P0627 2011 Ford Fusion Code - Fuel Pump 'A' Control Circuit/Open
Quick Answer
The P0627 diagnostic trouble code (DTC) for a 2011 Ford Fusion indicates a problem with the Fuel Pump 'A' Control Circuit being open. Common causes include Damaged wiring or connectors in the fuel pump control circuit, Faulty fuel pump relay, Malfunctioning fuel pump control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0627 2011 Ford Fusion indicates Fuel Pump 'A' Control Circuit/Open.
- Common causes
- Common causes include Damaged wiring or connectors in the fuel pump control circuit, Faulty fuel pump relay, Malfunctioning fuel pump control module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0627 2011 Ford Fusion Description
The P0627 diagnostic trouble code (DTC) for a 2011 Ford Fusion indicates a problem with the Fuel Pump 'A' Control Circuit being open. This means that there is an issue with the electrical circuit that controls the fuel pump in the vehicle. The fuel pump is responsible for pumping fuel from the gas tank to the engine, so any issues with its control circuit can have a significant impact on the vehicle's performance.
Common Causes of P0627 2011 Ford Fusion
- Damaged wiring or connectors in the fuel pump control circuit.
- Faulty fuel pump relay.
- Malfunctioning fuel pump control module.
- Corrosion or poor connections in the fuel pump circuit.
- Electrical issues such as blown fuses or short circuits.
Symptoms of P0627 2011 Ford Fusion
- Engine stalling or hesitation during acceleration.
- Difficulty starting the vehicle.
- Reduced fuel efficiency.
- Check Engine Light illuminated on the dashboard.
- Vehicle may not start at all in severe cases.
How to Fix P0627 2011 Ford Fusion
- Begin by conducting a thorough inspection of the fuel pump control circuit, checking for any damaged wiring or connectors. Repair or replace any damaged components.
- Test the fuel pump relay to ensure it is functioning correctly. Replace if necessary.
- Check the fuel pump control module for any signs of malfunction. Replace if needed.
- Inspect the fuel pump itself for any damage or wear and replace if necessary.
- Clear the DTC with a scan tool and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0627 2011 Ford Fusion
The typical repair costs for addressing a P0627 code on a 2011 Ford Fusion can vary depending on the specific cause of the issue. On average, the cost of parts for this repair can range from $100 to $500, with labor costs adding an additional $100 to $300. This estimate does not include diagnostic time, which can vary depending on the shop's rates and the complexity of the issue. It is advisable to consult with a trusted auto repair shop for a more accurate cost estimate based on your specific situation.
Need more information about the P0627 2011 Ford Fusion code?
Need more information on how to fix the P0627 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0627 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0627 2011 Ford Fusion Code
1. What are the common symptoms of OBDII code P0627 in a 2011 Ford Fusion?
The common symptoms of OBDII code P0627 in a 2011 Ford Fusion may include issues with the fuel pump operation, such as difficulty starting the vehicle, stalling, or poor engine performance.
2. What does the OBDII code P0627 'Fuel Pump 'A' Control Circuit/Open' mean in a 2011 Ford Fusion?
The OBDII code P0627 in a 2011 Ford Fusion specifically indicates an open circuit in the control circuit of fuel pump 'A', leading to potential fuel pump operation issues.
3. What are the possible causes of OBDII code P0627 in a 2011 Ford Fusion?
Possible causes of OBDII code P0627 in a 2011 Ford Fusion include a faulty fuel pump relay, damaged wiring or connectors in the fuel pump circuit, or a defective fuel pump module.
4. How can I diagnose OBDII code P0627 in my 2011 Ford Fusion?
To diagnose OBDII code P0627 in a 2011 Ford Fusion, you can use an OBDII scanner to retrieve the code and then inspect the fuel pump relay, wiring, and connectors for any visible damage or issues.
5. Can I still drive my 2011 Ford Fusion with OBDII code P0627 present?
It is not recommended to drive your 2011 Ford Fusion with OBDII code P0627 present, as it can lead to fuel pump operation issues that may result in vehicle stalling or other performance issues.
6. How do I repair OBDII code P0627 in my 2011 Ford Fusion?
To repair OBDII code P0627 in a 2011 Ford Fusion, you may need to replace the fuel pump relay, repair damaged wiring or connectors in the fuel pump circuit, or replace the faulty fuel pump module.
7. Can a DIY enthusiast fix OBDII code P0627 in a 2011 Ford Fusion?
DIY enthusiasts with automotive repair experience may be able to fix OBDII code P0627 in a 2011 Ford Fusion by following repair guides and using appropriate tools to address the underlying issue.
8. Will resetting the OBDII code P0627 in my 2011 Ford Fusion make it go away permanently?
Resetting the OBDII code P0627 in a 2011 Ford Fusion may temporarily clear the code, but if the underlying issue causing the code is not addressed, it is likely to reappear after driving the vehicle.
9. How much does it cost to repair OBDII code P0627 in a 2011 Ford Fusion?
The cost to repair OBDII code P0627 in a 2011 Ford Fusion can vary depending on the specific cause of the issue, but it may involve replacing parts like the fuel pump relay or fuel pump module, which can range from $100 to $500 or more.
10. Is OBDII code P0627 a common issue in 2011 Ford Fusion vehicles?
OBDII code P0627 related to the fuel pump control circuit is not extremely common in 2011 Ford Fusion vehicles, but it can occur due to various factors like component wear and electrical issues.
Discuss the causes and fixes for P0627 2011 Ford Fusion OBDII Code
Code P0627 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.