P0402 2016 Chevrolet Silverado Code - Exhaust Gas Recirculation Flow Excessive
Quick Answer
The P0402 code for a 2016 Chevrolet Silverado indicates that there is excessive exhaust gas recirculation (EGR) flow. Common causes include Malfunctioning EGR valve, Clogged EGR passages, Faulty EGR sensor. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0402 2016 Chevrolet Silverado indicates Exhaust Gas Recirculation Flow Excessive.
- Common causes
- Common causes include Malfunctioning EGR valve, Clogged EGR passages, Faulty EGR sensor.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0402 2016 Chevrolet Silverado Description
The P0402 code for a 2016 Chevrolet Silverado indicates that there is excessive exhaust gas recirculation (EGR) flow. The EGR system is responsible for recirculating a small amount of exhaust gas back into the engine's intake manifold to reduce nitrogen oxide emissions. When the EGR flow is excessive, it can lead to issues with engine performance, fuel efficiency, and emissions.
Common Causes of P0402 2016 Chevrolet Silverado
- Malfunctioning EGR valve
- Clogged EGR passages
- Faulty EGR sensor
- Vacuum leaks in the EGR system
- Carbon buildup in the EGR system
Symptoms of P0402 2016 Chevrolet Silverado
- Rough idling
- Hesitation or lack of acceleration
- Decreased fuel efficiency
- Engine overheating
- Illumination of the check engine light
How to Fix P0402 2016 Chevrolet Silverado
- Diagnose the issue by using a scan tool to verify the P0402 code and inspecting the EGR valve and related components.
- Clean or replace the EGR valve to ensure proper operation.
- Clear any carbon buildup in the EGR passages.
- Check for vacuum leaks in the EGR system and repair as necessary.
- Reset the check engine light and monitor the vehicle for any recurring issues.
Cost to Fix P0402 2016 Chevrolet Silverado
The cost of repairing a P0402 code on a 2016 Chevrolet Silverado can vary depending on the specific cause of the issue. On average, the cost of parts for this repair can range from $100 to $300, while labor costs can range from $100 to $300 as well. Overall, the total repair cost may fall between $200 and $600. It's important to note that these estimates are general and actual costs may vary based on location and the shop performing the repairs.
Need more information about the P0402 2016 Chevrolet Silverado code?
Need more information on how to fix the P0402 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0402 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0402 2016 Chevrolet Silverado Code
What does the OBDII code P0402 mean for a 2016 Chevrolet Silverado?
P0402 indicates that the Exhaust Gas Recirculation (EGR) system is allowing excessive flow, which may disrupt engine performance.
What are the common symptoms of code P0402 on a 2016 Chevrolet Silverado?
Symptoms may include rough idling, decreased fuel efficiency, engine hesitation, or the check engine light turning on.
What causes the P0402 code on a 2016 Chevrolet Silverado?
Common causes include a stuck-open EGR valve, carbon buildup in the EGR system, a faulty EGR sensor, or issues with the EGR passages.
Can driving with code P0402 damage my 2016 Chevrolet Silverado?
Driving for an extended period with this code can lead to reduced engine efficiency and potential damage to internal components due to excess heat or improper combustion.
How can I diagnose the P0402 code on my 2016 Chevrolet Silverado?
Start by inspecting the EGR valve for carbon buildup or damage, check the EGR sensor readings, and use a scanner to monitor live data for irregularities in flow.
How do I fix the P0402 code on a 2016 Chevrolet Silverado?
Repairs may involve cleaning or replacing the EGR valve, clearing carbon buildup in the EGR system, or replacing faulty sensors.
What tools are needed to fix the P0402 code on a 2016 Chevrolet Silverado?
You may need a diagnostic scanner, basic hand tools, EGR cleaner, and possibly replacement parts such as an EGR valve or sensor.
Is cleaning the EGR valve a reliable solution for code P0402?
Yes, cleaning the EGR valve can often resolve the issue if carbon buildup is causing the excessive flow.
How much does it cost to repair the P0402 code on a 2016 Chevrolet Silverado?
Repair costs can range from $150 to $500, depending on whether cleaning or part replacement is required.
Can a faulty EGR sensor trigger the P0402 code on a 2016 Chevrolet Silverado?
Yes, a malfunctioning EGR sensor can send incorrect data to the ECU, leading to excessive EGR flow and triggering the code.
Discuss the causes and fixes for P0402 2016 Chevrolet Silverado OBDII Code
Code P0402 2016 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.