P0404 2014 GMC Sierra Code - Exhaust Gas Recirculation Open Position Performance
Quick Answer
The P0404 diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates a problem with the Exhaust Gas Recirculation (EGR) system. Common causes include Carbon Build-Up: Over time, carbon deposits can accumulate in the EGR system, causing the valve to stick in the open position, Faulty EGR Valve Position Sensor: A malfunctioning EGR valve position sensor can send incorrect signals to the ECM, leading to the P0404 code, Wiring Issues: Damaged or corroded wiring connections to the EGR valve or sensor can disrupt the communication between components. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0404 2014 GMC Sierra indicates Exhaust Gas Recirculation Open Position Performance.
- Common causes
- Common causes include Carbon Build-Up: Over time, carbon deposits can accumulate in the EGR system, causing the valve to stick in the open position, Faulty EGR Valve Position Sensor: A malfunctioning EGR valve position sensor can send incorrect signals to the ECM, leading to the P0404 code, Wiring Issues: Damaged or corroded wiring connections to the EGR valve or sensor can disrupt the communication between components.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0404 2014 GMC Sierra Description
The P0404 diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates a problem with the Exhaust Gas Recirculation (EGR) system. Specifically, it points to an issue with the EGR valve position sensor, signaling that the EGR valve is not in the correct position as commanded by the engine control module (ECM). The EGR system is crucial for reducing nitrogen oxide emissions by recirculating a portion of the exhaust gases back into the intake manifold to be re-burned. When the EGR valve is stuck in an open position or not functioning properly, it can lead to decreased engine performance, increased emissions, and potential long-term damage to the engine components.
Common Causes of P0404 2014 GMC Sierra
- Carbon Build-Up: Over time, carbon deposits can accumulate in the EGR system, causing the valve to stick in the open position.
- Faulty EGR Valve Position Sensor: A malfunctioning EGR valve position sensor can send incorrect signals to the ECM, leading to the P0404 code.
- Wiring Issues: Damaged or corroded wiring connections to the EGR valve or sensor can disrupt the communication between components.
- Vacuum Leaks: Any leaks in the vacuum lines connected to the EGR system can affect the valve's operation.
- ECM Malfunction: In rare cases, a faulty ECM can incorrectly interpret signals from the EGR system, triggering the P0404 code.
Symptoms of P0404 2014 GMC Sierra
- Check Engine Light: The most common symptom associated with the P0404 code is the illumination of the check engine light on the vehicle's dashboard.
- Rough Idle: A malfunctioning EGR valve can cause the engine to idle roughly or even stall at times.
- Decreased Fuel Efficiency: A faulty EGR valve can lead to decreased fuel efficiency as the engine may not be running optimally.
- Engine Knocking: In some cases, a malfunctioning EGR valve can cause engine knocking or pinging noises during operation.
How to Fix P0404 2014 GMC Sierra
- Diagnose the Issue: Use a scan tool to retrieve the DTC and perform a visual inspection of the EGR system components.
- Clean or Replace EGR Valve: Remove the EGR valve and clean it thoroughly to remove any carbon deposits. If cleaning doesn't resolve the issue, consider replacing the valve.
- Check EGR Valve Position Sensor: Test the EGR valve position sensor for proper operation and replace if necessary.
- Inspect Wiring and Vacuum Lines: Check the wiring harness and vacuum lines for any damage or leaks, repairing or replacing as needed.
- Clear DTC and Test Drive: Clear the DTC from the ECM memory, reset the system, and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0404 2014 GMC Sierra
The cost of repairing a P0404 code on a 2014 GMC Sierra can vary depending on the specific cause of the issue. Typically, the cost of replacing an EGR valve can range from $150 to $300, while a new EGR valve position sensor may cost between $50 to $100. Labor costs at auto repair shops can range from $80 to $150 per hour, and the total repair bill can amount to $200 to $500 or more, including parts and labor. It's advisable to consult with a professional mechanic to get an accurate estimate based on the specific diagnosis and repair needed for your vehicle.
Need more information about the P0404 2014 GMC Sierra code?
Need more information on how to fix the P0404 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0404 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0404 2014 GMC Sierra Code
No Frequently Asked Questions about P0404 2014 GMC Sierra Code found.
Discuss the causes and fixes for P0404 2014 GMC Sierra OBDII Code
Code P0404 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.