Engine-Codes.com
Engine-Codes – Generic – P0470

P0470 Code - Exhaust Pressure Sensor Malfunction

Quick Answer

The P0470 diagnostic trouble code (DTC) indicates a malfunction in the exhaust pressure sensor circuit. Common causes include Faulty Sensor: The exhaust pressure sensor itself may be faulty and in need of replacement, Wiring Issues: Corrosion, damage, or poor connections in the wiring harness connected to the sensor can cause this code to trigger, Exhaust Blockage: A blockage in the exhaust system, such as a clogged catalytic converter or diesel particulate filter, can affect the exhaust pressure readings. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0470 indicates Exhaust Pressure Sensor Malfunction.
Common causes
Common causes include Faulty Sensor: The exhaust pressure sensor itself may be faulty and in need of replacement, Wiring Issues: Corrosion, damage, or poor connections in the wiring harness connected to the sensor can cause this code to trigger, Exhaust Blockage: A blockage in the exhaust system, such as a clogged catalytic converter or diesel particulate filter, can affect the exhaust pressure readings.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
What is this?
Table of contents Created and updated by William Orellana on Sep 06, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0470 Description

The P0470 diagnostic trouble code (DTC) indicates a malfunction in the exhaust pressure sensor circuit. This sensor is responsible for monitoring the exhaust back pressure in the exhaust system. The data collected by the exhaust pressure sensor is crucial for the engine control module (ECM) to adjust fuel delivery and ensure optimal engine performance. When this sensor malfunctions, it can lead to incorrect fueling, reduced engine efficiency, and potentially higher emissions.

OBDII Code P0470 - Exhaust Pressure Sensor Malfunction
P0470 Code - Exhaust Pressure Sensor Malfunction

Common Causes of P0470

  1. Faulty Sensor: The exhaust pressure sensor itself may be faulty and in need of replacement.
  2. Wiring Issues: Corrosion, damage, or poor connections in the wiring harness connected to the sensor can cause this code to trigger.
  3. Exhaust Blockage: A blockage in the exhaust system, such as a clogged catalytic converter or diesel particulate filter, can affect the exhaust pressure readings.
  4. ECM Failure: A malfunction in the engine control module that processes the sensor's data can also trigger this code.

Symptoms of P0470

  1. Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the dashboard.
  2. Reduced Engine Power: The vehicle may experience a loss of power or acceleration due to incorrect fueling caused by the faulty sensor.
  3. Poor Fuel Economy: A malfunctioning exhaust pressure sensor can lead to poor fuel efficiency as the engine may not be receiving the correct data for fuel delivery.
  4. Rough Idle: The engine may idle erratically or inconsistently, leading to a rough running condition.

How to Fix P0470

  1. Diagnostic Scan: Begin by using an OBD-II scanner to retrieve the specific trouble code and confirm the issue with the exhaust pressure sensor.
  2. Sensor Replacement: Replace the faulty exhaust pressure sensor with a new, manufacturer-approved part.
  3. Check Wiring: Inspect the wiring harness for any damage, corrosion, or loose connections, repairing or replacing as necessary.
  4. Exhaust System Inspection: Check for any blockages or restrictions in the exhaust system that may be affecting pressure readings.
  5. Clear DTCs: After completing the repairs, clear the diagnostic trouble codes and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P0470

The cost of repairing a P0470 code can vary depending on the vehicle make and model, as well as the location and labor rates of the repair shop. On average, the repair cost for replacing an exhaust pressure sensor ranges from $150 to $300, including parts and labor. Additional costs may apply if there are wiring issues or exhaust system blockages that need to be addressed. It's recommended to obtain a personalized quote from a trusted mechanic to get an accurate estimate for this repair.

What does this mean?

Tech Notes for P0470

Replacing the exhaust back pressure usually takes care of the problem

When is the Code Detected?

An Exhaust Back Pressure (EBP) signal that is detected out of range (high or low) by the Engine Control Module (ECM) will cause the engine to ignore the EBP signal and disable exhaust back pressure operation.

Need more information about the P0470 code?

Need more information on how to fix the P0470 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0470 code diagnosed by a professional: Find a repair shop in your area

Code P0470 Information for Specific Makes

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0470 Code

No Frequently Asked Questions about P0470 Code found.

Discuss the causes and fixes for P0470 OBDII Code

Submit a New Comment

Code P0470 comments

No comments found for this page.