P0607 2011 NISSAN ROGUE - Control Module Performance
P0607 2011 NISSAN ROGUE Possible Causes
- Faulty Engine Control Module (ECM)
- Engine Control Module (ECM) Harness power supply circuit is open or shorted
- Engine Control Module (ECM) Programming
First diagnose P0607 2011 NISSAN ROGUE code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.
P0607 2011 NISSAN ROGUE Tech NotesCheck the ECM fuse, if fuse is OK try erasing the code first and if the code comes back you may have to reprogram or replaced the ECM.
Cost of diagnosing the P0607 2011 NISSAN ROGUE code
Labor: 1.0The cost of diagnosing the P0607 2011 NISSAN ROGUE code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
When is the P0607 2011 NISSAN ROGUE code detected?Indicates the ECM has experienced an internal memory fault.
P0607 2011 NISSAN ROGUE Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Engine may not start
P0607 2011 NISSAN ROGUE MeaningThe Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. This self−check insures that the ECM is functioning properly. If any malfunction is detected, the ECM will set the code and illuminate the engine light.
P0607 2011 NISSAN ROGUE More InformationNeed more information on how to fix the P0607 2011 NISSAN ROGUE code?
Get Access to Factory Service Manuals