P0444 2012 Nissan Rogue Code - EVAP Canister Purge Volume Control Solenoid Valve Circuit Open
Quick Answer
The P0444 code on a 2012 Nissan Rogue indicates a problem with the EVAP (Evaporative Emission Control) system, specifically with the Canister Purge Volume Control Solenoid Valve circuit being open. Common causes include Faulty Canister Purge Volume Control Solenoid Valve: The valve itself may be malfunctioning and not responding to electrical signals properly, Wiring Issues: Corrosion, damage, or loose connections in the wiring harness connected to the solenoid valve can cause an open circuit, PCM Malfunction: A problem with the Powertrain Control Module (PCM) can prevent it from sending the correct signals to the solenoid valve. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0444 2012 Nissan Rogue indicates EVAP Canister Purge Volume Control Solenoid Valve Circuit Open.
- Common causes
- Common causes include Faulty Canister Purge Volume Control Solenoid Valve: The valve itself may be malfunctioning and not responding to electrical signals properly, Wiring Issues: Corrosion, damage, or loose connections in the wiring harness connected to the solenoid valve can cause an open circuit, PCM Malfunction: A problem with the Powertrain Control Module (PCM) can prevent it from sending the correct signals to the solenoid valve.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0444 2012 Nissan Rogue Description
The P0444 code on a 2012 Nissan Rogue indicates a problem with the EVAP (Evaporative Emission Control) system, specifically with the Canister Purge Volume Control Solenoid Valve circuit being open. The EVAP system is responsible for capturing and storing fuel vapors from the fuel tank to prevent them from escaping into the atmosphere. The Canister Purge Volume Control Solenoid Valve is a crucial component of this system, as it controls the flow of fuel vapor from the charcoal canister to the engine intake manifold for combustion.
Common Causes of P0444 2012 Nissan Rogue
- Faulty Canister Purge Volume Control Solenoid Valve: The valve itself may be malfunctioning and not responding to electrical signals properly.
- Wiring Issues: Corrosion, damage, or loose connections in the wiring harness connected to the solenoid valve can cause an open circuit.
- PCM Malfunction: A problem with the Powertrain Control Module (PCM) can prevent it from sending the correct signals to the solenoid valve.
- Vacuum Leak: A leak in the EVAP system can disrupt the proper functioning of the Canister Purge Volume Control Solenoid Valve.
Symptoms of P0444 2012 Nissan Rogue
- Check Engine Light: The most common symptom associated with the P0444 code is the illumination of the check engine light on the vehicle's dashboard.
- Rough Idle: A faulty Canister Purge Volume Control Solenoid Valve can cause the engine to idle roughly or inconsistently.
- Decreased Fuel Efficiency: Since the EVAP system plays a role in fuel vapor management, a problem with the Canister Purge Volume Control Solenoid Valve can lead to decreased fuel efficiency.
- Failed Emissions Test: If the P0444 code is not addressed, it can cause the vehicle to fail emissions tests due to increased emissions.
How to Fix P0444 2012 Nissan Rogue
- Diagnose the Issue: Use a scan tool to read the code and pinpoint the exact cause of the problem, whether it's a faulty valve, wiring issue, PCM malfunction, or vacuum leak.
- Inspect Wiring: Check the wiring harness connected to the Canister Purge Volume Control Solenoid Valve for any signs of damage, corrosion, or loose connections. Repair or replace as needed.
- Test Solenoid Valve: Test the solenoid valve to ensure it is functioning correctly. Replace if necessary.
- Check EVAP System: Inspect the entire EVAP system for any leaks or other issues that could be affecting the Canister Purge Volume Control Solenoid Valve.
- Clear Codes: After making the necessary repairs, clear the diagnostic trouble codes and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0444 2012 Nissan Rogue
The typical repair costs for addressing a P0444 code on a 2012 Nissan Rogue can vary depending on the specific cause of the issue. In general, replacing a Canister Purge Volume Control Solenoid Valve can cost between $100 and $200 for the part, with additional labor costs ranging from $50 to $150. If the issue is related to wiring repairs or a PCM malfunction, the total repair costs could be higher. It's important to note that diagnosis time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate.
When is the Code Detected?
Need more information about the P0444 2012 Nissan Rogue code?
Need more information on how to fix the P0444 2012 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0444 2012 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0444 2012 Nissan Rogue Code
1. What does OBDII code P0444 on a 2012 Nissan Rogue indicate?
The code P0444 in a 2012 Nissan Rogue relates to the EVAP (Evaporative Emission Control System) Canister Purge Volume Control Solenoid Valve Circuit Open.
2. What are the common symptoms of a P0444 code in a 2012 Nissan Rogue?
Common symptoms of a P0444 code may include rough idling, poor fuel economy, a noticeable fuel odor, and the illumination of the check engine light on the dashboard.
3. What are the possible causes of the EVAP Canister Purge Volume Control Solenoid Valve Circuit Open code on a 2012 Nissan Rogue?
Potential causes of the P0444 code in a 2012 Nissan Rogue include a faulty purge control valve, damaged wiring or connectors in the purge valve circuit, or a malfunctioning ECM (Engine Control Module).
4. How can I diagnose the issue causing the P0444 code on my 2012 Nissan Rogue?
To diagnose the problem, you can start by visually inspecting the wiring and connectors in the purge valve circuit. You may also need to test the purge valve itself and check for any signs of damage or malfunction.
5. Can I continue driving my 2012 Nissan Rogue with a P0444 code?
It is generally not recommended to continue driving your Nissan Rogue with a P0444 code as it can lead to further damage to the vehicle's emission control system and potentially affect its performance.
6. How can I repair the EVAP Canister Purge Volume Control Solenoid Valve Circuit Open issue in my 2012 Nissan Rogue?
Repairing the P0444 code may involve replacing the faulty purge control valve, repairing or replacing damaged wiring or connectors, or resetting the ECM. It is advisable to consult a professional mechanic for a proper diagnosis and repair.
7. Are there any DIY tips for fixing the P0444 code in a 2012 Nissan Rogue?
While some basic troubleshooting like checking for loose connections or damaged wires can be done by DIY enthusiasts, complex repairs involving component replacements or ECM reprogramming are best left to experienced mechanics.
8. How much does it cost to fix the P0444 code in a 2012 Nissan Rogue?
The cost of fixing a P0444 code on a 2012 Nissan Rogue can vary depending on the root cause of the issue, the cost of parts needed for repair, and labor charges from the mechanic. It's recommended to get multiple quotes from repair shops.
9. Will resetting the check engine light resolve the P0444 code in my 2012 Nissan Rogue?
Simply resetting the check engine light may temporarily clear the code, but it will not fix the underlying issue causing the P0444 code. It's crucial to diagnose and repair the problem to prevent further complications.
10. How often does the EVAP Canister Purge Volume Control Solenoid Valve Circuit Open code occur in 2012 Nissan Rogues?
The occurrence of the P0444 code in 2012 Nissan Rogues can vary, but it is a relatively common issue related to the vehicle's emission control system. Regular maintenance and prompt attention to any warning lights can help prevent such problems.
Discuss the causes and fixes for P0444 2012 Nissan Rogue OBDII Code
Code P0444 2012 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.