P0402 1999 Ford F150 Code - Exhaust Gas Recirculation Flow Excessive Detected
Quick Answer
The P0402 diagnostic trouble code (DTC) for a 1999 Ford F150 indicates that the Exhaust Gas Recirculation (EGR) flow is excessive. Common causes include Faulty EGR valve, Clogged EGR passages, Malfunctioning EGR temperature sensor. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0402 1999 Ford F150 indicates Exhaust Gas Recirculation Flow Excessive Detected.
- Common causes
- Common causes include Faulty EGR valve, Clogged EGR passages, Malfunctioning EGR temperature sensor.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0402 1999 Ford F150 Description
The P0402 diagnostic trouble code (DTC) for a 1999 Ford F150 indicates that the Exhaust Gas Recirculation (EGR) flow is excessive. The EGR system is responsible for recirculating a portion of the exhaust gases back into the engine's intake manifold to reduce nitrogen oxide emissions. When the EGR flow is excessive, it means that more exhaust gases are being reintroduced into the combustion chamber than necessary, which can lead to a variety of issues.
Common Causes of P0402 1999 Ford F150
- Faulty EGR valve
- Clogged EGR passages
- Malfunctioning EGR temperature sensor
- EGR vacuum control solenoid issue
- Carbon buildup in the EGR system
Symptoms of P0402 1999 Ford F150
- Decreased engine performance and acceleration
- Rough idling or stalling
- Hesitation or surging while driving
- Increased fuel consumption
- Illumination of the check engine light
How to Fix P0402 1999 Ford F150
- Diagnose the specific cause of the excessive EGR flow by performing a thorough inspection of the EGR valve, passages, temperature sensor, and vacuum control solenoid.
- Clean or replace the EGR valve if it is found to be faulty.
- Clear any clogs in the EGR passages to ensure proper flow of exhaust gases.
- Test the EGR temperature sensor and replace if necessary.
- Check the EGR vacuum control solenoid for proper operation and replace if defective.
Cost to Fix P0402 1999 Ford F150
The typical repair costs for addressing a P0402 code on a 1999 Ford F150 can range from $200 to $500, depending on the specific cause of the issue and the cost of parts and labor. It's important to note that diagnosis time and labor rates at auto repair shops can vary, with hourly rates typically ranging from $80 to $150. Factors such as location, vehicle make and model, and engine type can also influence the overall repair costs. It is advisable to consult with a professional mechanic to get an accurate estimate based on the specific circumstances of the vehicle.
Tech Notes for P0402 1999 Ford F150
When is the Code Detected?
Need more information about the P0402 1999 Ford F150 code?
Need more information on how to fix the P0402 1999 Ford F150 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0402 1999 Ford F150 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0402 1999 Ford F150 Code
1. What are the common symptoms of OBDII code P0402 on a 1999 Ford F150?
- Common symptoms include rough idling, decreased fuel efficiency, engine hesitation, and potentially a Check Engine light.
2. What are the possible causes of OBDII code P0402 on a 1999 Ford F150?
- The code P0402 typically indicates excessive EGR (Exhaust Gas Recirculation) flow, which can be caused by a faulty EGR valve, clogged EGR passages, or a malfunctioning DPFE (Differential Pressure Feedback EGR) sensor.
3. How can I diagnose the OBDII code P0402 on my 1999 Ford F150?
- To diagnose code P0402, you can inspect the EGR valve, clean or replace any clogged EGR passages, test the DPFE sensor, and check for vacuum leaks in the EGR system.
4. Can a dirty EGR valve cause the OBDII code P0402 on a 1999 Ford F150?
- Yes, a dirty or malfunctioning EGR valve can cause insufficient or excessive EGR flow, triggering the OBDII code P0402.
5. How can I repair OBDII code P0402 on my 1999 Ford F150?
- Repair options may include cleaning or replacing the EGR valve, cleaning EGR passages, replacing the DPFE sensor, and ensuring proper vacuum supply to the EGR system.
6. Is it safe to continue driving with OBDII code P0402 on a 1999 Ford F150?
- It is generally not recommended to drive with code P0402 unresolved, as it can lead to reduced engine performance and potentially cause damage to other components over time.
7. Can a faulty DPFE sensor trigger the OBDII code P0402 on a 1999 Ford F150?
- Yes, a malfunctioning DPFE sensor, which measures EGR flow, can cause incorrect readings and lead to the detection of excessive EGR flow, resulting in code P0402.
8. Will resetting the OBDII code P0402 on a 1999 Ford F150 make it go away permanently?
- Resetting the code may temporarily turn off the Check Engine light, but if the underlying issue causing P0402 is not addressed, the code is likely to reappear.
9. How important is it to fix OBDII code P0402 promptly on a 1999 Ford F150?
- It is important to address code P0402 promptly to prevent potential engine performance issues, reduced fuel efficiency, and further damage to emission control components.
10. Can a mechanic help diagnose and repair OBDII code P0402 on a 1999 Ford F150?
- Yes, a qualified mechanic can perform diagnostic tests, identify the root cause of code P0402, and recommend the necessary repairs to resolve the issue effectively.
Discuss the causes and fixes for P0402 1999 Ford F150 OBDII Code
Code P0402 1999 Ford F150 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.