P0392 Code - Camshaft Position Sensor 'B' Circuit Low Bank 2
Quick Answer
The OBD-II code P0392 indicates a problem with the Camshaft Position Sensor 'B' Circuit on Bank 2 of the engine. Common causes include Faulty camshaft position sensor 'B', Damaged wiring or connectors in the sensor circuit, Corrosion or poor electrical connections. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0392 indicates Camshaft Position Sensor 'B' Circuit Low Bank 2.
- Common causes
- Common causes include Faulty camshaft position sensor 'B', Damaged wiring or connectors in the sensor circuit, Corrosion or poor electrical connections.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0392 Description
The OBD-II code P0392 indicates a problem with the Camshaft Position Sensor 'B' Circuit on Bank 2 of the engine. The camshaft position sensor is responsible for monitoring the position of the camshaft and sending this information to the engine control module (ECM) to ensure proper fuel injection and ignition timing. In this case, the code specifically points to a low voltage condition in the sensor circuit on the second bank of cylinders.
Common Causes of P0392
- Faulty camshaft position sensor 'B'
- Damaged wiring or connectors in the sensor circuit
- Corrosion or poor electrical connections
- Issues with the ECM or related components
- Timing belt or chain problems affecting camshaft position
Symptoms of P0392
- Engine misfires or rough idling
- Decreased fuel efficiency
- Stalling or difficulty starting
- Engine hesitation or lack of power
- Illumination of the Check Engine Light
How to Fix P0392
- Use a diagnostic scan tool to retrieve the specific trouble code and verify the low voltage condition on Bank 2.
- Inspect the wiring and connectors in the camshaft position sensor circuit for any damage or corrosion. Repair or replace as needed.
- Test the camshaft position sensor 'B' on Bank 2 using a multimeter to ensure it is functioning within specifications. Replace the sensor if necessary.
- Clear the trouble code from the ECM's memory and perform a road test to confirm that the issue has been resolved.
- If the problem persists, further diagnosis may be required to identify any underlying issues with the ECM or engine components.
Cost to Fix P0392
The typical repair costs for addressing a P0392 code can vary depending on the specific cause of the issue and the vehicle's make and model. In general, replacing a faulty camshaft position sensor can cost between $50 and $200, including parts and labor. However, if additional wiring or ECM repairs are needed, the total cost could range from $100 to $500 or more. It's advisable to consult with a trusted mechanic or auto repair shop for a more accurate estimate based on the specific circumstances of your vehicle. Keep in mind that diagnostic time and labor rates at auto repair shops can vary, so it's essential to inquire about these factors before proceeding with the repair.
Tech Notes for P0392
When is the Code Detected?
Need more information about the P0392 code?
Need more information on how to fix the P0392 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0392 code diagnosed by a professional: Find a repair shop in your area
Code P0392 Information for Specific Makes
- P0392 Audi — Camshaft Position Sensor 'B' Circuit Low Bank 2
- P0392 Lexus — Camshaft Position Sensor 'B' Circuit Low Bank 2
- P0392 Scion — Camshaft Position Sensor 'B' Circuit Low Bank 2
- P0392 Toyota — Camshaft Position Sensor 'B' Circuit Low Bank 2
- P0392 Volkswagen — Camshaft Position Sensor 'B' Circuit Low Bank 2
Frequently Asked Questions about P0392 Code
1. What are the common symptoms of OBDII code P0392?
The common symptoms of OBDII code P0392 include engine misfires, rough idling, stalling, and a decrease in fuel efficiency.
2. What can cause OBDII code P0392 to trigger?
The most common causes of OBDII code P0392 are a faulty camshaft position sensor, wiring issues in the camshaft position sensor circuit, or a problem with the engine control module (ECM).
3. How can I diagnose the cause of OBDII code P0392?
To diagnose the cause of OBDII code P0392, you can use a scan tool to check for the code, visually inspect the camshaft position sensor and its wiring, and perform tests to ensure proper sensor function.
4. Can I continue driving with OBDII code P0392 present?
It is not recommended to continue driving with OBDII code P0392 present, as it can lead to further engine damage and potential safety hazards.
5. How can I repair OBDII code P0392?
Repairing OBDII code P0392 typically involves replacing the faulty camshaft position sensor, repairing any damaged wiring, or addressing any underlying ECM issues.
6. Is it possible to clear OBDII code P0392 without fixing the underlying issue?
Clearing OBDII code P0392 without fixing the underlying issue may temporarily turn off the check engine light, but the code is likely to reappear until the root cause is addressed.
7. Are there any DIY repair tips for OBDII code P0392?
While some may attempt to replace the camshaft position sensor themselves, it is recommended to consult a professional mechanic for accurate diagnosis and repair of OBDII code P0392.
8. How much does it cost to repair OBDII code P0392?
The cost of repairing OBDII code P0392 can vary depending on the specific issue, but it may range from $100 to $300 for parts and labor.
9. Can weather conditions affect OBDII code P0392?
Extreme weather conditions, such as excessive heat or moisture, can potentially impact the performance of the camshaft position sensor and trigger OBDII code P0392.
10. How often does OBDII code P0392 occur in vehicles?
OBDII code P0392 is relatively uncommon compared to other codes, but it can still occur in vehicles with camshaft position sensor issues, particularly in older or high-mileage vehicles.
Discuss the causes and fixes for P0392 OBDII Code
Code P0392 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.