P0390 2012 Ford Fusion Code - Camshaft Position Sensor 'B' Circuit Bank 2
Quick Answer
The diagnostic trouble code P0390 for a 2012 Ford Fusion indicates a problem with the Camshaft Position Sensor 'B' Circuit Bank 2. Common causes include Faulty Camshaft Position Sensor: The sensor itself may be malfunctioning, leading to inaccurate readings being sent to the ECM, Wiring Issues: Damaged or corroded wiring connecting the sensor to the ECM can cause a disruption in the signal, Sensor Alignment: Improper installation or misalignment of the sensor can also trigger this code. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0390 2012 Ford Fusion indicates Camshaft Position Sensor 'B' Circuit Bank 2.
- Common causes
- Common causes include Faulty Camshaft Position Sensor: The sensor itself may be malfunctioning, leading to inaccurate readings being sent to the ECM, Wiring Issues: Damaged or corroded wiring connecting the sensor to the ECM can cause a disruption in the signal, Sensor Alignment: Improper installation or misalignment of the sensor can also trigger this code.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0390 2012 Ford Fusion Description
The diagnostic trouble code P0390 for a 2012 Ford Fusion indicates a problem with the Camshaft Position Sensor 'B' Circuit Bank 2. The camshaft position sensor plays a crucial role in the engine's operation by monitoring the position of the camshaft and sending this information to the engine control module (ECM). The ECM uses this data to control ignition timing and fuel injection, ensuring optimal engine performance.
Common Causes of P0390 2012 Ford Fusion
- Faulty Camshaft Position Sensor: The sensor itself may be malfunctioning, leading to inaccurate readings being sent to the ECM.
- Wiring Issues: Damaged or corroded wiring connecting the sensor to the ECM can cause a disruption in the signal.
- Sensor Alignment: Improper installation or misalignment of the sensor can also trigger this code.
- ECM Malfunction: In rare cases, a problem with the engine control module can lead to the P0390 code being triggered.
- Timing Chain/Belt Issues: Problems with the timing chain or belt can affect the camshaft's position, leading to erroneous readings from the sensor.
Symptoms of P0390 2012 Ford Fusion
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the dashboard.
- Engine Misfires: A faulty camshaft position sensor can cause misfires in the engine, leading to rough idling or hesitation during acceleration.
- Decreased Fuel Efficiency: Issues with the camshaft position sensor can result in poor fuel efficiency due to incorrect timing of fuel injection.
- Engine Stalling: In severe cases, the engine may stall unexpectedly, especially at low speeds or when idling.
- Rough Engine Performance: The engine may run rough or exhibit uneven performance due to incorrect camshaft position data.
How to Fix P0390 2012 Ford Fusion
- Diagnose the Issue: Use a scan tool to read the trouble code and perform a visual inspection of the camshaft position sensor and its wiring.
- Replace the Camshaft Position Sensor: If the sensor is faulty, replace it with a new one following the manufacturer's guidelines.
- Check Wiring: Inspect the wiring harness for any damage or corrosion, repairing or replacing as necessary.
- Reset the ECM: Clear the trouble code from the ECM's memory using a scan tool after completing the repair.
- Test Drive: Take the vehicle for a test drive to ensure that the issue has been resolved and that the check engine light does not reappear.
Cost to Fix P0390 2012 Ford Fusion
The typical repair costs for addressing the P0390 code on a 2012 Ford Fusion can range from $100 to $300, depending on the cost of the camshaft position sensor and the labor involved. Additional costs may be incurred if wiring repairs or ECM diagnostics are needed. It's important to note that labor rates at auto repair shops can vary, with hourly rates typically ranging from $80 to $150. For a more accurate estimate, it's advisable to consult with local auto repair shops.
Tech Notes for P0390 2012 Ford Fusion
When is the Code Detected?
Need more information about the P0390 2012 Ford Fusion code?
Need more information on how to fix the P0390 2012 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0390 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0390 2012 Ford Fusion Code
1. What does the OBDII code P0390 mean on a 2012 Ford Fusion?
P0390 indicates an issue with the Camshaft Position Sensor 'B' Circuit on Bank 2, which means the engine control module (ECM) is detecting an abnormal signal or no signal from the sensor.
2. What are the symptoms of the P0390 code on a 2012 Ford Fusion?
Common symptoms include rough idling, reduced engine performance, stalling, difficulty starting, and the check engine light being illuminated.
3. What causes the P0390 code to appear in a 2012 Ford Fusion?
Possible causes include a faulty camshaft position sensor, damaged wiring or connectors, a timing issue, or a malfunctioning ECM.
4. Which sensor is affected by the P0390 code in a 2012 Ford Fusion?
The code refers to the Camshaft Position Sensor 'B' on Bank 2, which is typically the side of the engine opposite Cylinder 1.
5. How do I diagnose a P0390 code on my 2012 Ford Fusion?
Start by checking the wiring and connectors for damage or corrosion, inspecting the camshaft position sensor for faults, and verifying proper timing alignment.
6. Can a P0390 code damage my 2012 Ford Fusion's engine?
While it may not cause immediate damage, ignoring the code can lead to poor engine performance, reduced fuel efficiency, and potential long-term issues if not addressed.
7. How do I fix a P0390 code on a 2012 Ford Fusion?
Repair options include replacing the faulty camshaft position sensor, repairing or replacing damaged wiring, resetting the ECM, or addressing timing chain or gear issues if necessary.
8. How much does it cost to fix the P0390 code on a 2012 Ford Fusion?
Replacing a camshaft position sensor typically costs between $100 and $300, including parts and labor. Additional repairs for wiring or timing issues may increase costs.
9. Can I drive my 2012 Ford Fusion with a P0390 code?
Driving with a P0390 code is possible but not recommended, as it may lead to further engine issues or unsafe driving conditions due to poor performance.
10. Can a dead battery cause the P0390 code on a 2012 Ford Fusion?
A weak or dead battery is unlikely to directly cause a P0390 code, but electrical issues from a failing battery could potentially interfere with the sensor’s signal.
Discuss the causes and fixes for P0390 2012 Ford Fusion OBDII Code
Code P0390 2012 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.