Engine-Codes.com
Engine-Codes – Infiniti – P0451 2005 Infiniti G35

P0451 2005 Infiniti G35 Code - EVAP Control System Pressure Sensor Performance

Quick Answer

The P0451 code for a 2005 Infiniti G35 relates to the EVAP (Evaporative Emission Control) system pressure sensor performance. Common causes include Faulty Pressure Sensor: The pressure sensor itself may be faulty and not providing accurate readings, Wiring or Connector Issues: Problems with the wiring or connectors related to the pressure sensor can cause performance issues, EVAP System Leak: A leak in the EVAP system can disrupt pressure readings and trigger the P0451 code. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
P0451 2005 Infiniti G35 indicates EVAP Control System Pressure Sensor Performance.
Common causes
Common causes include Faulty Pressure Sensor: The pressure sensor itself may be faulty and not providing accurate readings, Wiring or Connector Issues: Problems with the wiring or connectors related to the pressure sensor can cause performance issues, EVAP System Leak: A leak in the EVAP system can disrupt pressure readings and trigger the P0451 code.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
What is this?
Table of contents Created and updated by William Orellana on Sep 16, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0451 2005 Infiniti G35 Description

The P0451 code for a 2005 Infiniti G35 relates to the EVAP (Evaporative Emission Control) system pressure sensor performance. The EVAP system is designed to prevent fuel vapors from escaping into the atmosphere by capturing and storing them in a charcoal canister until they can be burned in the engine. The pressure sensor in the EVAP system monitors the pressure inside the fuel tank and helps ensure the system is functioning properly.

OBDII Code P0451 2005 Infiniti G35 - EVAP Control System Pressure Sensor Performance
P0451 2005 Infiniti G35 Code - EVAP Control System Pressure Sensor Performance

Common Causes of P0451 2005 Infiniti G35

  1. Faulty Pressure Sensor: The pressure sensor itself may be faulty and not providing accurate readings.
  2. Wiring or Connector Issues: Problems with the wiring or connectors related to the pressure sensor can cause performance issues.
  3. EVAP System Leak: A leak in the EVAP system can disrupt pressure readings and trigger the P0451 code.
  4. Fuel Tank Issues: Problems with the fuel tank, such as a damaged or leaking tank, can also lead to this code.

Symptoms of P0451 2005 Infiniti G35

  1. Check Engine Light: The most common symptom associated with the P0451 code is the illumination of the check engine light on the vehicle's dashboard.
  2. Decreased Fuel Efficiency: A malfunctioning EVAP system pressure sensor can lead to decreased fuel efficiency as the engine may not be able to optimize fuel usage.
  3. Failed Emissions Test: If the EVAP system is not functioning properly, the vehicle may fail emissions tests due to increased emissions.
  4. Rough Idle: In some cases, a malfunctioning EVAP system can cause the engine to idle roughly or inconsistently.
  5. Strong Fuel Odor: A leak in the EVAP system can sometimes result in a strong fuel odor around the vehicle.

How to Fix P0451 2005 Infiniti G35

  1. Diagnose the Issue: Use a diagnostic tool to read the code and determine the specific cause of the P0451 code.
  2. Inspect Pressure Sensor: Check the pressure sensor for any signs of damage or wear and replace if necessary.
  3. Check Wiring and Connectors: Inspect the wiring and connectors related to the pressure sensor for any issues and repair or replace as needed.
  4. Test EVAP System: Conduct a thorough test of the EVAP system to check for leaks and ensure it is functioning properly.
  5. Clear Codes: Once the issue has been repaired, clear the codes and test drive the vehicle to ensure the problem has been resolved.

Cost to Fix P0451 2005 Infiniti G35

The cost of repairing a P0451 code on a 2005 Infiniti G35 can vary depending on the specific cause of the issue and the labor rates in your area. In general, the cost of replacing a faulty pressure sensor can range from $100 to $300, while addressing wiring or connector issues may cost between $50 and $150. Testing and diagnosing the EVAP system can add additional costs, so the total repair bill could range from $200 to $500 or more.

When is the Code Detected?

An improper voltage signal from EVAP control system pressure sensor is sent to Engine Control Module (ECM).

Need more information about the P0451 2005 Infiniti G35 code?

Need more information on how to fix the P0451 2005 Infiniti G35 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0451 2005 Infiniti G35 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0451 2005 Infiniti G35 Code

What does OBDII code P0451 mean for a 2005 Infiniti G35?

Code P0451 indicates an issue with the EVAP Control System Pressure Sensor, meaning the sensor is not providing accurate pressure readings to the engine control module (ECM).

What are the symptoms of code P0451 in a 2005 Infiniti G35?

Common symptoms include the check engine light turning on, a possible fuel smell near the vehicle, and decreased fuel efficiency.

What causes the P0451 code on a 2005 Infiniti G35?

Common causes include a faulty EVAP pressure sensor, damaged wiring or connectors, a clogged EVAP vent valve, or a malfunctioning ECM.

Can I drive my 2005 Infiniti G35 with a P0451 code?

While the car may still drive, it's not recommended to ignore the issue as it can affect emissions performance and could lead to further complications.

How do I fix the P0451 code on a 2005 Infiniti G35?

Repairs typically involve checking and replacing the EVAP pressure sensor, inspecting and repairing wiring or connectors, or cleaning/replacing the EVAP vent valve.

How do I diagnose the P0451 code in a 2005 Infiniti G35?

Start by using an OBDII scanner to confirm the code, then inspect the EVAP pressure sensor, wiring, connectors, and vent valve for damage or blockages.

Can a loose gas cap cause the P0451 code?

While a loose gas cap is more likely to trigger codes like P0455 or P0457, it’s worth checking as it can sometimes impact the EVAP system’s functionality.

How much does it cost to repair the P0451 code on a 2005 Infiniti G35?

The cost varies, but replacing the EVAP pressure sensor typically ranges from $150 to $300, depending on labor rates and part prices.

Will clearing the P0451 code fix the problem?

Clearing the code may turn off the check engine light temporarily, but the underlying issue must be addressed to prevent the code from returning.

What tools are needed to diagnose and fix the P0451 code?

You’ll need an OBDII scanner, a multimeter for electrical testing, and basic hand tools to inspect and replace EVAP system components.

Discuss the causes and fixes for P0451 2005 Infiniti G35 OBDII Code

Submit a New Comment

Code P0451 2005 Infiniti G35 comments

No comments found for this page.