Engine-Codes.com
Engine-Codes – Hyundai – P0445 Hyundai

P0445 Hyundai Code - EVAP System Purge Control Valve Circuit Shorted

Quick Answer

The P0445 diagnostic trouble code (DTC) for Hyundai vehicles indicates a problem with the EVAP (Evaporative Emission Control) system's purge control valve circuit being shorted. Common causes include Faulty Purge Control Valve: The purge control valve itself may be defective and require replacement, Wiring Issues: Damage or corrosion to the wiring harness connected to the purge control valve can cause a short circuit, Poor Electrical Connection: Loose or poor electrical connections can lead to a short in the purge control valve circuit. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
P0445 Hyundai indicates EVAP System Purge Control Valve Circuit Shorted.
Common causes
Common causes include Faulty Purge Control Valve: The purge control valve itself may be defective and require replacement, Wiring Issues: Damage or corrosion to the wiring harness connected to the purge control valve can cause a short circuit, Poor Electrical Connection: Loose or poor electrical connections can lead to a short in the purge control valve circuit.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
What is this?
Table of contents Created and updated by William Orellana on Sep 06, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0445 Hyundai Description

The P0445 diagnostic trouble code (DTC) for Hyundai vehicles indicates a problem with the EVAP (Evaporative Emission Control) system's purge control valve circuit being shorted. The EVAP system is designed to prevent fuel vapors from escaping into the atmosphere by collecting and storing them in a charcoal canister until they can be burned in the engine. The purge control valve is responsible for regulating the flow of fuel vapors from the canister to the engine for combustion.

OBDII Code P0445 Hyundai - EVAP System Purge Control Valve Circuit Shorted
P0445 Hyundai Code - EVAP System Purge Control Valve Circuit Shorted

Common Causes of P0445 Hyundai

  1. Faulty Purge Control Valve: The purge control valve itself may be defective and require replacement.
  2. Wiring Issues: Damage or corrosion to the wiring harness connected to the purge control valve can cause a short circuit.
  3. Poor Electrical Connection: Loose or poor electrical connections can lead to a short in the purge control valve circuit.
  4. ECM (Engine Control Module) Failure: A malfunctioning ECM can also trigger this code by sending incorrect signals to the purge control valve.
  5. Charcoal Canister Issues: Problems with the charcoal canister or other components of the EVAP system can impact the purge control valve's operation.

Symptoms of P0445 Hyundai

  1. Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the vehicle's dashboard.
  2. Rough Idle: A malfunctioning EVAP system can cause the engine to idle roughly or inconsistently.
  3. Reduced Fuel Efficiency: An improperly functioning purge control valve can lead to increased fuel consumption.
  4. Strong Fuel Smell: A noticeable fuel odor inside or outside the vehicle may indicate a problem with the EVAP system.
  5. Failed Emissions Test: If the EVAP system is not functioning correctly, the vehicle may fail emissions testing.

How to Fix P0445 Hyundai

  1. Diagnose the Issue: Begin by using a diagnostic scanner to retrieve the trouble code and pinpoint the exact cause of the problem.
  2. Inspect Wiring and Connections: Check the wiring harness and connections related to the purge control valve for any damage or corrosion. Repair or replace as necessary.
  3. Test Purge Control Valve: Verify the functionality of the purge control valve by applying power and ground to it directly and observing its operation.
  4. Replace Purge Control Valve: If the valve is found to be faulty, replace it with a new one following manufacturer guidelines.
  5. Clear Codes and Test Drive: After completing the repair, clear the trouble codes from the ECM and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P0445 Hyundai

The cost of repairing a P0445 code on a Hyundai vehicle can vary depending on the specific model and year, as well as the labor rates in your area. On average, the parts cost for a new purge control valve can range from $50 to $150, while labor costs may add another $100 to $200. Therefore, the total repair cost for this issue could range from $150 to $350. Keep in mind that additional diagnostic time and potential related repairs may increase the total cost. It's recommended to seek quotes from local auto repair shops to determine a more accurate estimate based on your vehicle's needs.

When is the Code Detected?

- An excessively high voltage signal is sent to Engine Control Module (ECM) through the valve

Need more information about the P0445 Hyundai code?

Need more information on how to fix the P0445 Hyundai code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0445 Hyundai code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0445 Hyundai Code

No Frequently Asked Questions about P0445 Hyundai Code found.

Discuss the causes and fixes for P0445 Hyundai OBDII Code

Submit a New Comment

Code P0445 Hyundai comments

No comments found for this page.