P0444 2004 Nissan Maxima Code - EVAP Canister Purge Volume Control Solenoid Valve Circuit Open
Quick Answer
The P0444 code in a 2004 Nissan Maxima indicates a problem with the EVAP (Evaporative Emission Control System) Canister Purge Volume Control Solenoid Valve Circuit being open. Common causes include Faulty EVAP canister purge volume control solenoid valve, Wiring or connector issues in the solenoid valve circuit, Corrosion or damage to the EVAP system components. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0444 2004 Nissan Maxima indicates EVAP Canister Purge Volume Control Solenoid Valve Circuit Open.
- Common causes
- Common causes include Faulty EVAP canister purge volume control solenoid valve, Wiring or connector issues in the solenoid valve circuit, Corrosion or damage to the EVAP system components.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0444 2004 Nissan Maxima Description
The P0444 code in a 2004 Nissan Maxima indicates a problem with the EVAP (Evaporative Emission Control System) Canister Purge Volume Control Solenoid Valve Circuit being open. The EVAP system is responsible for capturing and storing fuel vapors to prevent them from being released into the atmosphere. The purge volume control solenoid valve regulates the flow of fuel vapors from the charcoal canister to the engine intake manifold for combustion.
Common Causes of P0444 2004 Nissan Maxima
- Faulty EVAP canister purge volume control solenoid valve
- Wiring or connector issues in the solenoid valve circuit
- Corrosion or damage to the EVAP system components
- Vacuum leaks in the EVAP system
- PCM (Powertrain Control Module) failure
Symptoms of P0444 2004 Nissan Maxima
- Check Engine Light illuminated
- Rough idle or stalling
- Decreased fuel efficiency
- Strong fuel odor
- Difficulty starting the vehicle
How to Fix P0444 2004 Nissan Maxima
- Diagnose the issue using a scan tool to confirm the P0444 code
- Inspect the wiring and connectors for any damage or corrosion
- Test the EVAP canister purge volume control solenoid valve for proper operation
- Replace the solenoid valve if faulty
- Clear the code and perform a test drive to ensure the issue is resolved
Cost to Fix P0444 2004 Nissan Maxima
The cost of repairing a P0444 code in a 2004 Nissan Maxima can vary depending on the specific cause of the issue. Generally, the replacement of the EVAP canister purge volume control solenoid valve can range from $100 to $200 for the part. Labor costs can add an additional $100 to $200, bringing the total repair cost to around $200 to $400. Keep in mind that diagnostic time and labor rates can vary, so it's recommended to check with local auto repair shops for a more accurate estimate.
When is the Code Detected?
Need more information about the P0444 2004 Nissan Maxima code?
Need more information on how to fix the P0444 2004 Nissan Maxima code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0444 2004 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0444 2004 Nissan Maxima Code
1. What does the OBDII code P0444 mean on a 2004 Nissan Maxima?
Code P0444 indicates an "EVAP Canister Purge Volume Control Solenoid Valve Circuit Open," meaning there is an electrical issue with the purge valve circuit in the EVAP system.
2. What are the symptoms of a P0444 code on a 2004 Nissan Maxima?
Common symptoms include a lit check engine light, a possible fuel smell, reduced fuel efficiency, and in some cases, difficulty starting the vehicle.
3. What causes the P0444 code on a 2004 Nissan Maxima?
The most common causes are a damaged or disconnected EVAP purge solenoid wiring harness, a faulty purge solenoid, corroded electrical connectors, or a blown fuse.
4. Can I drive my 2004 Nissan Maxima with a P0444 code?
Yes, you can drive with this code, but it is not recommended for extended periods as it can lead to increased emissions and potential fuel system issues.
5. How do I diagnose the P0444 code on a 2004 Nissan Maxima?
Start by inspecting the wiring and connectors for the EVAP purge solenoid. Check for loose connections, corrosion, or damaged wires. Use a multimeter to test the solenoid’s resistance.
6. How do I fix the P0444 code on a 2004 Nissan Maxima?
Repairs may include reconnecting or replacing damaged wiring, cleaning corroded connectors, replacing the EVAP purge control solenoid, or replacing a blown fuse.
7. Where is the EVAP Canister Purge Volume Control Solenoid located on a 2004 Nissan Maxima?
The purge solenoid is typically located near the engine, often mounted on or near the intake manifold.
8. What tools do I need to fix a P0444 code on a 2004 Nissan Maxima?
You’ll need a multimeter, basic hand tools, electrical contact cleaner, and possibly a replacement purge solenoid valve.
9. Will a P0444 code cause my vehicle to fail an emissions test?
Yes, the P0444 code indicates an EVAP system issue, which can cause your car to fail an emissions test due to increased hydrocarbon emissions.
10. How much does it cost to repair a P0444 code on a 2004 Nissan Maxima?
The cost can vary, but replacing the EVAP purge solenoid typically ranges from $50–$150 for parts, plus labor costs if done by a mechanic.
Discuss the causes and fixes for P0444 2004 Nissan Maxima OBDII Code
Code P0444 2004 Nissan Maxima comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.