirm that the issue has been resolved.
Cost to Fix P0628 Jeep
The cost of repairing a low voltage issue at the fuel lift pump in a Jeep can vary depending on the specific cause of the problem and the extent of the repairs needed. On average, the cost of parts for this repair can range from $100 to $300, with labor costs adding an additional $100 to $200. It's important to note that diagnosis time and labor rates at auto repair shops can vary, so it's advisable to check with local providers for a more accurate estimate. Additionally, factors such as the vehicle make and model, location, and engine type can also impact the overall cost of the repair.
Tech Notes for P0628 Jeep
Need more information about the P0628 Jeep code?
Need more information on how to fix the P0628 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0628 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0628 Jeep Code
What does the OBDII code P0628 mean in a Jeep?
The P0628 code indicates low voltage has been detected at the fuel lift pump, which may affect fuel delivery to the engine.
What are the common symptoms of the P0628 code in a Jeep?
Symptoms may include engine stalling, difficulty starting, reduced power, or an illuminated check engine light.
What causes the P0628 code to appear in a Jeep?
Common causes include a faulty fuel lift pump, damaged wiring or connectors, a failing fuel pump relay, or a weak battery.
Can a bad fuel pump cause the P0628 code in a Jeep?
Yes, a malfunctioning or failing fuel lift pump is one of the primary causes of this code.
How can I diagnose the P0628 code in my Jeep?
Check the battery voltage, inspect the wiring and connectors to the fuel pump, test the fuel pump relay, and measure the voltage at the fuel lift pump.
Is it safe to drive my Jeep with the P0628 code?
Driving with this code is not recommended as it could lead to engine stalling or cause further damage to the fuel system.
How do I fix the P0628 code in a Jeep?
Repairs may involve replacing the fuel lift pump, repairing damaged wiring or connectors, replacing the fuel pump relay, or ensuring the battery is fully charged.
Can a weak battery trigger the P0628 code in a Jeep?
Yes, a weak or failing battery can cause low voltage at the fuel lift pump, triggering the P0628 code.
What tools do I need to troubleshoot the P0628 code?
You’ll need an OBDII scanner, a multimeter, and possibly a fuel pressure gauge to diagnose the issue accurately.
Will clearing the P0628 code fix the problem?
Clearing the code may turn off the check engine light temporarily, but the underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for P0628 Jeep OBDII Code
Code P0628 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.