The P0455 code means that the control module has detected a small leak in the Evaporative Emission (EVAP). A loose fuel tank filler cap is the most common cause that will trigger the P0455 code.
Check the 'Possible Causes' listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.
Search for P0455 Questions and Answers: Search here →
What is the Cost to Diagnose the Code?
Labor: 1.0
The cost to diagnose the P0455 code is 1.0 hour of labor. The diagnosis time and labor rates at auto repair shops vary depending on the location, make and model of the vehicle, and even the engine type. Most auto repair shops charge between $75 and $150 per hour.
What are Code Possible Symptoms?
Engine Light ON (or Service Engine Soon Warning Light)
A noticeable fuel odor may result from fuel vapor release
What Does the P0455 Code Mean?
The Engine Control Module (ECM) tests the Evaporative Emission (EVAP) system for a large leak or restrictions to the purge path in the EVAP system. When the enabling criteria has been met, the ECM commands the EVAP vent solenoid valve and purges the solenoid valve ON, allowing vacuum into the EVAP system. The ECM monitors the fuel tank pressure sensor voltage to verify that the system is able to reach a calibrated level of vacuum before a calibrated amount of purge volume has passed through the system. The Diagnostic Trouble Code (DTC) will be set when the EVAP system is not able to achieve or maintain a calibrated level of vacuum less than -2.74 kPa (-11 in H20) before a calibrated amount of purge volume has passed through the system.
P0455 Code - Evaporative Emission Control System Leak Detected Gross Leak