Engine-Codes - Hyundai - P0430 HYUNDAI

P0430 HYUNDAI - Warm Up Catalyst Efficiency Below Threshold Bank 2

Repair Importance Level: 2/3
Repair Difficulty Level: 2/3  What is this?
Table of contents

P0430 HYUNDAI Possible Causes

  • Faulty Three-way Catalyst Converter Bank 2
  • Exhaust Tube
  • Intake Air Leaks
  • Faulty Oxygen (O2) Sensor
  • Faulty Fuel injector(s)
  • Leaking Fuel Injector (s)
  • Faulty Spark plugs
  • Improper Ignition Timing
  • Faulty Engine Control Module (ECM)
  • Dirty Air Filter

How is the P0430 HYUNDAI code repair?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Tech Notes

As the code description implies the P0430 code means that the vehicle's control module has detected that the three-way catalytic converter is not working properly (is not as efficient as the factory is expecting). Replacing the oxygen (O2) sensors may sometimes fix the code, but in most cases the catalytic convert needs to be replaced to fix the problem. If the P0430 code is combined with other codes, try fixing the other codes first.

What is the cost to diagnose the P0430 HYUNDAI code

Labor: 1.0

The cost to diagnose the P0430 HYUNDAI code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

When is the code detected?

If the frequency ratio of front and rear HO2S is higher than threshold value, the PCM determines that a fault exists and the P0430 code is stored.

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P0430 HYUNDAI Meaning

The catalyst’s efficiency is demonstrated by its ability to oxidize CO and hydrocarbon emissions. The Powertrain Control Module (PCM) compares the output signals of the front and rear oxygen sensors to determine whether the output of the rear sensor is beginning to match the output of the front oxygen sensor. Air/fuel mixture compensation keeps the frequency of the front oxygen sensor high due to the changes from rich-to-lean comvustio. The catalyst causes the rear oxygen sensor to have a lower frequency. As the catalyst wears, the rear oxygen sensor’s signal trace begins to match the front oxygen sensor’s signal trace. That is because the catalyst becomes saturated with oxygen and cannot use the oxygen to convert hydrocarbon and CO into H₂O and CO₂ with the same efficiency as when it was new. A completely worn catalyst shows a 100% match between the frequency of the front and rear sensors.

More Information

Need more information on how to fix the P0430 HYUNDAI code?
Get Access to Factory Service Manuals

Need more help?

Get the P0430 Hyundai code diagnosed by a professional: Find a repair shop in your area