Engine-Codes.com
Engine-Codes – Ford – P0606 2009 Ford Fusion

P0606 2009 Ford Fusion Code - Powertrain Control Module Internal Communication Error

Quick Answer

The P0606 code for a 2009 Ford Fusion indicates a Powertrain Control Module (PCM) internal communication error. Common causes include Wiring Issues: Faulty or damaged wiring connections between the PCM and other modules can disrupt communication, Faulty PCM: A malfunctioning PCM itself can cause internal communication errors, Software Glitches: Software bugs or errors within the PCM's programming can lead to communication issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0606 2009 Ford Fusion indicates Powertrain Control Module Internal Communication Error.
Common causes
Common causes include Wiring Issues: Faulty or damaged wiring connections between the PCM and other modules can disrupt communication, Faulty PCM: A malfunctioning PCM itself can cause internal communication errors, Software Glitches: Software bugs or errors within the PCM's programming can lead to communication issues.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 17, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0606 2009 Ford Fusion Description

The P0606 code for a 2009 Ford Fusion indicates a Powertrain Control Module (PCM) internal communication error. The PCM is a crucial component of the vehicle's engine control system, responsible for managing various functions such as fuel injection, ignition timing, and emissions control. When the PCM encounters an internal communication error, it means that there is a problem with the module's ability to communicate with other modules or sensors within the vehicle.

OBDII Code P0606 2009 Ford Fusion - Powertrain Control Module Internal Communication Error
P0606 2009 Ford Fusion Code - Powertrain Control Module Internal Communication Error

Common Causes of P0606 2009 Ford Fusion

  1. Wiring Issues: Faulty or damaged wiring connections between the PCM and other modules can disrupt communication.
  2. Faulty PCM: A malfunctioning PCM itself can cause internal communication errors.
  3. Software Glitches: Software bugs or errors within the PCM's programming can lead to communication issues.
  4. Poor Connection: A loose or corroded connection between the PCM and other modules can interfere with communication.
  5. Electrical Interference: External factors such as electromagnetic interference can disrupt communication signals within the vehicle's electronic systems.

Symptoms of P0606 2009 Ford Fusion

  1. Check Engine Light: The most common symptom associated with a P0606 code is the illumination of the check engine light on the dashboard.
  2. Reduced Performance: The vehicle may experience a decrease in performance, such as reduced power or acceleration.
  3. Rough Idling: The engine may idle roughly or inconsistently, indicating a problem with the PCM's communication.
  4. Stalling: The vehicle may stall unexpectedly, especially when idling or coming to a stop.
  5. Difficulty Starting: The engine may have difficulty starting, requiring multiple attempts before it turns over.

How to Fix P0606 2009 Ford Fusion

  1. Diagnostic Scan: Use a diagnostic scanner to retrieve the specific error codes and pinpoint the cause of the internal communication error.
  2. Check Wiring: Inspect the wiring harness for any signs of damage, corrosion, or loose connections. Repair or replace as needed.
  3. Test PCM: Test the PCM for functionality to determine if it is the source of the communication error. Replace the PCM if necessary.
  4. Update Software: Check for any available software updates for the PCM and other modules to address potential software glitches.
  5. Clear Codes: After completing the repairs, clear the error codes and reset the PCM to see if the communication error has been resolved.

Cost to Fix P0606 2009 Ford Fusion

The typical repair costs for addressing a P0606 code on a 2009 Ford Fusion can range from $200 to $600, depending on the specific cause of the internal communication error. This estimate includes the cost of diagnostic scans, potential replacement of the PCM, wiring repairs, and labor. It's important to note that the actual costs may vary based on the location of the repair shop, the make and model of the vehicle, and the extent of the repairs needed. Additionally, labor rates at auto repair shops can vary between $80 and $150 per hour, with rates potentially higher at dealerships or in metropolitan areas. To obtain a more accurate estimate, it is recommended to consult with local auto repair shops.

What does this mean?

Tech Notes for P0606 2009 Ford Fusion

Check the Powertrain Control Module (PCM) fuse, if the fuse is OK, try erasing the code first and if the code comes back you may have to reprogram or replace the PCM.

Need more information about the P0606 2009 Ford Fusion code?

Need more information on how to fix the P0606 2009 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0606 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0606 2009 Ford Fusion Code

1. What does the OBDII code P0606 mean for a 2009 Ford Fusion?

P0606 indicates an internal communication error within the Powertrain Control Module (PCM), suggesting it has failed or is malfunctioning.

2. What are the common symptoms of the P0606 code in a 2009 Ford Fusion?

Symptoms may include the Check Engine Light turning on, engine stalling, rough idling, poor performance, or the vehicle failing to start.

3. What causes the P0606 code to appear in a 2009 Ford Fusion?

Common causes include a faulty PCM, software corruption, electrical issues such as damaged wiring or poor ground connections, or voltage irregularities from the battery or alternator.

4. Can a low battery cause the P0606 code in a 2009 Ford Fusion?

Yes, a low or failing battery, or issues with the alternator, can cause voltage fluctuations that may trigger the P0606 code.

5. Is the PCM the only component at fault when the P0606 code appears?

Not necessarily. While the PCM is often the culprit, related issues such as wiring damage, loose connections, or incorrect voltage levels should be checked before replacing the PCM.

6. How can I diagnose the P0606 code on my 2009 Ford Fusion?

Start by inspecting the battery, alternator, and wiring for issues. Then, test the PCM connectors and grounds. If no external problems are found, the PCM itself may need further testing or replacement.

7. Can the P0606 code be cleared without fixing the problem on a 2009 Ford Fusion?

You can clear the code temporarily using an OBDII scanner, but if the underlying issue isn’t resolved, the code will likely return.

8. How much does it cost to fix a P0606 code on a 2009 Ford Fusion?

Repair costs vary. Diagnosing and fixing wiring or ground issues may cost $100-$300, while PCM replacement and programming can cost $500-$1,500 or more depending on labor rates.

9. Can I drive my 2009 Ford Fusion with the P0606 code?

Driving with the P0606 code isn’t recommended, as it can lead to unpredictable engine performance, stalling, or even failure to start.

10. Does the PCM need to be reprogrammed after replacement for a P0606 code?

Yes, if the PCM is replaced, it must be reprogrammed to match the vehicle’s specifications, which typically requires specialized tools and software.

Discuss the causes and fixes for P0606 2009 Ford Fusion OBDII Code

Submit a New Comment

Code P0606 2009 Ford Fusion comments

No comments found for this page.