Engine-CodesJeep – P0520 Jeep

P0520 Jeep Code - Engine Oil Pressure Sensor/Switch Circuit Malfunction

Quick Answer

The P0520 code in a Jeep indicates a malfunction in the Engine Oil Pressure Sensor/Switch Circuit. Common causes include Faulty engine oil pressure sensor or switch, Wiring or electrical issues in the circuit connecting the sensor to the engine control module, Low engine oil level or degraded oil quality. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0520 Jeep indicates Engine Oil Pressure Sensor/Switch Circuit Malfunction.
Common causes
Common causes include Faulty engine oil pressure sensor or switch, Wiring or electrical issues in the circuit connecting the sensor to the engine control module, Low engine oil level or degraded oil quality.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 09, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0520 Jeep Description

The P0520 code in a Jeep indicates a malfunction in the Engine Oil Pressure Sensor/Switch Circuit. This sensor is responsible for monitoring the engine oil pressure and sending this information to the vehicle's computer system. The engine oil pressure is crucial for lubricating the engine components and ensuring smooth operation. When this sensor malfunctions, it can lead to inaccurate readings or a complete failure to monitor the oil pressure, which can have serious consequences for the engine's health and performance.

OBDII Code P0520 Jeep - Engine Oil Pressure Sensor/Switch Circuit Malfunction
P0520 Jeep Code - Engine Oil Pressure Sensor/Switch Circuit Malfunction

Common Causes of P0520 Jeep

  1. Faulty engine oil pressure sensor or switch.
  2. Wiring or electrical issues in the circuit connecting the sensor to the engine control module.
  3. Low engine oil level or degraded oil quality.
  4. Oil pump failure or blockage in the oil passages.
  5. Engine mechanical problems such as worn bearings or a clogged oil filter.

Symptoms of P0520 Jeep

  1. Illumination of the check engine light on the dashboard.
  2. Engine oil pressure gauge reading abnormally high or low.
  3. Engine knocking or tapping noises, especially at idle or under load.
  4. Engine performance issues such as loss of power or stalling.
  5. Excessive oil consumption or visible oil leaks.

How to Fix P0520 Jeep

  1. Begin by visually inspecting the engine oil level and quality. Top up the oil if necessary and ensure it meets the manufacturer's specifications.
  2. Use a diagnostic scan tool to retrieve the trouble codes and pinpoint the exact cause of the issue.
  3. Inspect the wiring harness and connectors associated with the oil pressure sensor for any damage or corrosion. Repair or replace as needed.
  4. Test the oil pressure sensor using a multimeter to check for proper resistance and voltage readings. Replace the sensor if it fails the test.
  5. If the sensor replacement does not resolve the issue, further diagnosis of the oil pump, engine mechanical components, or engine control module may be necessary.

Cost to Fix P0520 Jeep

The cost of repairing a P0520 code in a Jeep can vary depending on the specific cause of the issue and the labor rates in your area. In general, replacing the engine oil pressure sensor can cost between $100 and $300, including parts and labor. However, if additional repairs or diagnostics are needed, the total cost may increase. It's recommended to consult with a qualified mechanic or auto repair shop for a more accurate estimate based on your vehicle's make and model. Keep in mind that labor rates can fluctuate, so it's advisable to shop around for the best deal.

When is the Code Detected?

The P0520 is detected when the circuit from oil pressure sensor to PCM is malfunction

Need more information about the P0520 Jeep code?

Need more information on how to fix the P0520 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0520 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0520 Jeep Code

No Frequently Asked Questions about P0520 Jeep Code found.

Discuss the causes and fixes for P0520 Jeep OBDII Code

Code P0520 Jeep comments

No comments found for this page.