P0462 Dodge Code - Fuel Level Sensor 1 Circuit Low
Quick Answer
The P0462 diagnostic trouble code (DTC) for Dodge vehicles indicates a problem with the fuel level sensor 1 circuit being too low. Common causes include Faulty fuel level sensor, Damaged wiring or connectors, Corrosion or debris in the fuel tank affecting sensor readings. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0462 Dodge indicates Fuel Level Sensor 1 Circuit Low.
- Common causes
- Common causes include Faulty fuel level sensor, Damaged wiring or connectors, Corrosion or debris in the fuel tank affecting sensor readings.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0462 Dodge Description
The P0462 diagnostic trouble code (DTC) for Dodge vehicles indicates a problem with the fuel level sensor 1 circuit being too low. This sensor is responsible for measuring the amount of fuel in the tank and sending this information to the vehicle's engine control module (ECM). The ECM uses this data to calculate fuel consumption, optimize engine performance, and display the fuel level on the dashboard gauge.
Common Causes of P0462 Dodge
- Faulty fuel level sensor
- Damaged wiring or connectors
- Corrosion or debris in the fuel tank affecting sensor readings
- ECM malfunction
- Electrical issues such as a blown fuse or relay
Symptoms of P0462 Dodge
- Inaccurate fuel level readings on the dashboard gauge
- Check engine light illuminated
- Engine stalling or hesitation during acceleration
- Difficulty starting the vehicle
- Reduced fuel efficiency
How to Fix P0462 Dodge
- Diagnose the issue by using a scan tool to read the DTC and inspecting the fuel level sensor, wiring, and connectors for damage.
- Replace the fuel level sensor if it is found to be faulty or damaged.
- Repair or replace any damaged wiring or connectors in the circuit.
- Clear the DTC and reset the ECM to see if the issue is resolved.
- Test drive the vehicle to verify that the fuel level readings are accurate and the symptoms have been eliminated.
Cost to Fix P0462 Dodge
The cost of repairing a P0462 DTC for a Dodge vehicle can vary depending on the specific model and year. On average, the parts for this repair, including a new fuel level sensor and any necessary wiring or connectors, may range from $100 to $300. Labor costs can add an additional $100 to $200, bringing the total repair cost to approximately $200 to $500. However, it's essential to check with local auto repair shops for accurate pricing, as rates can fluctuate based on location and other factors.
Tech Notes for P0462 Dodge
User Submitted Video
When is the Code Detected?
Need more information about the P0462 Dodge code?
Need more information on how to fix the P0462 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0462 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0462 Dodge Code
No Frequently Asked Questions about P0462 Dodge Code found.
Discuss the causes and fixes for P0462 Dodge OBDII Code
-
Usually the problem is the fuel level sensor, which is inside the gas tank.
-
Because is triggering the code. Is either the sensor or the wire harness, but the most common problem is the sensor.
What model and year is your Dodge?
-
-
I changed both pumps independent of each other and still my level is off
-
Can this also cause the car to feel like there is also a miss in the engine?
-
I never seen a bad fuel level sensor causing an engine miss. You could have contaminated fuel in the tank, that could cause both, specially the engine miss.
-
How do you fix the problem of the Fuel light on and the fuel gauge stuck on E even though the tank is full?
-
2006 Dodge Caravan fuel light is on and engine light. Fuel light shows Empty and Fuel Gauge stuck on E. How do you fix the problem?
-
More than likely the problem is the the Fuel Level Sensor, which is inside the fuel tank. This video is not exactly for your car, but it is the same idea:
-
hi i just changed the fuel level sensor, because i received code p.0462 the engine light came off but then reappear after driving it again do you think is the wiring that needs to be replace?
-
Let me find more information about your problem. What model and year is your vehicle?
-
My code reader says [fuel level sensor circuit A low. what side of the car is A ?
-
What is the model and year of your vehicle? On most vehicles, there is only one "Fuel Level Sensor," also called "Fuel Level Sensor 1" or "Fuel Level Sensor A." If there are two fuel level sensors, the sensor "A" or "1" is typically on the driver side.
-
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.