P0406 Chrysler Code - Exhaust Gas Recirculation Position Sensor Circuit High
Quick Answer
The P0406 code for Chrysler vehicles indicates a problem with the Exhaust Gas Recirculation (EGR) Position Sensor Circuit being too high. Common causes include Faulty EGR position sensor, Wiring or connector issues in the EGR sensor circuit, Carbon buildup in the EGR system. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0406 Chrysler indicates Exhaust Gas Recirculation Position Sensor Circuit High.
- Common causes
- Common causes include Faulty EGR position sensor, Wiring or connector issues in the EGR sensor circuit, Carbon buildup in the EGR system.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0406 Chrysler Description
The P0406 code for Chrysler vehicles indicates a problem with the Exhaust Gas Recirculation (EGR) Position Sensor Circuit being too high. The EGR system helps reduce emissions by recirculating a portion of the engine's exhaust gas back into the intake manifold, which lowers combustion temperatures and reduces the formation of nitrogen oxides. The EGR position sensor monitors the position of the EGR valve to ensure proper functioning, and if the sensor detects a high voltage signal, it triggers the P0406 code.
Common Causes of P0406 Chrysler
- Faulty EGR position sensor
- Wiring or connector issues in the EGR sensor circuit
- Carbon buildup in the EGR system
- Vacuum leaks in the EGR system
- ECM (Engine Control Module) software issues
Symptoms of P0406 Chrysler
- Check Engine Light illuminated on the dashboard
- Decreased fuel efficiency
- Rough idling or stalling
- Engine knocking or pinging noises
- Increased emissions output
How to Fix P0406 Chrysler
- Diagnose the code using an OBD-II scanner to confirm the P0406 error code.
- Inspect the EGR position sensor, wiring, and connectors for any damage or corrosion.
- Clean the EGR system to remove any carbon buildup that may be affecting sensor readings.
- Test the EGR position sensor's voltage signal to ensure it falls within the manufacturer's specifications.
- Replace the EGR position sensor or repair any wiring/connectivity issues if necessary.
Cost to Fix P0406 Chrysler
The cost of repairing a P0406 code can vary depending on the extent of the issue and the specific components that need to be replaced. On average, the repair cost for this type of issue can range from $200 to $500, including parts and labor. It's important to note that labor rates and diagnostic fees at auto repair shops can vary, so it's recommended to obtain quotes from multiple sources to ensure a competitive price.
When is the Code Detected?
Need more information about the P0406 Chrysler code?
Need more information on how to fix the P0406 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0406 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0406 Chrysler Code
1. What does the OBDII code P0406 indicate on a Chrysler vehicle?
The P0406 code on a Chrysler indicates that there is an excessively high voltage input from the Exhaust Gas Recirculation (EGR) position sensor, suggesting the sensor or its circuit is malfunctioning.
2. What are common symptoms of the P0406 code in a Chrysler?
Symptoms may include rough idling, reduced fuel efficiency, engine stalling, a noticeable decrease in engine performance, and the Check Engine Light turning on.
3. What can cause the P0406 code to appear in a Chrysler?
Causes of the P0406 code include a faulty EGR valve, damaged wiring or connectors in the EGR sensor circuit, or a bad EGR position sensor.
4. How can I diagnose the P0406 code on my Chrysler?
Diagnosing this code involves checking the EGR valve and sensor for proper operation using a scan tool to monitor sensor data, inspecting the wiring and connectors for damage, and possibly testing the sensor with a multimeter to ensure it operates within the manufacturer's specifications.
5. What are the steps to fix the P0406 code in a Chrysler?
Fixing the P0406 code may involve cleaning or replacing the EGR valve, repairing or replacing damaged wiring or connectors, or replacing the EGR position sensor.
6. Can I continue driving my Chrysler with the P0406 code without immediate repair?
While you might be able to continue driving, it is not recommended due to potential further damage to the engine or decreased performance and fuel efficiency. It's best to address the issue as soon as possible.
7. Is the P0406 code serious and what are the risks of not fixing it?
The P0406 code is moderately serious. Ignoring it can lead to poor engine performance, increased emissions, and potentially more severe engine issues over time.
8. How much does it typically cost to resolve a P0406 code in a Chrysler?
The cost to resolve a P0406 code can vary widely depending on the specific repair needed. It might range from $50 to $400, including parts like an EGR valve or sensor and labor costs.
9. Are there any special tools required to diagnose or fix the P0406 code on a Chrysler?
Special tools might include a diagnostic scan tool to read the EGR sensor's voltage output and a multimeter to test electrical connections and sensor functionality.
10. Can a faulty EGR valve trigger other diagnostic codes besides P0406 in a Chrysler?
Yes, a faulty EGR valve can trigger other codes related to EGR system performance, such as P0403 (EGR circuit malfunction) or P0405 (EGR position sensor circuit low).
Discuss the causes and fixes for P0406 Chrysler OBDII Code
-
i replaced egr valve 2 times the engine light came back on again on my 08 chrysler 300 please help
-
Are you using new EGR valves?
Usually replacing the valve take care of the problem, since in your case the code still there, the next step is to check the wire from the PCM to the valve. You should have less than 10.4 at the wire marked on the wire diagram. -
After replacing my o2 sensor and new cats on my 2005 chrysler 300c 5.7 hemi, my codes were showing p0406. My car runs a little funny, especially at lower speeds. I will be replacing the EGR valve tomorrow. What I think is funny is I had less than a half tank when it came on. Next day, I fueled up and as soon as I started the car, light went off. code still showed if i read it but no light. Got below 1/2 tank, light came on, put gas in, light went off. Over the last 3 days, ive kept the tank above 1/2 and haven't seen the light come on and gas mileage went back up (was down to 16mpg with light on) I don't know why putting gas in would affect egr vavle??? and no, it's not my gas cap.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.