Engine-Codes.com
Engine-Codes – Ford – P0394 2011 Ford Fusion

P0394 2011 Ford Fusion Code - Camshaft Position Sensor 'B' Circuit Intermittent Bank 2

Quick Answer

The diagnostic trouble code (DTC) P0394 in a 2011 Ford Fusion indicates a problem with the Camshaft Position Sensor 'B' Circuit on Bank 2. Common causes include Faulty camshaft position sensor, Damaged or corroded wiring/connectors related to the sensor, ECM malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0394 2011 Ford Fusion indicates Camshaft Position Sensor 'B' Circuit Intermittent Bank 2.
Common causes
Common causes include Faulty camshaft position sensor, Damaged or corroded wiring/connectors related to the sensor, ECM malfunction.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 17, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0394 2011 Ford Fusion Description

The diagnostic trouble code (DTC) P0394 in a 2011 Ford Fusion indicates a problem with the Camshaft Position Sensor 'B' Circuit on Bank 2. The camshaft position sensor is a crucial component in the engine management system, responsible for monitoring the position of the camshaft(s) in relation to the crankshaft. This information is essential for the engine control module (ECM) to accurately control fuel injection timing and ignition timing.

OBDII Code P0394 2011 Ford Fusion - Camshaft Position Sensor 'B' Circuit Intermittent Bank 2
P0394 2011 Ford Fusion Code - Camshaft Position Sensor 'B' Circuit Intermittent Bank 2

Common Causes of P0394 2011 Ford Fusion

  1. Faulty camshaft position sensor
  2. Damaged or corroded wiring/connectors related to the sensor
  3. ECM malfunction
  4. Timing chain/belt alignment issues
  5. Engine mechanical problems affecting camshaft position

Symptoms of P0394 2011 Ford Fusion

  1. Check Engine Light illuminated on the dashboard
  2. Engine misfires or runs rough
  3. Reduced fuel efficiency
  4. Engine stalling or hesitation during acceleration
  5. Rough idling or difficulty starting the engine

How to Fix P0394 2011 Ford Fusion

  1. Begin by diagnosing the specific cause of the issue using a scan tool to confirm the P0394 code and perform further testing if necessary.
  2. Inspect the camshaft position sensor, wiring, and connectors for any visible damage or corrosion. Replace the sensor if it is found to be faulty.
  3. Check the ECM for any signs of malfunction or programming issues. Update or replace the ECM if needed.
  4. Verify the timing chain/belt alignment to ensure proper synchronization between the camshaft and crankshaft.
  5. Clear the DTC and perform a test drive to confirm that the issue has been resolved.

Cost to Fix P0394 2011 Ford Fusion

The cost of repairing a camshaft position sensor 'B' circuit intermittent issue on a 2011 Ford Fusion can vary depending on the specific cause of the problem and the labor rates in your area. On average, you can expect to pay between $150 to $300 for parts and labor. Keep in mind that prices may fluctuate based on the severity of the issue and the need for additional repairs. It is recommended to consult with a qualified mechanic or repair shop for a more accurate estimate based on your vehicle's condition. Labor rates typically range from $80 to $150 per hour, but this can vary based on location and the repair facility.

What does this mean?

Tech Notes for P0394 2011 Ford Fusion

Sometimes and in some models, low battery voltage or a weak starter can trigger a Camshaft Position Sensor code.

When is the Code Detected?

The camshaft position sensor signal sent to the Engine Control Module (ECM) is intermittent

Need more information about the P0394 2011 Ford Fusion code?

Need more information on how to fix the P0394 2011 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0394 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0394 2011 Ford Fusion Code

1. What are the common symptoms of OBDII code P0394 in a 2011 Ford Fusion?

- Common symptoms include engine misfires, rough idling, poor acceleration, and potentially stalling.

2. What does the OBDII code P0394 on a 2011 Ford Fusion indicate?

- The code P0394 indicates an issue with the Camshaft Position Sensor 'B' Circuit Intermittent Bank 2.

3. What are the possible causes of OBDII code P0394 in a 2011 Ford Fusion?

- Possible causes include a faulty camshaft position sensor, wiring issues, sensor connection problems, or a malfunctioning engine control module (ECM).

4. How can I diagnose the Camshaft Position Sensor 'B' Circuit Intermittent Bank 2 issue in my 2011 Ford Fusion?

- You can diagnose the issue by performing a visual inspection of the sensor and its wiring, checking for loose connections, using an OBDII scanner to read the code and data, and conducting voltage tests.

5. Can I continue driving my 2011 Ford Fusion with OBDII code P0394?

- It is not recommended to drive with this code as it can lead to further engine problems and potential breakdowns. It's advisable to address the issue promptly.

6. How can I repair OBDII code P0394 in my 2011 Ford Fusion?

- Repair options include replacing the faulty camshaft position sensor, repairing or replacing damaged wiring, ensuring proper sensor connections, and resetting the ECM.

7. Is it possible to clear the OBDII code P0394 in a 2011 Ford Fusion without fixing the issue?

- While you can clear the code temporarily, it is not a permanent solution as the underlying problem causing the code will persist and may lead to further issues.

8. How much does it typically cost to repair OBDII code P0394 in a 2011 Ford Fusion?

- The cost of repair can vary depending on the cause of the issue, but it may range from $100 to $300 for parts and labor.

9. Can a DIY enthusiast fix OBDII code P0394 in a 2011 Ford Fusion?

- Depending on your skill level and access to tools, some DIY enthusiasts may be able to replace the camshaft position sensor or address wiring issues. However, complex ECM-related problems may require professional assistance.

10. How can I prevent OBDII code P0394 from recurring in my 2011 Ford Fusion?

- To prevent the code from recurring, regularly maintain your vehicle, address any engine performance issues promptly, and ensure timely inspections and repairs when warning signs appear.

Discuss the causes and fixes for P0394 2011 Ford Fusion OBDII Code

Submit a New Comment

Code P0394 2011 Ford Fusion comments

No comments found for this page.