P0405 2014 GMC Sierra Code - Exhaust Gas Recirculation Position Sensor Circuit Low Voltage
Quick Answer
The P0405 code for a 2014 GMC Sierra indicates a problem with the Exhaust Gas Recirculation (EGR) Position Sensor Circuit, specifically detecting low voltage. Common causes include Faulty EGR Position Sensor, Damaged wiring or connectors in the sensor circuit, Clogged EGR valve. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0405 2014 GMC Sierra indicates Exhaust Gas Recirculation Position Sensor Circuit Low Voltage.
- Common causes
- Common causes include Faulty EGR Position Sensor, Damaged wiring or connectors in the sensor circuit, Clogged EGR valve.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0405 2014 GMC Sierra Description
The P0405 code for a 2014 GMC Sierra indicates a problem with the Exhaust Gas Recirculation (EGR) Position Sensor Circuit, specifically detecting low voltage. The EGR system is responsible for recirculating a portion of exhaust gases back into the engine's intake manifold to reduce harmful emissions and control combustion temperatures. The EGR Position Sensor monitors the position of the EGR valve to ensure proper operation.
Common Causes of P0405 2014 GMC Sierra
- Faulty EGR Position Sensor
- Damaged wiring or connectors in the sensor circuit
- Clogged EGR valve
- Carbon buildup in the EGR system
- ECM (Engine Control Module) software issues
Symptoms of P0405 2014 GMC Sierra
- Check Engine Light illuminated on the dashboard
- Rough idle or stalling
- Decreased fuel efficiency
- Engine knocking or pinging noises
- Failed emissions test
How to Fix P0405 2014 GMC Sierra
- Begin by diagnosing the exact cause of the low voltage issue, using a scan tool to retrieve the specific fault codes and pinpoint the problem.
- Inspect and test the EGR Position Sensor and its wiring for any damage or malfunction. Replace the sensor if necessary.
- Clean or replace the EGR valve to ensure proper operation and reduce carbon buildup.
- Clear the fault codes from the ECM and reset the system to see if the issue has been resolved.
- Test drive the vehicle to ensure the problem has been successfully addressed and the Check Engine Light stays off.
Cost to Fix P0405 2014 GMC Sierra
The cost of repairing a P0405 code on a 2014 GMC Sierra can vary depending on the exact cause of the issue. Typically, the price for parts such as a new EGR Position Sensor can range from $50 to $150, while labor costs can add an additional $100 to $200. Overall, the total repair cost may fall between $150 and $350. It's important to factor in diagnostic time and labor rates, which can vary based on location and the service provider.
Need more information about the P0405 2014 GMC Sierra code?
Need more information on how to fix the P0405 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0405 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0405 2014 GMC Sierra Code
No Frequently Asked Questions about P0405 2014 GMC Sierra Code found.
Discuss the causes and fixes for P0405 2014 GMC Sierra OBDII Code
Code P0405 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.