Engine-CodesNissan – P0444 2004 Nissan Altima Sedan

P0444 2004 Nissan Altima Sedan Code - EVAP Canister Purge Volume Control Solenoid Valve Circuit Open

Quick Answer

The P0444 code on a 2004 Nissan Altima Sedan indicates a problem with the EVAP (Evaporative Emission Control System) Canister Purge Volume Control Solenoid Valve Circuit being open. Common causes include Faulty Canister Purge Volume Control Solenoid Valve: The valve itself may be malfunctioning, causing the circuit to remain open, Wiring Issues: Damaged or corroded wiring connections can disrupt the electrical signal to the valve, ECM Malfunction: A problem with the engine control module (ECM) can prevent it from properly controlling the valve. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
P0444 2004 Nissan Altima Sedan indicates EVAP Canister Purge Volume Control Solenoid Valve Circuit Open.
Common causes
Common causes include Faulty Canister Purge Volume Control Solenoid Valve: The valve itself may be malfunctioning, causing the circuit to remain open, Wiring Issues: Damaged or corroded wiring connections can disrupt the electrical signal to the valve, ECM Malfunction: A problem with the engine control module (ECM) can prevent it from properly controlling the valve.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Table of contents Created and updated by William Orellana on Sep 15, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0444 2004 Nissan Altima Sedan Description

The P0444 code on a 2004 Nissan Altima Sedan indicates a problem with the EVAP (Evaporative Emission Control System) Canister Purge Volume Control Solenoid Valve Circuit being open. The EVAP system is responsible for capturing and storing fuel vapors to prevent them from escaping into the atmosphere. The Canister Purge Volume Control Solenoid Valve regulates the flow of fuel vapors from the charcoal canister to the engine for combustion.

OBDII Code P0444 2004 Nissan Altima Sedan - EVAP Canister Purge Volume Control Solenoid Valve Circuit Open
P0444 2004 Nissan Altima Sedan Code - EVAP Canister Purge Volume Control Solenoid Valve Circuit Open

Common Causes of P0444 2004 Nissan Altima Sedan

  1. Faulty Canister Purge Volume Control Solenoid Valve: The valve itself may be malfunctioning, causing the circuit to remain open.
  2. Wiring Issues: Damaged or corroded wiring connections can disrupt the electrical signal to the valve.
  3. ECM Malfunction: A problem with the engine control module (ECM) can prevent it from properly controlling the valve.
  4. Vacuum Leaks: Any leaks in the EVAP system can affect the operation of the Canister Purge Volume Control Solenoid Valve.
  5. Charcoal Canister Issues: Problems with the charcoal canister can also impact the functioning of the valve.

Symptoms of P0444 2004 Nissan Altima Sedan

  1. Check Engine Light: The most common symptom associated with the P0444 code is the illumination of the check engine light on the dashboard.
  2. Rough Idle: The vehicle may experience a rough or unstable idle when the Canister Purge Volume Control Solenoid Valve circuit is open.
  3. Decreased Fuel Efficiency: A decrease in fuel efficiency may be noticed due to improper fuel vapor flow.
  4. Hissing Noise: A hissing noise coming from the EVAP system can indicate a problem with the Canister Purge Volume Control Solenoid Valve.
  5. Failed Emissions Test: If the issue is not addressed, the vehicle may fail emissions tests due to increased emissions.

How to Fix P0444 2004 Nissan Altima Sedan

  1. Diagnose the Issue: Use a scan tool to read the code and determine the exact cause of the problem.
  2. Inspect Wiring and Connections: Check the wiring harness and connections for any damage or corrosion, and repair or replace as needed.
  3. Test Canister Purge Volume Control Solenoid Valve: Test the valve to ensure it is functioning properly, and replace if necessary.
  4. Check Charcoal Canister: Inspect the charcoal canister for any damage or leaks that may be affecting the EVAP system.
  5. Clear Codes and Test Drive: Clear the diagnostic trouble codes from the ECM, and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P0444 2004 Nissan Altima Sedan

The cost of repairing a P0444 code on a 2004 Nissan Altima Sedan can vary depending on the specific cause of the issue. In general, the cost of parts for replacing the Canister Purge Volume Control Solenoid Valve can range from $50 to $200. Labor costs at auto repair shops typically range from $80 to $150 per hour. The total cost of repairs, including parts and labor, can range from $150 to $500. It's important to note that these are rough estimates, and actual costs may vary based on the location, shop rates, and any additional repairs that may be needed.

Tech Notes for P0444 2004 Nissan Altima Sedan

There is a factory service bulletin for the 2004 Nissan Altima:

2004 Nissan Altima Factory Service Bulletin OBDII Code P0444

When is the Code Detected?

An excessively low voltage signal is sent to ECM through the valve

Need more information about the P0444 2004 Nissan Altima Sedan code?

Need more information on how to fix the P0444 2004 Nissan Altima Sedan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0444 2004 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0444 2004 Nissan Altima Sedan Code

1. What are common symptoms of OBDII code P0444 in a 2004 Nissan Altima Sedan?

- Common symptoms include the Check Engine light illuminating on the dashboard, rough idling, decreased fuel efficiency, and potential difficulty starting the vehicle.

2. What does the OBDII code P0444 on a 2004 Nissan Altima Sedan indicate?

- OBDII code P0444 indicates a problem with the EVAP Canister Purge Volume Control Solenoid Valve Circuit being open.

3. What are possible causes of the EVAP Canister Purge Volume Control Solenoid Valve Circuit being open in a 2004 Nissan Altima Sedan?

- Possible causes include a faulty purge volume control solenoid valve, damaged wiring or connectors in the circuit, or a malfunctioning ECM (Engine Control Module).

4. How can I diagnose the issue causing OBDII code P0444 in my 2004 Nissan Altima Sedan?

- Diagnosis involves checking the purge volume control solenoid valve for proper function, inspecting the wiring and connectors for any damage, and using a diagnostic tool to scan for ECM errors.

5. Can I continue driving my 2004 Nissan Altima Sedan with OBDII code P0444?

- It is generally not recommended to continue driving with this code present, as it can lead to more severe issues over time and may affect the vehicle's performance.

6. How can I repair the EVAP Canister Purge Volume Control Solenoid Valve Circuit issue in my 2004 Nissan Altima Sedan?

- Repair may involve replacing the faulty purge volume control solenoid valve, repairing any damaged wiring or connectors, or resetting the ECM after fixing the issue.

7. Is it possible to clear the OBDII code P0444 in a 2004 Nissan Altima Sedan without fixing the underlying issue?

- Clearing the code without addressing the root cause is not recommended, as the problem will likely reoccur, and unresolved issues can lead to further damage to the vehicle.

8. Are there any DIY tips for troubleshooting OBDII code P0444 in a 2004 Nissan Altima Sedan?

- DIY tips include checking for loose or damaged wiring, testing the purge volume control solenoid valve for proper function, and ensuring all connections are secure.

9. How much does it typically cost to repair OBDII code P0444 in a 2004 Nissan Altima Sedan at a mechanic or dealership?

- Repair costs can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor at a mechanic or dealership.

10. Can I prevent OBDII code P0444 from recurring in my 2004 Nissan Altima Sedan?

- Regular maintenance, such as checking and replacing the EVAP system components as needed, can help prevent the recurrence of OBDII code P0444 in your Nissan Altima Sedan.

Discuss the causes and fixes for P0444 2004 Nissan Altima Sedan OBDII Code

Code P0444 2004 Nissan Altima Sedan comments

No comments found for this page.