P0443 2012 Nissan Rogue Code - EVAP Canister Purge Volume Control Solenoid Valve
Quick Answer
The P0443 code in a 2012 Nissan Rogue indicates a problem with the EVAP (Evaporative Emission Control) system, specifically the Canister Purge Volume Control Solenoid Valve. Common causes include Faulty Solenoid Valve: The most common cause of a P0443 code is a faulty EVAP Canister Purge Volume Control Solenoid Valve, Damaged Wiring: Wiring that is frayed, corroded, or otherwise damaged can prevent the solenoid valve from functioning properly, Poor Connection: A loose or poor connection to the solenoid valve can also trigger the P0443 code. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0443 2012 Nissan Rogue indicates EVAP Canister Purge Volume Control Solenoid Valve.
- Common causes
- Common causes include Faulty Solenoid Valve: The most common cause of a P0443 code is a faulty EVAP Canister Purge Volume Control Solenoid Valve, Damaged Wiring: Wiring that is frayed, corroded, or otherwise damaged can prevent the solenoid valve from functioning properly, Poor Connection: A loose or poor connection to the solenoid valve can also trigger the P0443 code.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0443 2012 Nissan Rogue Description
The P0443 code in a 2012 Nissan Rogue indicates a problem with the EVAP (Evaporative Emission Control) system, specifically the Canister Purge Volume Control Solenoid Valve. This valve is responsible for controlling the flow of fuel vapors from the charcoal canister to the engine intake manifold. When the engine is running, the EVAP system ensures that fuel vapors are captured and burned, reducing harmful emissions.
Common Causes of P0443 2012 Nissan Rogue
- Faulty Solenoid Valve: The most common cause of a P0443 code is a faulty EVAP Canister Purge Volume Control Solenoid Valve.
- Damaged Wiring: Wiring that is frayed, corroded, or otherwise damaged can prevent the solenoid valve from functioning properly.
- Poor Connection: A loose or poor connection to the solenoid valve can also trigger the P0443 code.
- Clogged Charcoal Canister: A clogged charcoal canister can disrupt the flow of fuel vapors, leading to issues with the EVAP system.
- Vacuum Leaks: Any vacuum leaks in the EVAP system can cause the solenoid valve to malfunction, triggering the P0443 code.
Symptoms of P0443 2012 Nissan Rogue
- Check Engine Light: The most common symptom of a P0443 code is the illumination of the check engine light on the dashboard.
- Rough Idle: A faulty EVAP Canister Purge Volume Control Solenoid Valve can cause rough idling or stalling when the vehicle is at a stop.
- Decreased Fuel Efficiency: A malfunctioning EVAP system can lead to decreased fuel efficiency as fuel vapors are not properly controlled.
- Strong Fuel Odor: If the EVAP system is not functioning correctly, there may be a noticeable fuel odor around the vehicle.
- Failed Emissions Test: A P0443 code can result in a failed emissions test due to increased emissions output.
How to Fix P0443 2012 Nissan Rogue
- Diagnose the Issue: Use a scan tool to retrieve the P0443 code and perform further diagnostics to determine the exact cause of the problem.
- Inspect Wiring and Connections: Check the wiring harness and connections to the EVAP Canister Purge Volume Control Solenoid Valve for any damage or issues.
- Test Solenoid Valve: Test the solenoid valve to ensure it is functioning correctly. Replace if necessary.
- Check Charcoal Canister: Inspect the charcoal canister for any clogs or damage that could be affecting the EVAP system.
- Clear Codes and Test Drive: Clear the P0443 code from the vehicle's computer after repairs are made, then test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0443 2012 Nissan Rogue
The typical repair costs for addressing a P0443 code in a 2012 Nissan Rogue can range from $150 to $300, including parts and labor. It's important to note that actual costs can vary depending on the specific diagnosis time, labor rates, and any additional parts needed. Rates at auto repair shops can range from $80 to $150 per hour, with higher rates in metropolitan areas or at dealerships and lower rates at independent shops. It's recommended to obtain estimates from local shops for a more accurate cost assessment.
Tech Notes for P0443 2012 Nissan Rogue
Need more information about the P0443 2012 Nissan Rogue code?
Need more information on how to fix the P0443 2012 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0443 2012 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0443 2012 Nissan Rogue Code
1. What does OBDII code P0443 on a 2012 Nissan Rogue indicate?
The OBDII code P0443 on a 2012 Nissan Rogue refers to a problem with the EVAP Canister Purge Volume Control Solenoid Valve.
2. What are the common symptoms of a P0443 code on a 2012 Nissan Rogue?
Common symptoms of a P0443 code include rough idling, decreased fuel efficiency, and the illumination of the check engine light on the dashboard.
3. What are the possible causes of a P0443 code on a 2012 Nissan Rogue?
Possible causes of a P0443 code include a faulty EVAP canister purge volume control solenoid valve, damaged wiring or connectors, or a problem with the EVAP system itself.
4. How can I diagnose a P0443 code on my 2012 Nissan Rogue?
To diagnose a P0443 code, you can use an OBDII scanner to retrieve the code and then inspect the EVAP canister purge volume control solenoid valve, wiring, and connectors for any visible damage.
5. Can I continue driving my 2012 Nissan Rogue with a P0443 code?
While you may be able to drive your vehicle with a P0443 code, it is recommended to address the issue promptly to prevent potential damage to other components and ensure optimal performance.
6. How can I repair a P0443 code on my 2012 Nissan Rogue?
To repair a P0443 code, you may need to replace the EVAP canister purge volume control solenoid valve, repair any damaged wiring or connectors, and clear the trouble code using an OBDII scanner.
7. Is it possible to reset a P0443 code on a 2012 Nissan Rogue without fixing the issue?
While you can clear the trouble code using an OBDII scanner, it is important to address the underlying problem causing the P0443 code to prevent it from recurring.
8. Will a P0443 code on a 2012 Nissan Rogue affect the vehicle's emissions?
Yes, a P0443 code can impact the vehicle's emissions by causing the EVAP system to malfunction, potentially leading to increased emissions and failing emissions tests.
9. How much does it typically cost to repair a P0443 code on a 2012 Nissan Rogue?
The cost of repairing a P0443 code can vary depending on the specific issue, but it may range from $100 to $300 for parts and labor, excluding any diagnostic fees.
10. Can a DIY enthusiast fix a P0443 code on a 2012 Nissan Rogue?
Depending on your skill level and experience, a DIY enthusiast may be able to replace the EVAP canister purge volume control solenoid valve or repair wiring issues associated with a P0443 code.
Discuss the causes and fixes for P0443 2012 Nissan Rogue OBDII Code
Code P0443 2012 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.