Engine-Codes.com
Engine-Codes – Nissan – P0445 2013 Nissan Rogue

P0445 2013 Nissan Rogue Code - EVAP Canister Purge Volume Control Solenoid Valve Circuit Shorted

Quick Answer

The P0445 code in a 2013 Nissan Rogue indicates a malfunction in the EVAP (Evaporative Emission Control) system, specifically related to the Canister Purge Volume Control Solenoid Valve Circuit being shorted. Common causes include Damaged wiring or connectors, Faulty Canister Purge Volume Control Solenoid Valve, Blown fuse related to the EVAP system. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
P0445 2013 Nissan Rogue indicates EVAP Canister Purge Volume Control Solenoid Valve Circuit Shorted.
Common causes
Common causes include Damaged wiring or connectors, Faulty Canister Purge Volume Control Solenoid Valve, Blown fuse related to the EVAP system.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
What is this?
Table of contents Created and updated by William Orellana on Sep 12, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0445 2013 Nissan Rogue Description

The P0445 code in a 2013 Nissan Rogue indicates a malfunction in the EVAP (Evaporative Emission Control) system, specifically related to the Canister Purge Volume Control Solenoid Valve Circuit being shorted. The EVAP system is responsible for capturing and storing fuel vapors to prevent them from escaping into the atmosphere. The Canister Purge Volume Control Solenoid Valve is a crucial component that controls the flow of fuel vapors from the charcoal canister to the engine intake manifold for combustion.

OBDII Code P0445 2013 Nissan Rogue - EVAP Canister Purge Volume Control Solenoid Valve Circuit Shorted
P0445 2013 Nissan Rogue Code - EVAP Canister Purge Volume Control Solenoid Valve Circuit Shorted

Common Causes of P0445 2013 Nissan Rogue

  1. Damaged wiring or connectors
  2. Faulty Canister Purge Volume Control Solenoid Valve
  3. Blown fuse related to the EVAP system
  4. Malfunctioning ECM
  5. Environmental factors such as water or debris entering the EVAP system

Symptoms of P0445 2013 Nissan Rogue

  1. Check engine light illuminated on the dashboard
  2. Rough idling or engine stalling
  3. Reduced fuel efficiency
  4. Failed emissions test
  5. Strong fuel odor

How to Fix P0445 2013 Nissan Rogue

  1. Begin by using a scan tool to verify the P0445 code and diagnose the specific cause of the issue.
  2. Inspect the wiring and connectors associated with the Canister Purge Volume Control Solenoid Valve for any damage or corrosion. Repair or replace as necessary.
  3. Test the Canister Purge Volume Control Solenoid Valve for proper operation and replace if faulty.
  4. Check and replace any blown fuses related to the EVAP system.
  5. Clear the code from the ECM memory and perform a test drive to ensure the issue has been resolved.

Cost to Fix P0445 2013 Nissan Rogue

The typical repair costs for addressing a P0445 code in a 2013 Nissan Rogue can range from $100 to $300, depending on the specific cause of the issue and the cost of parts. This estimate includes the cost of a new Canister Purge Volume Control Solenoid Valve, wiring repairs, and labor charges. It's important to note that diagnostic time and labor rates at auto repair shops can vary, so it's advisable to consult with a professional for a more accurate estimate based on your location and vehicle specifics.

What does this mean?

Tech Notes for P0445 2013 Nissan Rogue

It's a very common problem with Nissan vehicles. If the harness is not damage it's very likely that the problem is the canister purge volume control solenoid valve.

When is the Code Detected?

An excessively high voltage signal is sent to Engine Control Module (ECM) through the valve

Need more information about the P0445 2013 Nissan Rogue code?

Need more information on how to fix the P0445 2013 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0445 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0445 2013 Nissan Rogue Code

1. What are the common symptoms of OBDII code P0445 in a 2013 Nissan Rogue?

The common symptoms of code P0445 in a 2013 Nissan Rogue include rough idling, decreased fuel efficiency, and the illumination of the check engine light.

2. What does the OBDII code P0445 indicate in a 2013 Nissan Rogue?

Code P0445 in a 2013 Nissan Rogue indicates a problem with the EVAP Canister Purge Volume Control Solenoid Valve Circuit being shorted.

3. What are the possible causes of OBDII code P0445 in a 2013 Nissan Rogue?

The possible causes of code P0445 in a 2013 Nissan Rogue include a faulty purge volume control solenoid valve, damaged wiring or connectors in the circuit, or a short circuit in the system.

4. How can I diagnose the EVAP Canister Purge Volume Control Solenoid Valve Circuit in a 2013 Nissan Rogue?

To diagnose the EVAP Canister Purge Volume Control Solenoid Valve Circuit in a 2013 Nissan Rogue, you can use an OBDII scanner to read the trouble codes, visually inspect the wiring and connectors, and test the solenoid valve for proper functionality.

5. Can I drive my 2013 Nissan Rogue with OBDII code P0445?

While it may be possible to drive your 2013 Nissan Rogue with code P0445, it is recommended to address the issue promptly to prevent further damage to the EVAP system and ensure optimal vehicle performance.

6. How do I repair OBDII code P0445 in a 2013 Nissan Rogue?

To repair code P0445 in a 2013 Nissan Rogue, you may need to replace the EVAP Canister Purge Volume Control Solenoid Valve, repair any damaged wiring or connectors, and clear the trouble codes with an OBDII scanner.

7. Is it necessary to reset the check engine light after fixing OBDII code P0445 in a 2013 Nissan Rogue?

Yes, it is important to reset the check engine light using an OBDII scanner after fixing code P0445 in a 2013 Nissan Rogue to ensure the issue has been resolved and to monitor for any new problems.

8. Can a DIY enthusiast fix OBDII code P0445 in a 2013 Nissan Rogue?

Depending on the level of mechanical expertise, a DIY enthusiast may be able to fix code P0445 in a 2013 Nissan Rogue by following repair guides, consulting the vehicle's manual, and using the necessary tools.

9. How much does it cost to repair OBDII code P0445 in a 2013 Nissan Rogue?

The cost to repair code P0445 in a 2013 Nissan Rogue can vary depending on the cause of the issue, the cost of parts and labor, and whether the repair is done at a dealership or an independent mechanic. It is advisable to obtain quotes from different sources.

10. Can OBDII code P0445 in a 2013 Nissan Rogue cause emissions test failure?

Yes, code P0445 in a 2013 Nissan Rogue can cause emissions test failure as it indicates a problem with the EVAP system, which is crucial for controlling vehicle emissions. It is recommended to address the issue before undergoing an emissions test.

Discuss the causes and fixes for P0445 2013 Nissan Rogue OBDII Code

Submit a New Comment

Code P0445 2013 Nissan Rogue comments

No comments found for this page.