P0572 2011 Ford Fusion Code - Brake Switch 'A' Circuit Low
Quick Answer
The P0572 diagnostic trouble code for a 2011 Ford Fusion indicates that there is an issue with the Brake Switch 'A' Circuit being low. Common causes include Faulty brake switch, Damaged wiring or connectors in the circuit, Corrosion in the brake switch circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0572 2011 Ford Fusion indicates Brake Switch 'A' Circuit Low.
- Common causes
- Common causes include Faulty brake switch, Damaged wiring or connectors in the circuit, Corrosion in the brake switch circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0572 2011 Ford Fusion Description
The P0572 diagnostic trouble code for a 2011 Ford Fusion indicates that there is an issue with the Brake Switch 'A' Circuit being low. The brake switch is a vital component of the vehicle's braking system, as it is responsible for sending a signal to the vehicle's computer when the brake pedal is pressed. This signal is used to activate the brake lights, disengage cruise control, and other safety functions. When the circuit is reading low, it means that the voltage being sent by the brake switch is lower than the expected range, which can lead to various issues with the vehicle's performance and safety systems.
Common Causes of P0572 2011 Ford Fusion
- Faulty brake switch
- Damaged wiring or connectors in the circuit
- Corrosion in the brake switch circuit
- Issues with the vehicle's computer system
- Low battery voltage affecting the circuit
Symptoms of P0572 2011 Ford Fusion
- Brake lights not working properly
- Cruise control not disengaging when brake pedal is pressed
- Check Engine Light illuminated
- Difficulty shifting out of park
- ABS or traction control warning lights on
How to Fix P0572 2011 Ford Fusion
- Begin by locating the brake switch, typically located near the brake pedal.
- Inspect the wiring and connectors for any damage or corrosion.
- Test the brake switch using a multimeter to check for proper voltage output.
- If the brake switch is faulty, replace it with a new one.
- Clear the diagnostic trouble codes and test the vehicle to ensure the issue has been resolved.
Cost to Fix P0572 2011 Ford Fusion
The typical repair costs for addressing a P0572 code on a 2011 Ford Fusion can range from $100 to $300, depending on the specific cause of the issue and the cost of parts and labor in your area. Keep in mind that diagnosis time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate.
Tech Notes for P0572 2011 Ford Fusion
When is the Code Detected?
Need more information about the P0572 2011 Ford Fusion code?
Need more information on how to fix the P0572 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0572 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0572 2011 Ford Fusion Code
1. What does OBDII code P0572 on a 2011 Ford Fusion mean?
The code P0572 in a 2011 Ford Fusion indicates a problem with the Brake Switch 'A' Circuit Low.
2. What are the common symptoms of OBDII code P0572 in a 2011 Ford Fusion?
Common symptoms of code P0572 include the brake lights staying on, difficulty shifting out of park, and the cruise control not working.
3. What are the possible causes of OBDII code P0572 in a 2011 Ford Fusion?
Possible causes of code P0572 include a faulty brake light switch, wiring issues in the brake light circuit, or a malfunctioning brake light control module.
4. How can I diagnose the OBDII code P0572 in my 2011 Ford Fusion?
To diagnose code P0572, you can start by checking the brake light switch for proper operation, inspecting the wiring for any damage, and testing the brake light control module.
5. How serious is OBDII code P0572 in a 2011 Ford Fusion?
While code P0572 may not cause immediate drivability issues, it is important to address it promptly to ensure the proper functioning of the brake lights and other related systems.
6. Can I still drive my 2011 Ford Fusion with OBDII code P0572 active?
It is generally safe to drive your Fusion with code P0572, but it is recommended to have it diagnosed and repaired as soon as possible to avoid potential safety hazards.
7. How much does it typically cost to repair OBDII code P0572 in a 2011 Ford Fusion?
The cost of repairing code P0572 can vary depending on the underlying cause. It may range from a simple brake light switch replacement to more extensive wiring repairs.
8. Can I reset the OBDII code P0572 in my 2011 Ford Fusion using an OBDII scanner?
Yes, you can use an OBDII scanner to reset the code P0572 after addressing the underlying issue. However, if the problem persists, the code may reappear.
9. Are there any DIY repair tips for fixing OBDII code P0572 in a 2011 Ford Fusion?
If you are comfortable with automotive repairs, you may attempt to replace the brake light switch yourself after confirming it as the cause of the code P0572.
10. Is it recommended to seek professional help for diagnosing and repairing OBDII code P0572 in a 2011 Ford Fusion?
For accurate diagnosis and proper repair of code P0572, it is advisable to seek the assistance of a qualified mechanic or automotive technician familiar with Ford vehicles.
Discuss the causes and fixes for P0572 2011 Ford Fusion OBDII Code
Code P0572 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.