P0444 2013 Nissan Rogue Code - EVAP Canister Purge Volume Control Solenoid Valve Circuit Open
Quick Answer
The P0444 diagnostic trouble code (DTC) for a 2013 Nissan Rogue indicates that there is an open circuit in the EVAP (Evaporative Emission Control System) Canister Purge Volume Control Solenoid Valve. Common causes include Faulty Purge Volume Control Solenoid Valve: The most common cause of this code is a malfunctioning EVAP purge valve, Wiring Issues: Damaged or corroded wiring connections can also lead to an open circuit in the solenoid valve, ECM (Engine Control Module) Failure: A malfunctioning ECM can also trigger this code. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0444 2013 Nissan Rogue indicates EVAP Canister Purge Volume Control Solenoid Valve Circuit Open.
- Common causes
- Common causes include Faulty Purge Volume Control Solenoid Valve: The most common cause of this code is a malfunctioning EVAP purge valve, Wiring Issues: Damaged or corroded wiring connections can also lead to an open circuit in the solenoid valve, ECM (Engine Control Module) Failure: A malfunctioning ECM can also trigger this code.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0444 2013 Nissan Rogue Description
The P0444 diagnostic trouble code (DTC) for a 2013 Nissan Rogue indicates that there is an open circuit in the EVAP (Evaporative Emission Control System) Canister Purge Volume Control Solenoid Valve. This valve is responsible for controlling the flow of fuel vapor from the charcoal canister to the engine intake manifold. When the solenoid valve is open, it allows the fuel vapor to be purged into the engine and burned, reducing emissions.
Common Causes of P0444 2013 Nissan Rogue
- Faulty Purge Volume Control Solenoid Valve: The most common cause of this code is a malfunctioning EVAP purge valve.
- Wiring Issues: Damaged or corroded wiring connections can also lead to an open circuit in the solenoid valve.
- ECM (Engine Control Module) Failure: A malfunctioning ECM can also trigger this code.
- Vacuum Leaks: Any leaks in the vacuum system can affect the operation of the EVAP system.
- Charcoal Canister Issues: Problems with the charcoal canister can also impact the functioning of the EVAP system.
Symptoms of P0444 2013 Nissan Rogue
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the dashboard.
- Rough Idle: A malfunctioning EVAP purge valve can cause the engine to idle roughly or inconsistently.
- Decreased Fuel Efficiency: Since the fuel vapor is not being properly purged into the engine, it can lead to decreased fuel efficiency.
- Failed Emissions Test: If the EVAP system is not functioning correctly, it can cause the vehicle to fail emissions testing.
How to Fix P0444 2013 Nissan Rogue
- Diagnose the Issue: Use a scan tool to retrieve the DTC and perform a visual inspection of the EVAP system components.
- Test the Purge Valve: Test the EVAP purge valve to determine if it is functioning properly.
- Check Wiring: Inspect the wiring connections for any damage or corrosion and repair as necessary.
- Replace Purge Valve: If the purge valve is faulty, replace it with a new one.
- Clear Codes: Clear the DTC and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0444 2013 Nissan Rogue
The cost of repairing a P0444 code on a 2013 Nissan Rogue can vary depending on the specific cause of the issue. On average, the cost of replacing the EVAP purge valve can range from $100 to $200, including parts and labor. Additional costs may be incurred if there are wiring issues or other components that need to be replaced. It's important to note that labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate.
When is the Code Detected?
Need more information about the P0444 2013 Nissan Rogue code?
Need more information on how to fix the P0444 2013 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0444 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0444 2013 Nissan Rogue Code
1. What does the OBDII code P0444 on a 2013 Nissan Rogue indicate?
The code P0444 for a 2013 Nissan Rogue specifically points to a fault in the EVAP Canister Purge Volume Control Solenoid Valve Circuit, indicating an open circuit issue.
2. What are the common symptoms of a P0444 code on a 2013 Nissan Rogue?
Common symptoms of a P0444 code in a 2013 Nissan Rogue may include rough idling, decreased fuel efficiency, and an illuminated check engine light on the dashboard.
3. What are the potential causes of a P0444 code on a 2013 Nissan Rogue?
Possible causes of a P0444 code on a 2013 Nissan Rogue include a faulty EVAP canister purge volume control solenoid valve, damaged wiring or connectors in the circuit, or a malfunctioning PCM (Powertrain Control Module).
4. How can I diagnose a P0444 code on my 2013 Nissan Rogue?
Diagnosing a P0444 code on a 2013 Nissan Rogue involves checking the EVAP canister purge volume control solenoid valve for proper operation, inspecting the wiring and connectors for damage, and using a diagnostic scan tool to read the code and clear it for testing.
5. Can I continue driving my 2013 Nissan Rogue with a P0444 code?
While it may be possible to drive the vehicle with a P0444 code, it is recommended to address the issue promptly to prevent potential damage to other components and ensure optimal performance and fuel efficiency.
6. How can I repair a P0444 code on a 2013 Nissan Rogue?
Repairing a P0444 code on a 2013 Nissan Rogue typically involves replacing the faulty EVAP canister purge volume control solenoid valve, repairing any damaged wiring or connectors, and clearing the code with a diagnostic scan tool.
7. Is it possible to reset the P0444 code on a 2013 Nissan Rogue without fixing the issue?
Resetting the P0444 code without addressing the underlying problem may temporarily turn off the check engine light, but the code is likely to return if the root cause, such as a faulty solenoid valve, is not repaired.
8. How much does it cost to fix a P0444 code on a 2013 Nissan Rogue?
The cost of fixing a P0444 code on a 2013 Nissan Rogue can vary depending on the cause of the issue, but it may involve part replacement, labor costs, and potential diagnostic fees from a mechanic or dealership.
9. Are there any DIY repair tips for a P0444 code on a 2013 Nissan Rogue?
If you have the necessary tools and automotive experience, you may be able to replace the EVAP canister purge volume control solenoid valve yourself by following a repair manual or online tutorials specific to the 2013 Nissan Rogue.
10. How can I prevent a P0444 code from recurring on my 2013 Nissan Rogue?
To help prevent a P0444 code from coming back on your 2013 Nissan Rogue, it's essential to perform regular maintenance checks, address any fuel system issues promptly, and ensure all components related to the EVAP system are in good condition.
Discuss the causes and fixes for P0444 2013 Nissan Rogue OBDII Code
Code P0444 2013 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.