Engine-Codes.com
Engine-Codes – Ford – P0451 2010 Ford Fusion

P0451 2010 Ford Fusion Code - Evaporative Emission Control System Pressure Sensor Range/Performance

Quick Answer

The P0451 code for a 2010 Ford Fusion indicates a problem with the Evaporative Emission Control System Pressure Sensor, specifically relating to its range or performance. Common causes include Faulty evaporative emission control system pressure sensor, Damaged or corroded wiring/connectors related to the sensor, Evaporative emission control system leaks. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
P0451 2010 Ford Fusion indicates Evaporative Emission Control System Pressure Sensor Range/Performance.
Common causes
Common causes include Faulty evaporative emission control system pressure sensor, Damaged or corroded wiring/connectors related to the sensor, Evaporative emission control system leaks.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
What is this?
Table of contents Created and updated by William Orellana on Sep 17, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0451 2010 Ford Fusion Description

The P0451 code for a 2010 Ford Fusion indicates a problem with the Evaporative Emission Control System Pressure Sensor, specifically relating to its range or performance. The evaporative emission control system is responsible for capturing and storing fuel vapors from the fuel tank to prevent them from escaping into the atmosphere. The pressure sensor plays a crucial role in monitoring the pressure within the system to ensure it is functioning properly.

OBDII Code P0451 2010 Ford Fusion - Evaporative Emission Control System Pressure Sensor Range/Performance
P0451 2010 Ford Fusion Code - Evaporative Emission Control System Pressure Sensor Range/Performance

Common Causes of P0451 2010 Ford Fusion

  1. Faulty evaporative emission control system pressure sensor
  2. Damaged or corroded wiring/connectors related to the sensor
  3. Evaporative emission control system leaks
  4. Issues with the fuel tank pressure sensor
  5. Faulty PCM (Powertrain Control Module)

Symptoms of P0451 2010 Ford Fusion

  1. Check engine light illuminated
  2. Decreased fuel efficiency
  3. Rough idling or stalling
  4. Strong fuel odor
  5. Failed emissions test

How to Fix P0451 2010 Ford Fusion

  1. Diagnose the issue by using a scan tool to read the code and determine the specific cause of the problem.
  2. Inspect the evaporative emission control system pressure sensor and related wiring/connectors for any damage or corrosion.
  3. Repair or replace the faulty sensor or wiring/connectors as needed.
  4. Check for any leaks in the evaporative emission control system and repair them if necessary.
  5. Clear the code and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P0451 2010 Ford Fusion

The cost of repairing a P0451 code on a 2010 Ford Fusion can vary depending on the specific cause of the issue and the labor rates in your area. On average, you can expect to pay between $100 to $300 for parts and labor. Keep in mind that diagnostic time and labor rates can vary, so it's recommended to check with local auto repair shops for a more accurate estimate.

When is the Code Detected?

An improper voltage signal from EVAP control system pressure sensor is sent to Engine Control Module (ECM).

Need more information about the P0451 2010 Ford Fusion code?

Need more information on how to fix the P0451 2010 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0451 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0451 2010 Ford Fusion Code

1. What does OBDII code P0451 for a 2010 Ford Fusion mean?

The code P0451 indicates a problem with the Evaporative Emission Control System Pressure Sensor Range/Performance in the vehicle.

2. What are the common symptoms of OBDII code P0451 in a 2010 Ford Fusion?

Common symptoms of P0451 may include issues with the vehicle's fuel economy, rough idling, or the illumination of the check engine light.

3. What are the possible causes of OBDII code P0451 in a 2010 Ford Fusion?

Possible causes of P0451 include a faulty evaporative emission control system pressure sensor, a damaged sensor wiring harness, or a problem with the vehicle's fuel tank pressure sensor.

4. How can I diagnose the OBDII code P0451 in my 2010 Ford Fusion?

Diagnosing P0451 typically involves using a scan tool to read the code, inspecting the wiring and connectors related to the pressure sensor, and conducting a smoke test to check for leaks in the evaporative emission control system.

5. Can I continue driving my 2010 Ford Fusion with OBDII code P0451?

It is generally not recommended to continue driving with a P0451 code, as it can lead to decreased fuel efficiency and potential damage to the vehicle's emissions system.

6. How can I repair OBDII code P0451 in my 2010 Ford Fusion?

Repairing P0451 may involve replacing the evaporative emission control system pressure sensor, repairing any damaged wiring or connectors, or addressing any leaks in the system.

7. Are there any DIY tips for fixing OBDII code P0451 in a 2010 Ford Fusion?

While some basic troubleshooting steps can be taken, it is recommended to consult a professional mechanic for proper diagnosis and repair of P0451 to ensure the issue is resolved correctly.

8. How much does it cost to fix OBDII code P0451 in a 2010 Ford Fusion?

The cost of fixing P0451 can vary depending on the exact cause of the issue, but it may involve parts and labor costs ranging from $100 to $300 or more.

9. Can a P0451 code in a 2010 Ford Fusion cause emissions test failure?

Yes, a P0451 code can cause the vehicle to fail emissions tests, as it indicates a problem with the evaporative emission control system, which is essential for reducing harmful emissions from the vehicle.

10. How often does OBDII code P0451 occur in a 2010 Ford Fusion?

P0451 is a relatively common OBDII code that can occur in a 2010 Ford Fusion, especially as the vehicle ages and components of the evaporative emission control system wear out or become faulty.

Discuss the causes and fixes for P0451 2010 Ford Fusion OBDII Code

Submit a New Comment

Code P0451 2010 Ford Fusion comments

No comments found for this page.