P0507 2015 GMC Sierra Code - Idle Speed High
Quick Answer
The diagnostic trouble code P0507 for a 2015 GMC Sierra indicates that the idle speed of the engine is higher than the manufacturer's specified range. Common causes include Malfunctioning idle air control valve, Dirty or faulty throttle body, Vacuum leaks in the intake system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0507 2015 GMC Sierra indicates Idle Speed High.
- Common causes
- Common causes include Malfunctioning idle air control valve, Dirty or faulty throttle body, Vacuum leaks in the intake system.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0507 2015 GMC Sierra Description
The diagnostic trouble code P0507 for a 2015 GMC Sierra indicates that the idle speed of the engine is higher than the manufacturer's specified range. The idle speed refers to the rotational speed of the engine when the vehicle is stationary and the engine is running. When the idle speed is too high, it can lead to various performance issues and potential long-term effects if not addressed promptly.
Common Causes of P0507 2015 GMC Sierra
- Malfunctioning idle air control valve
- Dirty or faulty throttle body
- Vacuum leaks in the intake system
- Faulty engine sensors (such as the throttle position sensor or mass airflow sensor)
- Issues with the engine control module (ECM)
Symptoms of P0507 2015 GMC Sierra
- Rough idling
- Stalling at idle
- Increased fuel consumption
- Engine noise and vibrations
- Check engine light illuminated
How to Fix P0507 2015 GMC Sierra
- Perform a diagnostic scan to confirm the P0507 code and identify the specific cause of the high idle speed.
- Inspect and clean the throttle body to ensure proper airflow.
- Check for vacuum leaks in the intake system and repair as necessary.
- Test and, if needed, replace the idle air control valve.
- Reset the engine control module and perform an idle relearn procedure to recalibrate the idle speed.
Cost to Fix P0507 2015 GMC Sierra
The cost of repairing a high idle speed issue can vary depending on the specific cause and the labor rates in your area. On average, the repair costs for this issue can range from $100 to $500, including parts and labor. Keep in mind that diagnostic time and labor rates at auto repair shops can vary, so it's recommended to obtain a few quotes from different shops to get a more accurate estimate.
Tech Notes for P0507 2015 GMC Sierra
The Engine Control Module (ECM) learns the idle position of the throttle plate to ensure the correct idle. Anytime the throttle body is cleaned or replaced, the ECM must learn the new throttle position. The idle may be unstable or a DTC may be set if the throttle position is not learned.
Chevrolet Throttle Body Cleaning and Idle Learning Procedure
User Submitted Video
Need more information about the P0507 2015 GMC Sierra code?
Need more information on how to fix the P0507 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0507 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0507 2015 GMC Sierra Code
1. What does the OBDII code P0507 mean on a 2015 GMC Sierra?
P0507 indicates that the idle control system is running at a higher RPM than the manufacturer’s specified range.
2. What are the common symptoms of code P0507 in a 2015 GMC Sierra?
Symptoms may include a high or fluctuating idle speed, poor fuel economy, difficulty slowing down, and possible illumination of the check engine light.
3. What causes the P0507 code to appear on a 2015 GMC Sierra?
Common causes include a dirty or faulty throttle body, vacuum leaks, a malfunctioning idle air control (IAC) valve, or issues with the PCV system.
4. Can vacuum leaks trigger code P0507 on a 2015 GMC Sierra?
Yes, vacuum leaks can cause the engine to draw in unmetered air, leading to a higher-than-expected idle speed and triggering the P0507 code.
5. How can I fix the P0507 code on my 2015 GMC Sierra?
Fixes may involve cleaning the throttle body, inspecting and repairing vacuum leaks, replacing the IAC valve if faulty, or reprogramming/resetting the engine control module (ECM).
6. Is it safe to drive a 2015 GMC Sierra with the P0507 code?
While the vehicle may still be drivable, a high idle speed can cause increased wear on engine components and reduced fuel efficiency. It’s best to address the issue promptly.
7. How do I clean the throttle body to resolve the P0507 code?
Disconnect the intake hose, spray throttle body cleaner on the throttle plate and housing, and gently scrub with a soft brush or cloth. Be cautious not to damage sensitive components.
8. Could a faulty PCV valve cause the P0507 code on a 2015 GMC Sierra?
Yes, a malfunctioning PCV valve can create a vacuum leak or disrupt crankcase ventilation, leading to higher idle speeds and triggering the code.
9. Do I need to reset the ECM after fixing the P0507 code?
It’s recommended to clear the code and reset the ECM using an OBDII scanner after repairs to ensure the system recalibrates properly.
10. Can a dirty mass airflow (MAF) sensor cause the P0507 code on a 2015 GMC Sierra?
Yes, a dirty or faulty MAF sensor can send incorrect air intake data to the ECM, potentially affecting idle speed and triggering the P0507 code.
Discuss the causes and fixes for P0507 2015 GMC Sierra OBDII Code
Code P0507 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.