Engine-Codes.com
Engine-Codes – Scion – P0393 Scion

P0393 Scion Code - Camshaft Position Sensor 'B' Circuit High Bank 2

Quick Answer

The P0393 code for a Scion indicates a problem with the Camshaft Position Sensor 'B' Circuit on Bank 2. Common causes include Faulty Camshaft Position Sensor: The sensor itself may be malfunctioning, sending incorrect signals to the ECM, Wiring Issues: Damaged or corroded wiring connections can disrupt the signal between the sensor and the ECM, Sensor Alignment: If the sensor is not properly aligned with the camshaft, it may not be able to accurately detect its position. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0393 Scion indicates Camshaft Position Sensor 'B' Circuit High Bank 2.
Common causes
Common causes include Faulty Camshaft Position Sensor: The sensor itself may be malfunctioning, sending incorrect signals to the ECM, Wiring Issues: Damaged or corroded wiring connections can disrupt the signal between the sensor and the ECM, Sensor Alignment: If the sensor is not properly aligned with the camshaft, it may not be able to accurately detect its position.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 12, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0393 Scion Description

The P0393 code for a Scion indicates a problem with the Camshaft Position Sensor 'B' Circuit on Bank 2. The camshaft position sensor is a crucial component in the engine management system, responsible for monitoring the position of the camshaft and sending this information to the engine control module (ECM). The ECM uses this data to control ignition timing and fuel injection, ensuring optimal engine performance.

OBDII Code P0393 Scion - Camshaft Position Sensor 'B' Circuit High Bank 2
P0393 Scion Code - Camshaft Position Sensor 'B' Circuit High Bank 2

Common Causes of P0393 Scion

  1. Faulty Camshaft Position Sensor: The sensor itself may be malfunctioning, sending incorrect signals to the ECM.
  2. Wiring Issues: Damaged or corroded wiring connections can disrupt the signal between the sensor and the ECM.
  3. Sensor Alignment: If the sensor is not properly aligned with the camshaft, it may not be able to accurately detect its position.
  4. ECM Malfunction: A problem with the engine control module could also cause the sensor to read high.
  5. Timing Chain/Belt Issues: Problems with the timing chain or belt can affect the camshaft's position, leading to sensor errors.

Symptoms of P0393 Scion

  1. Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the dashboard.
  2. Rough Idle: The engine may experience rough idling, with fluctuations in RPMs and a noticeable lack of smoothness.
  3. Engine Misfires: Misfires may occur, leading to a loss of power and acceleration.
  4. Poor Fuel Economy: A faulty camshaft position sensor can cause the engine to run less efficiently, leading to decreased fuel economy.
  5. Engine Stalling: In severe cases, the engine may stall unexpectedly, especially at idle or low speeds.

How to Fix P0393 Scion

  1. Diagnose: Use a scan tool to read the code and confirm the issue. Check the wiring connections and sensor alignment.
  2. Replace Sensor: If the sensor is faulty, replace it with a new one. Ensure proper alignment during installation.
  3. Check Wiring: Inspect the wiring harness for any damage or corrosion. Repair or replace as needed.
  4. Reset ECM: Clear the code from the ECM and reset the system to see if the issue has been resolved.
  5. Test Drive: Take the vehicle for a test drive to ensure that the problem has been fixed and that the engine is running smoothly.

Cost to Fix P0393 Scion

The cost of repairing a P0393 code on a Scion can vary depending on the specific model and year of the vehicle, as well as the labor rates in your area. On average, you can expect to pay anywhere from $150 to $400 for parts and labor. This estimate includes the cost of a new camshaft position sensor and any additional components that may need to be replaced. Keep in mind that diagnostic time and labor rates can vary, so it's recommended to get a few quotes from local auto repair shops to find the best price.

What does this mean?

Tech Notes for P0393 Scion

Sometimes and in some models, low battery voltage or a weak starter can trigger a Camshaft Position Sensor code.

When is the Code Detected?

The camshaft position sensor signal sent to the Engine Control Module (ECM) is too high

Need more information about the P0393 Scion code?

Need more information on how to fix the P0393 Scion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0393 Scion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0393 Scion Code

No Frequently Asked Questions about P0393 Scion Code found.

Discuss the causes and fixes for P0393 Scion OBDII Code

Submit a New Comment

Code P0393 Scion comments

No comments found for this page.