P0442 CHEVROLET - Evaporative Emission Control System Leak Detected Small Leak
Tech notesThe P0442 code means that the control module has detected a small leak in the Evaporative Emission (EVAP). The loose fuel tank filler cap is the most common cause that triggers the P0442 code.
User Submitted Video
When is the code detected?Malfunction is detected when EVAP control system has a leak, EVAP control system does not operate properly.
P0442 Chevrolet DescriptionThe Powertrain Control Module (PCM) tests the Evaporative Emission (EVAP) system for the following conditions:
- Large and small leaks
- Excess vacuum
- Purge flow during non-commanded conditions
- Fuel Level and Fuel Pressure sensor faults
- EVAP Purge and Vent Valve faults
The PCM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. The PCM commands both the EVAP Purge Solenoid and the EVAP Vent Valve ON when the conditions are met in order to apply an engine vacuum to the EVAP system. The PCM commands the EVAP Purge Solenoid OFF once the system has reached a predetermined level of vacuum. This test verifies if a vacuum can be achieved in the EVAP system. Failure to develop a vacuum may be caused by a large leak or a restriction.