P0390 2007 Ford Fusion Code - Camshaft Position Sensor 'B' Circuit Bank 2
Quick Answer
The OBD-II trouble code P0390 for a 2007 Ford Fusion indicates a problem with the Camshaft Position Sensor 'B' Circuit Bank 2. Common causes include Faulty Camshaft Position Sensor: The sensor itself may be malfunctioning, providing incorrect readings to the ECM, Wiring Issues: Damaged or corroded wiring connecting the sensor to the ECM can disrupt the signal transmission, ECM Malfunction: A problem with the engine control module can also trigger this code, affecting the sensor's operation. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0390 2007 Ford Fusion indicates Camshaft Position Sensor 'B' Circuit Bank 2.
- Common causes
- Common causes include Faulty Camshaft Position Sensor: The sensor itself may be malfunctioning, providing incorrect readings to the ECM, Wiring Issues: Damaged or corroded wiring connecting the sensor to the ECM can disrupt the signal transmission, ECM Malfunction: A problem with the engine control module can also trigger this code, affecting the sensor's operation.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0390 2007 Ford Fusion Description
The OBD-II trouble code P0390 for a 2007 Ford Fusion indicates a problem with the Camshaft Position Sensor 'B' Circuit Bank 2. This sensor plays a crucial role in the engine's operation by monitoring the position of the camshaft and sending this information to the engine control module (ECM). The ECM uses this data to determine the optimal timing for fuel injection and ignition, ensuring smooth engine performance and efficiency.
Common Causes of P0390 2007 Ford Fusion
- Faulty Camshaft Position Sensor: The sensor itself may be malfunctioning, providing incorrect readings to the ECM.
- Wiring Issues: Damaged or corroded wiring connecting the sensor to the ECM can disrupt the signal transmission.
- ECM Malfunction: A problem with the engine control module can also trigger this code, affecting the sensor's operation.
- Timing Chain/Belt Issues: Problems with the timing chain or belt can impact the camshaft's position, leading to sensor errors.
- Poor Electrical Connection: Loose or poor electrical connections at the sensor or ECM can cause intermittent signal disruptions.
Symptoms of P0390 2007 Ford Fusion
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the dashboard.
- Rough Idling: The engine may experience rough idling or vibrations at idle due to incorrect camshaft position readings.
- Decreased Fuel Efficiency: A faulty camshaft position sensor can lead to inefficient fuel delivery, resulting in decreased fuel economy.
- Engine Misfires: Incorrect camshaft position data can cause the engine to misfire, leading to rough running and potential damage to the catalytic converter.
- Stalling: In severe cases, the engine may stall or have difficulty starting due to inaccurate camshaft position information.
How to Fix P0390 2007 Ford Fusion
- Diagnose the Issue: Use a diagnostic scanner to retrieve the trouble code and perform further testing to pinpoint the exact cause of the problem.
- Replace Camshaft Position Sensor: If the sensor is faulty, replace it with a new one following the manufacturer's guidelines.
- Check Wiring: Inspect the wiring harness for any damage or corrosion, repairing or replacing as necessary.
- Test ECM: Verify the ECM's functionality by checking for any error codes or performing a reset if needed.
- Clear Codes: After completing the repair, clear the trouble codes from the ECM memory and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0390 2007 Ford Fusion
The typical repair costs for addressing the P0390 code on a 2007 Ford Fusion can range from $100 to $300, including parts and labor. The cost of the camshaft position sensor itself can vary depending on the brand and quality, typically ranging from $50 to $150. Labor costs at auto repair shops can vary between $80 and $150 per hour, with additional charges for diagnostic time and any necessary repairs. It's advisable to consult with a trusted mechanic or shop for a more accurate estimate based on your specific location and vehicle requirements.
Tech Notes for P0390 2007 Ford Fusion
When is the Code Detected?
Need more information about the P0390 2007 Ford Fusion code?
Need more information on how to fix the P0390 2007 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0390 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0390 2007 Ford Fusion Code
1. What does OBDII code P0390 mean on a 2007 Ford Fusion?
P0390 indicates a malfunction in the Camshaft Position Sensor 'B' Circuit on Bank 2, meaning the sensor is not sending the expected signal to the engine control module (ECM).
2. What are the symptoms of code P0390 in a 2007 Ford Fusion?
Common symptoms include engine misfires, rough idling, reduced power, difficulty starting, poor fuel economy, and the check engine light being illuminated.
3. What causes the P0390 code to appear on a 2007 Ford Fusion?
Potential causes include a faulty camshaft position sensor, damaged wiring or connectors, a failed ECM, or issues with the timing chain or belt.
4. How do I fix the P0390 code on a 2007 Ford Fusion?
Start by inspecting and repairing damaged wires or connectors, replacing the faulty camshaft position sensor, and checking the timing components for alignment issues.
5. Where is the Camshaft Position Sensor 'B' located on a 2007 Ford Fusion?
The Camshaft Position Sensor 'B' is typically found on the engine head, associated with Bank 2 (the side of the engine opposite Bank 1).
6. Can I drive my 2007 Ford Fusion with the P0390 code?
Driving with P0390 can lead to poor engine performance and potential damage. It's best to address the issue promptly.
7. How much does it cost to repair the P0390 code on a 2007 Ford Fusion?
Repair costs vary but typically range from $100 to $300, depending on whether the camshaft position sensor, wiring, or other components need replacement.
8. How do I diagnose the P0390 code on a 2007 Ford Fusion?
Use an OBDII scanner to confirm the code, inspect the wiring and connectors for damage, test the camshaft position sensor, and check the timing components for proper alignment.
9. Can a bad battery or alternator cause the P0390 code on a 2007 Ford Fusion?
While unlikely, electrical issues like a weak battery or failing alternator can cause voltage irregularities that affect sensor performance.
10. What happens if I ignore the P0390 code on my 2007 Ford Fusion?
Ignoring P0390 can lead to worsening engine performance, potential engine damage, and higher repair costs over time.
Discuss the causes and fixes for P0390 2007 Ford Fusion OBDII Code
Code P0390 2007 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.