Engine-CodesChevrolet – P0506 2014 Chevrolet Silverado

P0506 2014 Chevrolet Silverado Code - Idle Speed Low

Quick Answer

The P0506 diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado indicates that the vehicle's idle speed is lower than the programmed range set by the manufacturer. Common causes include Faulty idle control valve, Vacuum leaks in the intake system, Dirty or malfunctioning throttle body. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0506 2014 Chevrolet Silverado indicates Idle Speed Low.
Common causes
Common causes include Faulty idle control valve, Vacuum leaks in the intake system, Dirty or malfunctioning throttle body.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 12, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0506 2014 Chevrolet Silverado Description

The P0506 diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado indicates that the vehicle's idle speed is lower than the programmed range set by the manufacturer. The idle speed is the rotational speed of the engine when the vehicle is not in motion and the throttle is not engaged. When the idle speed is too low, it can lead to a rough or unstable idle, stalling, and poor engine performance. This issue can be caused by a variety of factors, including problems with the idle control system, vacuum leaks, or issues with the throttle body.

OBDII Code P0506 2014 Chevrolet Silverado - Idle Speed Low
P0506 2014 Chevrolet Silverado Code - Idle Speed Low

Common Causes of P0506 2014 Chevrolet Silverado

  1. Faulty idle control valve
  2. Vacuum leaks in the intake system
  3. Dirty or malfunctioning throttle body
  4. Clogged air filter restricting airflow to the engine
  5. Issues with the fuel system, such as a clogged fuel filter or failing fuel pump

Symptoms of P0506 2014 Chevrolet Silverado

  1. Rough or unstable idle
  2. Stalling when the vehicle is at a stop
  3. Reduced engine performance
  4. Engine hesitation or misfires
  5. Check Engine Light illuminated on the dashboard

How to Fix P0506 2014 Chevrolet Silverado

  1. Perform a thorough inspection of the idle control system, including the idle control valve and associated wiring. Replace any faulty components.
  2. Check for vacuum leaks in the intake system using a smoke machine or propane torch. Repair any leaks found and ensure all connections are secure.
  3. Clean the throttle body to remove any carbon buildup that may be obstructing airflow. Consider replacing the throttle body if cleaning does not resolve the issue.
  4. Inspect and replace the air filter if it is dirty or clogged, restricting airflow to the engine.
  5. Check the fuel system for any issues, such as a clogged fuel filter or failing fuel pump. Replace any faulty components as needed.

Cost to Fix P0506 2014 Chevrolet Silverado

The typical repair costs for addressing a P0506 code on a 2014 Chevrolet Silverado can range from $100 to $500, depending on the specific cause of the low idle speed and the cost of parts and labor. It is important to note that diagnosis time and labor rates can vary between auto repair shops, so it is recommended to obtain quotes from multiple sources to ensure a fair price. Keep in mind that rates may be higher at dealerships or in metropolitan areas, while independent shops often offer more competitive pricing.

Tech Notes for P0506 2014 Chevrolet Silverado

If there are no intake leaks, clean the throttle body, adjust the engine idle, and clear the engine code. If the code persists you must replace the Electric Throttle Actuator Motor (Located in the Throttle Body Assembly).



The Engine Control Module (ECM) learns the idle position of the throttle plate to ensure the correct idle. Anytime the throttle body is cleaned or replaced, the ECM must learn the new throttle position. The idle may be unstable or a DTC may be set if the throttle position is not learned.



Chevrolet Throttle Body Cleaning and Idle Learning Procedure











User Submitted Video

Need more information about the P0506 2014 Chevrolet Silverado code?

Need more information on how to fix the P0506 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0506 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0506 2014 Chevrolet Silverado Code

No Frequently Asked Questions about P0506 2014 Chevrolet Silverado Code found.

Discuss the causes and fixes for P0506 2014 Chevrolet Silverado OBDII Code

Code P0506 2014 Chevrolet Silverado comments

No comments found for this page.