P0446 Chrysler Code - EVAP Purge Solenoid Stuck Open
Quick Answer
The P0446 code for Chrysler vehicles indicates a problem with the EVAP (Evaporative Emission Control) system, specifically that the EVAP purge solenoid is stuck open. Common causes include Faulty EVAP purge solenoid, Vacuum leak in the EVAP system, Electrical issues, such as a faulty wiring connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0446 Chrysler indicates EVAP Purge Solenoid Stuck Open.
- Common causes
- Common causes include Faulty EVAP purge solenoid, Vacuum leak in the EVAP system, Electrical issues, such as a faulty wiring connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0446 Chrysler Description
The P0446 code for Chrysler vehicles indicates a problem with the EVAP (Evaporative Emission Control) system, specifically that the EVAP purge solenoid is stuck open. The EVAP system helps to control and capture fuel vapor emissions from the fuel tank and prevent them from being released into the atmosphere. The purge solenoid is responsible for controlling the flow of vapor from the fuel tank to the engine, allowing it to be burned off and reducing emissions.
Common Causes of P0446 Chrysler
- Faulty EVAP purge solenoid
- Vacuum leak in the EVAP system
- Electrical issues, such as a faulty wiring connection
- Carbon buildup or debris blocking the solenoid
- Defective EVAP canister
Symptoms of P0446 Chrysler
- Check Engine Light illuminated on the dashboard
- Decreased fuel efficiency
- Strong fuel odor
- Rough idle or stalling
- Difficulty starting the vehicle
How to Fix P0446 Chrysler
- Diagnose the issue using a scan tool to confirm the P0446 code and identify the specific cause of the problem.
- Inspect the EVAP system components, including the purge solenoid, canister, and hoses, for any signs of damage or blockages.
- Test the purge solenoid for proper operation and replace it if necessary.
- Repair any vacuum leaks in the EVAP system and ensure all connections are secure.
- Clear the diagnostic trouble codes, reset the Check Engine Light, and perform a final test drive to confirm the issue has been resolved.
Cost to Fix P0446 Chrysler
The typical repair costs for addressing a P0446 code on a Chrysler vehicle can vary depending on the specific cause of the issue and the labor rates in your area. On average, you can expect to pay between $150 and $300 for parts and labor to replace the EVAP purge solenoid and address any related issues. It's important to note that diagnostic time and labor rates at auto repair shops can vary, so it's recommended to obtain quotes from local shops to get a more accurate estimate for your particular situation.
When is the Code Detected?
Need more information about the P0446 Chrysler code?
Need more information on how to fix the P0446 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0446 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0446 Chrysler Code
1. What does the OBDII code P0446 mean on a Chrysler?
P0446 indicates a malfunction in the EVAP (Evaporative Emission Control) system, specifically that the purge solenoid is stuck open or there is an issue with the vent control circuit.
2. What are the common symptoms of code P0446 in a Chrysler?
Symptoms may include the check engine light turning on, difficulty starting the engine, a noticeable fuel odor, or reduced fuel efficiency.
3. What causes the P0446 code to appear in a Chrysler vehicle?
Common causes include a stuck or faulty EVAP purge solenoid, damaged or disconnected EVAP hoses, a clogged charcoal canister, or electrical issues such as damaged wiring or a blown fuse.
4. Can I drive my Chrysler with a P0446 code?
While the car may still be drivable, prolonged driving with this code can lead to increased emissions and potential damage to the EVAP system. It's best to address the issue promptly.
5. How do you diagnose a P0446 code in a Chrysler?
Diagnosis typically involves inspecting the EVAP system for damaged hoses, testing the purge solenoid for proper operation, checking for clogs in the charcoal canister, and using a scan tool to monitor EVAP system data.
6. How do you fix a P0446 code on a Chrysler?
Possible fixes include replacing the EVAP purge solenoid, repairing or replacing damaged hoses, unclogging or replacing the charcoal canister, or repairing any electrical wiring issues.
7. How much does it cost to repair a P0446 code on a Chrysler?
The repair cost varies depending on the cause, but replacing an EVAP purge solenoid typically costs between $150 and $300, including parts and labor.
8. Can a loose gas cap cause the P0446 code in a Chrysler?
A loose gas cap is less likely to cause this specific code but can trigger other EVAP-related codes. It’s still a good idea to check and tighten the gas cap as part of your diagnosis.
9. What tools are needed to fix a P0446 code in a Chrysler?
Basic tools include a scan tool or OBDII code reader, a multimeter for electrical testing, and standard automotive tools for removing and replacing EVAP components.
10. Will clearing the P0446 code fix the problem permanently?
No, clearing the code will only temporarily turn off the check engine light. The underlying issue must be repaired to prevent the code from returning.
Discuss the causes and fixes for P0446 Chrysler OBDII Code
Code P0446 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.