Engine-Codes.com
Engine-Codes – Audi – P0403 Audi

P0403 Audi Code - Exhaust Gas Recirculation Control Circuit

Quick Answer

The P0403 code for Audi vehicles indicates a problem with the Exhaust Gas Recirculation (EGR) control circuit. Common causes include Faulty EGR valve, Damaged EGR position sensor, Clogged EGR passage. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0403 Audi indicates Exhaust Gas Recirculation Control Circuit.
Common causes
Common causes include Faulty EGR valve, Damaged EGR position sensor, Clogged EGR passage.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
What is this?
Table of contents Created and updated by William Orellana on Sep 08, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0403 Audi Description

The P0403 code for Audi vehicles indicates a problem with the Exhaust Gas Recirculation (EGR) control circuit. The EGR system is responsible for reducing nitrogen oxide emissions by recirculating a portion of the engine's exhaust gas back into the intake manifold. This helps lower combustion temperatures and reduces the formation of harmful emissions.

OBDII Code P0403 Audi - Exhaust Gas Recirculation Control Circuit
P0403 Audi Code - Exhaust Gas Recirculation Control Circuit

Common Causes of P0403 Audi

  1. Faulty EGR valve
  2. Damaged EGR position sensor
  3. Clogged EGR passage
  4. Wiring issues in the EGR control circuit
  5. Carbon buildup in the EGR system

Symptoms of P0403 Audi

  1. Check Engine Light illuminated on the dashboard
  2. Poor fuel economy
  3. Rough idling or engine vibrations
  4. Hesitation or stalling when accelerating
  5. Engine misfires

How to Fix P0403 Audi

  1. Begin by diagnosing the specific cause of the P0403 code using a diagnostic scanner to pinpoint the exact issue.
  2. Inspect the EGR valve, position sensor, and control circuit for any visible damage or signs of wear.
  3. Clean or replace the EGR valve, position sensor, or any clogged passages as needed.
  4. Repair or replace any damaged wiring in the EGR control circuit.
  5. Clear the code from the vehicle's computer and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P0403 Audi

The typical repair costs for resolving a P0403 code in an Audi vehicle can range from $200 to $500, including parts and labor. However, the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It's advisable to check local rates for a more precise estimate. Keep in mind that rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less.

When is the Code Detected?

An improper voltage signal is sent to ECM through the valve

Need more information about the P0403 Audi code?

Need more information on how to fix the P0403 Audi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0403 Audi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0403 Audi Code

What does the OBDII code P0403 mean on an Audi?

Code P0403 indicates a malfunction in the Exhaust Gas Recirculation (EGR) Control Circuit, which regulates the flow of exhaust gases back into the engine for emission control.

What are the common symptoms of code P0403 on an Audi?

Symptoms may include an illuminated check engine light, reduced fuel efficiency, rough idling, engine hesitation, or higher emissions during testing.

What causes the P0403 code to appear on an Audi?

Possible causes include a faulty EGR valve, damaged wiring or connectors in the EGR circuit, a malfunctioning EGR solenoid, or a problem with the engine control module (ECM).

Can I drive my Audi with a P0403 code?

While the car may still be operable, driving with a P0403 code for extended periods can lead to increased emissions, reduced engine performance, and potential damage to other engine components.

How is the P0403 code diagnosed?

A mechanic will visually inspect the EGR system, test the EGR valve and solenoid, check for damaged wiring or connectors, and use a scan tool to monitor EGR circuit data.

How do I fix the P0403 code on my Audi?

Repairs may include replacing the EGR valve, cleaning carbon buildup, repairing or replacing damaged wiring, or addressing issues with the EGR solenoid or ECM.

Can a dirty EGR valve cause the P0403 code?

Yes, carbon buildup on the EGR valve can restrict its movement or block the flow of exhaust gases, triggering the P0403 code.

Will clearing the code fix the issue permanently?

Clearing the code may temporarily turn off the check engine light, but it won’t fix the underlying issue. The root cause must be addressed to prevent the code from returning.

How much does it cost to fix a P0403 code on an Audi?

Repair costs vary depending on the issue but typically range from $100 to $400 for parts and labor, with EGR valve replacement being a common expense.

Can a faulty ECM cause the P0403 code?

Yes, although rare, a malfunctioning engine control module (ECM) can fail to properly control the EGR circuit, leading to the P0403 code.

Discuss the causes and fixes for P0403 Audi OBDII Code

Submit a New Comment

Code P0403 Audi comments

No comments found for this page.