P0446 Scion Code - EVAP System Vent Control Circuit
Quick Answer
The P0446 Scion code indicates a problem with the EVAP (Evaporative Emission Control System) system vent control circuit. Common causes include Faulty EVAP vent valve, Wiring or electrical issues in the vent control circuit, Charcoal canister clogged or damaged. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0446 Scion indicates EVAP System Vent Control Circuit.
- Common causes
- Common causes include Faulty EVAP vent valve, Wiring or electrical issues in the vent control circuit, Charcoal canister clogged or damaged.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0446 Scion Description
The P0446 Scion code indicates a problem with the EVAP (Evaporative Emission Control System) system vent control circuit. The EVAP system is responsible for capturing and storing fuel vapors to prevent them from escaping into the atmosphere. The vent control circuit specifically controls the flow of fuel vapor from the fuel tank to the charcoal canister.
Common Causes of P0446 Scion
- Faulty EVAP vent valve
- Wiring or electrical issues in the vent control circuit
- Charcoal canister clogged or damaged
- Loose or damaged gas cap
- EVAP system leak
Symptoms of P0446 Scion
- Check Engine light illuminated
- Decreased fuel efficiency
- Strong fuel odor
- Failed emissions test
- Rough idle or stalling
How to Fix P0446 Scion
- Use an OBD-II scanner to confirm the P0446 code and diagnose the specific issue with the EVAP system.
- Inspect the EVAP vent valve, wiring, and connections for any signs of damage or malfunction.
- Test the charcoal canister for clogs or damage and replace if necessary.
- Check the gas cap for proper sealing and replace if loose or damaged.
- Clear the code and perform a test drive to ensure the issue has been resolved.
Cost to Fix P0446 Scion
The cost of repairing a P0446 Scion code can vary depending on the specific cause of the issue. On average, the cost of parts for this repair can range from $100 to $300, with labor costs adding an additional $100 to $200. This brings the total estimated cost to around $200 to $500. However, it's important to note that labor rates and parts prices can vary based on location, vehicle make and model, and the specific repair shop. It's recommended to obtain quotes from local auto repair shops to get a more accurate estimate.
Need more information about the P0446 Scion code?
Need more information on how to fix the P0446 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0446 Scion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0446 Scion Code
1. What does the OBDII code P0446 mean on a Scion?
P0446 indicates a malfunction in the EVAP (Evaporative Emission Control) system's vent control circuit, which helps prevent fuel vapor from escaping into the atmosphere.
2. What are the common symptoms of P0446 on a Scion?
Symptoms may include an illuminated check engine light, a slight fuel odor, or difficulty refueling, but the vehicle may otherwise run normally.
3. What causes the P0446 code to appear on a Scion?
Common causes include a faulty vent control valve, clogged or damaged EVAP hoses, a malfunctioning charcoal canister, or electrical issues such as damaged wiring or a blown fuse.
4. Can a loose gas cap cause the P0446 code on a Scion?
While a loose gas cap is often linked to other EVAP codes, it’s less likely to cause P0446, which is specific to the vent control circuit.
5. How do you diagnose the P0446 code on a Scion?
Diagnosis involves checking the vent control valve for proper operation, inspecting EVAP hoses for blockages or damage, and testing the wiring and connectors for continuity or corrosion.
6. Is it safe to drive a Scion with the P0446 code?
Yes, it’s generally safe to drive, but the issue should be addressed promptly to avoid potential emissions problems or difficulty passing an emissions test.
7. How do you fix the P0446 code on a Scion?
Repairs may include replacing the vent control valve, cleaning or replacing clogged EVAP hoses, repairing damaged wiring, or replacing the charcoal canister.
8. How much does it cost to fix the P0446 code on a Scion?
The cost varies depending on the exact issue, but replacing the vent control valve typically ranges from $150 to $300, including parts and labor.
9. Can the P0446 code clear itself on a Scion?
The code may clear temporarily if the issue is intermittent, but it will likely return until the root cause is repaired.
10. Do I need special tools to fix the P0446 code on a Scion?
Basic tools may suffice for some repairs, but diagnosing the issue accurately may require an OBDII scanner and a multimeter to test components.
Discuss the causes and fixes for P0446 Scion OBDII Code
-
The fuel cap has come off of the connecting piece so when you get gas you have to hold the cap in your hand. Would that trigger this code?
-
No, but if you din't fully tight the fuel cap, it could trigger the code.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.